JUKI贴片机错误代码.pdf - 第92页
E500003 “ File reading error ” ” 文件读取错误 < % s > “ [ Cause ] Failed to read the data from the file. 读文件失败。 1): The name of the file you tried t o read from. 1): 文件名 [ Treatment ] Please re-install the system. 请重新安装系…
The name of the window that you failed to create.
建立失败的 Window 名。
[Treatment]
There is a possibility that enough working space is not being saved. Please add some more memory
available.
可能内存不足。请增加可用内存。
E500002 “There is no memory enough <%s>“
“文件 I/O 错误<%s>“
[Cause]
An error occurred while reading the data from or writing the date in the file.
读写文件发生错误。
1): An action that is a cause of the error
1): 发生错误动作
Memory: Getting the production program storage memory
Memory ：生产程序贮存内存
Read File: Reading the production program in.
Read File ：读取生产程序
Write File: Writing into the production program.
Write File ：写入生产程序
Lock File: A lock for the file.
LockFile ：对文件的锁定
Free Memory Releasing the production program storage memory.
Free Memory ：释放生产程序贮存内存
2): Error code 错误代码
9008 : File open error打开文件错误
9009 : File close error关闭文件错误
9010 : File reading error读文件错误
9014 : The file can not be found. 没有发现文件
9020 : Memory saving error内存确保错误
9021 : Memory releasing error内存释放错误
9028 : File in-use error文件使用错误
9029 : File type error文件类型错误
9030 : Parameter error参数错误
[Treatment]
This is a program error. Please make a note of the cause of the error and the error code, then contact
our technical service Dept. for information.
程序错误。请记好括号内的发生动作、错误代码，并与代理店或本公司技朮服务部联系。
E500003 “File reading error”
”文件读取错误 <%s>“
[Cause]
Failed to read the data from the file.
读文件失败。
1): The name of the file you tried to read from.
1): 文件名
[Treatment]
Please re-install the system.
请重新安装系统。
E500004 “The file can not be displayed <Err No : ?>“
“不能显示文件。|<%d> <错误代码 : %d>“
[Cause]
The wordpad that displays an error or a warning in the production program check prior to a
production can not be displayed.
生产开始前的生产程序检查结果(错误或警告信息)，以写字板形式输出的时候发生错误。
[Treatment]
This is a program error. Please make a note of the cause of the error and the error code, then contact
our technical service Dept. for information.
程序错误。请记录错误代码、错误原因代码，并与代理店或本公司技朮服务部联系。
E500005 “There is no memory enough.”
“内存不足。”
[原因]
因内存不足，没有给程序提供足够的工作领域（内存），或建立窗口失败。
[解决]
请关闭不必要的应用程序，使内存增加。
E500006 “System Error!<%s>“
“系统错误！<%s>“
[原因]
起动应用程序时, 在内部功能模块上发生了错误.
错误内容
[解决]
请记好括 No 内的内容, 并与代理店或本公司技朮服务部取得联系。
E500007 “Program directory(FD) can't be found.|Please insert FD.”
“没有发现生产程序目录(软盘)，|请插入软盘。”
[原因]
软驱上没有插入软盘(保存生产程序)。
[解决]
请插入软盘, 保存生产程序， 或者选择[另存为]保存到另一个活页夹里。
E500008 “The file name is not a production program created by the machine.|It is necessary to change in the
file name. Is the file name changed?”
“生产文件名不是本机器的常规文件名，|需要更改文件名，是否更改？”
[原因]
现在读出来的生产程序不是在本机器上所生成的,所以现在的后缀名上不能覆盖。
[解决]
若选择[是]键，就出现[另存为]对话框，这时候把生产程序的后缀名改为本机器所用的后
缀名后，请保存生产程序。
若选择[否]键则不保存生产程序。
E500100 “Incorrect character has been input”
“输入了非法字符。”
[Cause]
You tried to enter incorrect data.
正要输入非法字符。
[Treatment]
Please re-enter correct data.
请正确输入字符。
E500101 “Input range has been exceeded. | The resumption position of a placement point is set outside of the
possible range”
“超过输入范围，|再开始位置被设置在贴片点范围外。”
[Cause]
The entered resumption position of a placement point exceeded the input range.
[Treatment]
Please enter the value that is under the maximum number of placement points.
E500102 “Input range has been exceeded. | (Input range: %ld - %ld)”
“超过输入范围。|(输入范围: %ld - %ld)”
[Cause]
The input value exceeded the input range.
|The maximum and minimum values of the input range.
[Treatment]
Please enter a value that is within the input range.
E500103 “Input range has been exceeded. |(Input range: %s)”
“超过输入范围。|(输入范围: %s)”