JUKI贴片机错误代码.pdf - 第12页
“ 建立 MC 线程 4 。 | 请关闭程序，重新启动。 ” I108150 “ Creating axis-controll ing threads .” “ 正在进 行轴初始化。 ” E108151 “ Failed to Create axis-controlling threads. |Abort the process .” “ 轴初始化失败。 | 请关闭程序，重新启 动。 ” I108160 “ Creating XY-Ro…
Failed to start MC (Machine Control System).
[Treatment]
Please turn on the power supply of the machine after finishing everything and shutting down the
machine.
If the error occurs even after the rebooting, something is wrong with XMP board or other connectors.
Please take a note of the error number and contact our technical service dept. for information.
I108100 “Starting MC sub-system.”
“MC 被启动”
I108110 “Command/Response type IPC objects are created.”
“建立了命令/响应类 IPC 对象。”
E108111 “Failed to create Command/Response typed IPC objects.|Abort the process.”
“建立命令/响应类 IPC 对象失败。|请关闭程序，重新启动。”
I108120 “Mail type IPC objects are created.”
“建立了邮件类 IPC 对象。”
E108121 “Failed to create mail type IPC objects.|Abort the process.”
“建立邮件类 IPC 对象失败。|请关闭程序，重新启动。”
I108130 “Creating MC thread 1(Device Manager).”
“建立 MC 线程 1(设备管理)。”
I108131 “Creating MC thread 2(Scheduler).”
“建立 MC 线程 2(调度程序)。”
I108132 “Creating MC thread 3(Sub-Scheduler).”
“建立 MC 线程 3(补助调度程序)。”
I108133 “Creating MC thread 4.”
“建立 MC 线程 4。”
E108140 “Failed to Create MC thread 1(Device Manager).|Abort the process.”
“建立 MC 线程 1(设备管理)失败。|请关闭程序，重新启动。”
E108141 “Failed to Create MC thread 2(Scheduler).|Abort the process.”
“建立 MC 线程 2(调度程序)失败。|请关闭程序，重新启动。”
E108142 “Failed to Create MC thread 3(Sub-Scheduler).|Abort the process.”
“建立 MC 线程 3(补助调度程序)失败。|请关闭程序，重新启动。”
E108143 “Failed to Create MC thread 4.|Abort the process.”
“建立 MC 线程 4。|请关闭程序，重新启动。”
I108150 “Creating axis-controlling threads.”
“正在进行轴初始化。”
E108151 “Failed to Create axis-controlling threads. |Abort the process.”
“轴初始化失败。|请关闭程序，重新启动。”
I108160 “Creating XY-Robot threads.”
“建立 XY-Robot 线程。”
E108161 “Failed to Create XY-Robot threads.|Abort the process.”
“建立 XY-Robot 线程失败。|请关闭程序，重新启动。”
I108170 “MC initialization has been completed.”
“结束 MC 的初始化。”
I108180 “MC is waiting for MM-side preparation.”
“MC 进入 MM 的准备完毕等待状态。”
I108190 “Creating MC error handler.”
“开始进行 MC 的错误处理。”
E108191 “Failed to Create MC error handler.|Abort the process.”
“MC 错误处理的初始化失败。|请关闭程序，重新启动。”
I108200 “Starting MC.”
“开始进行 MC 的处理。”
I108210 “Ready to complete MC sub-system.”
“进入 MC 的退出准备状态。”
I108220 “Started to complete MC sub-system.”
“开始 MC 的退出处理。”
I108230 “Releasing MC thread 1(Device Manager).”
“释放 MC 线程 1(设备管理)。”
I108231 “Releasing MC thread 2(Scheduler).”
“释放 MC 线程 2(调度程序)。”
I108232 “Releasing MC thread 3(Sub-Scheduler).”
“释放 MC 线程 3(补助调度程序)。”
I108233 “Releasing MC thread 4.”
“释放 MC 线程 4。”
E108240 “Releasing MC thread 1(Device Manager).”
“释放 MC 线程 1(设备管理)失败。”
E108241 “Releasing MC thread 2(Scheduler).”
“释放 MC 线程 2(调度程序)失败。”
E108242 “Releasing MC thread 3(Sub-Scheduler).”
“释放 MC 线程 3(补助调度程序)失败。”
E108243 “Releasing MC thread 4.”
“释放 MC 线程 4 失败。”
I108250 “Releasing axis-controlling threads.”
“释放轴处理。”
E108251 “Failed to Release axis-controlling threads.”
“释放轴处理失败。”
I108260 “Releasing MC sub-system.”
“释放 MC。”
E108280 “Cannot access A drive.|Check if FD is correctly inserted.”
“不能访问为软驱。|请检查软盘”
E108281 “Failed to start driver. %s ( error code: %d )”
“驱动器的启动失败。%S(错误代码:%d)”
E108282 “There is no data to save.”
“没有可保存的数据。”
E108283 “Failed to copy file.”
“文件拷贝失败。”
I108284 “File size exceeds 1 MB limit. The file is split to copy. Copy file No. %d/%d.”
“文件大小超过 1M，分块输出。复制第%d/%d 张。”
Q108285 “Failed to copy file. Do you want to try again?”
“文件拷贝失败，是否再试一次？”
E109000 “Failed to interface with the Axis drivers.”
“连接轴驱动器失败。”
E109001 “Failed to interface with the Safety drivers.”