JUKI贴片机错误代码.pdf - 第415页
Load a valid file. E3005 Cannot be deleted. " 不能被删除。 " [Cause] Appears if deleting a component w ith which li nkage is establish ed is tried. [Deal] Make sure that no linkage is esta blished with the data to de…
"不能移动贴装头。-- %s"
[Cause]
A holder is placed on an pick position where the head cannot reach.
[Deal]
Reposition the holder to where the head can reach.
E2953 Head can not move to %s - %d.
[Cause]
A feeder is placed on an pick position where the head cannot reach.
[Deal]
Reposition the feeder to where the head can reach.
E2954 %s - %d not used.
[Cause]
A stick is placed on an pick position where the head cannot reach.
[Deal]
Reposition the stick to where the head can reach.
E2955 MTC floor %d not used.
[Cause]
A holder is placed on an pick position where the head cannot reach.
[Deal]
Reposition the holder to where the head can reach.
E3001 “Program edit has already been started up. “
"已经激活编辑程序。"
E3002 “A program error has occurred. “
"发现一个程序错误。"
E3003 A file I/O error has occurred.
"发现一个文件 I/O 错误。"
[Cause]
Failed in loading or saving a file.
[Deal]
Restart the process.
E3004 The file name is incorrect.
"文件名不正确。"
[Cause]
Appears if a file with an invalid extension or a file unavailable for loading is specified.
[Deal]
Load a valid file.
E3005 Cannot be deleted.
"不能被删除。"
[Cause]
Appears if deleting a component with which linkage is established is tried.
[Deal]
Make sure that no linkage is established with the data to delete, and restart the process.
E3006 Circuit protrudes from circuit PWB.
"电路从电路基板上突出了."
[Cause]
Appears if an entered value deviates from the permissible range of the PWB.
[Deal]
Make sure that the value is specified within the permissible range of the PWB, and restart the
process.
E3007 BOC mark limits are exceeded.
"BOC 标记限制过度。"
[Cause]
Appears if the specified PWB data deviates from the permissible entry range indicated by the BOC
marks.
[Deal]
Make sure that the value is specified within the permissible range indicated by the BOC marks, and
restart the process.
E3008 Bad mark limits are exceeded.
"错误标记限制过度。"
[Cause]
Appears if an entered value deviates from the permissible range indicated by the bad marks.
[Deal]
Make sure that the value is specified within the permissible range indicated by the bad marks, and
restart the process.
E3009 Circuit layout data have not been input, so input is not possible.
"电路设置数据不能输入，所以不能输入。"
[Cause]
Appears if mark data is tried to be entered with "No Matrix" selected for the PWB data, and no data
entered for the circuit arrangement.
[Deal]
Provide the circuit arrangement in the PWB data with data, and reenter the mark data.
E3010 Component ID is duplicated.
"组件 ID 被复制。"
[Cause]
Appears if an existing part ID is specified for the mounting data.
[Deal]
Specify a part ID not registered in the existing database.
E3011 '+ =' cannot be used on first line.
"'+='不能在第一线使用。"
[Cause]
Appears if a "+ ="(plus and equal) sign-set is used on the first line of the mounting data.
[Deal]
If data is entered with a "+ =" sign-set specified, the value on the current line is added with the value
on the above line. Use this sign-set on the second line or after.
E3012 '- =' cannot be used on first line.
"'-='不能在第一线使用。"
[Cause]
Appears if a "- ="(minus and equal) sign-set is used on the first line of the mounting data.
[Deal]
If data is entered with a "- =" sign-set specified, the value on the current line is added with the value
on the above line. Use this sign-set on the second line or after.
E3013 There are no data on line above this one.
"在该位置没有数据在线"
[Cause]
Appears if a "+ =" sign-set is used without specifying data at the current cursor position when
entering the mounting data.
[Deal]
Provide the data with a value.
E3014 Initial value has not been input.
"还未输入初值。"
[Cause]
Appears if a "+ =" sign-set is specified without specifying coordinates on the previous line.
[Deal]
Specify coordinates on the previous line.
E3015 Placement position is outside circuit PWB or circuit.
"贴片位置在电路基板和电路的外部。"
[Cause]