JUKI贴片机错误代码.pdf - 第95页
E500204 “ Mark data has not been completed ” “ 没有完成标记数据。 ” [Cause] The production can not be started since the Mark data of the Pr oduct ion program t hat is currently loaded on the memory is incomplete. [Treatment] Plea…
E500104 “Input range has been exceeded. |(Input range: %s)”
“超过输入范围。|(输入范围: %s)”
E500200 “PWB data has not been completed”
“没有完成基板数据。”
[Cause]
The production can not be started since the PWB data of the Production program that is currently
loaded on the memory is incomplete.
[Treatment]
Please go to the Production Program Editor and complete the PWB data.
E500201 “Placement data has not been completed”
”没有完成贴片数据。”
[Cause]
The production can not be started since the Placement data of the Production program that is currently
loaded on the memory is incomplete. However, 'complete' here applies only to the placement data that
will actually be placed (the placement data that will be skipped is not included), and production
programs that are considered as 'incomplete' in the Production Program Editor may become
'complete' in the production.
[Treatment]
Please go to the Production Program Editor and complete the Placement data.
E500202 “Component data has not been completed”
”没有完成组件数据。”
[Cause]
The error is likely to happen when starting a production by pressing the START button on the
operation panel. The production can not be started since the PWB data of the Production program that
is currently loaded on the memory is incomplete.
[Treatment]
Please go to the Production Program Editor and complete the PWB data.
E500203 “Pick-up data has not been completed”没有完成吸取数据。”
[Cause]
The production can not be started since the Pick data of the Production program that is currently
loaded on the memory is incomplete. However, 'complete' here applies only to the pick data that will
actually be picked (a pick data which is set to “not use” is not included), and production programs that
are considered as 'incomplete' in the Production Program Editor may become 'complete' in the
production.
[Treatment]
Please go to the Production Program Editor and complete the Pick data.
E500204 “Mark data has not been completed”
“没有完成标记数据。”
[Cause]
The production can not be started since the Mark data of the Production program that is currently
loaded on the memory is incomplete.
[Treatment]
Please go to the Production Program Editor and see the BOC mark setting of the PWB data and the
IC mark setting of the Placement data.
E500205 “Vision data has not been completed”
“没有完成图像数据。”
[Cause]
The production can not be started since the Vision data of the Production program that is currently
loaded on the memory is incomplete.
[Treatment]
Please go to the Production Program Editor and see the Vision data.
E500206 “Teaching of acknowledgment of BOC mark has not been completed”
“识别 BOC 标记示教尚未结束。”
[Cause]
The Recognition teaching of BOC mark the Production program that is currently loaded on the
memory is incomplete.
[Treatment]
Please go to the Production Program Editor and see the Recognition teaching in the PWB data.
[Remarks]
Please note that whether the recognition teaching of BOC marks is done or not will not affect on the
completion status of the PWB data.
E500207 “Teaching of acknowledgment of IC mark has not been completed”
“基板基准领域标记示教尚未结束。”
[Cause]
The Recognition teaching of IC mark the Production program that is currently loaded on the memory
is incomplete.
[Treatment]
Please go to the Production Program Editor and see the IC teaching in the Placement data.
[Remarks]
In a normal production program, a placement data is considered as 'incomplete' when its recognition
teaching of IC mark has not been done. There is a possibility that the production program is broken
when the error occurs.
E500208 “The production program breaks”
“生产程序被破坏。”
[Cause]
Failed to read in the production program file.
[Treatment]
This is a program error. Please make a note of the cause of the error and the error code, then contact
our technical service Dept. for information.
E500209 “A right and left number of positions where the BOC mark is completed recognition.”
“BOC 标记识别结束位置的左右个数不同。”
E500210 “Auto. Select exists in the Pick data. | Production can not be executed”
“吸取数据内存在自动选择，|不能执行生产。”
[Cause]
[Feed] in the Pick data is set to Auto. Select. The production can not be executed.
[Treatment]
You need either to execute the Optimization in the Production Program Editor or to set pick positions.
E500211 “There is no data which placement is specified”
“不存在指定的贴片数据。”
[Cause]
This message appears when the trial shot range is set to 'specified placement point' on the Trial
production dialog, but there is no placement data.
[Treatment]
Please select other trial shot range or go back to the Production Program Editor to examine the
Placement data.
E500212 “There is no pick point on both left and right sides in Fully Synchronized mode”
“或许是完全同时进行的生产程序，对应两个 Head 指定贴片数据上，不存在左右吸取点。”
[Cause]
There is a component which pick point exists only on one side.
[Treatment]
Please go to the Production Program Editor and see the Pick data.
E500213 “The program can not be produced in the <%s> Production mode”
“在生产模式<%s>上，不能生产的程序。”
[Cause]
The production can not be performed with the specified production mode.
Production mode
Input order
Optimization order