JUKI贴片机错误代码.pdf - 第269页
E620054 “ Feeder sensor stopped.Ser vo is in the free state .” “ 因传送 带浮动而停止。未使用伺服。 ” I620055 “ Servo is in the free state .” “ 未使用 发生 ” E620056 “ Servo free error .” “ 关闭发 生错误。 ” E620057 “ Air pressure sensor alarm. Igno…
E620039 “I/O LibEntry initialization failed.”
“I/O LibEntry 初始化失败。”
E620040 “Safety LibEntry initialization failed.”
“Safety LibEntry 初始化失败。”
E620041 “LibEntry initialization failed.”
“LibEntry 初始化失败。”
E620042 “Initialization timer failed.”
“更新过去数据时间初始化失败。”
E620043 “Reading E-Stop Status failed.”
“读取紧急停止状态失败。”
E620044 “Reading XY-Alarm Status failed.”
“读取 XY 警报状态失败。”
E620045 “Reading ZT-Alarm Status failed.”
“读取 Zθ警报状态失败。”
E620046 “Waiting for Asynchonous event failed.”
“进入异步事件等待状态失败。”
E620047 “Getting Asynchronous information failed.”
“取得异步情报失败。”
E620048 “Filtering asynchronous information failed.”
“选择处理异步情报失败。”
E620049 “Asynchronous system i/o error. Cannot clear input flags.”
“异步系统 I/O 错误，不能删除输入标记。”
E620050 “Asynchronous system error. Cannot set information.”
“异步系统内部处理错误，不能保存输入的情报。”
E620051 “Exit Worker thread .”
“退出工作线程。”
E620052 “Open SETUP Data failed.”
“打开配置数据失败。”
E620053 “FAN STOP.”
“风扇被停止。”
E620054 “Feeder sensor stopped.Servo is in the free state.”
“因传送带浮动而停止。未使用伺服。”
I620055 “Servo is in the free state.”
“未使用发生”
E620056 “Servo free error.”
“关闭发生错误。”
E620057 “Air pressure sensor alarm. Ignore?”
“发现气压下降，是否忽略?”
E620058 “The power failure was detected.|Re-starting of a system is required.|Please re-switch on a power
supply after a shutdown.”
“检测出停电，请关闭电源后，重新起动。”
E620059 “Communication error of Axis occurred.”
“轴通讯出错。”
E620060 “DTS supply key.”
“DTS 供给组件按钮被按下。”
E620061 “XH driver alarmed.”
“XH 轴驱动警报。”
E630001 “ViLib Entry : Failed in initializing.”
“ViLib 错误:|ViLibEntry 初始化失败”
[Cause]
You tried to get several vision device drivers started at one time.
More than one application are running.
[Treatment]
Please re-start the application.
E630002 “ViLib Entry : UN-initializing error occurred”
“ViLib 错误:|未做 ViLibEntry 初始化, 调用 ViLibEntry”
[Cause]
You tried to use a vision device driver without initializing it.
More than one application are running.
[Treatment]
Please re-start the application.
E630003 “ViLib Thread: Driver Failed to get Thread starated”
“ViLib 错误:|ViLib 起动线程失败”
[Cause]
Failed to initialize a vision device driver internally.
Device manager did not get started properly.
[Treatment]
Please re-boot your machine.
E630010 “There is no empty space in the Vision Resource Semaphore”
“ViLib 错误:|没有信号登录”
[Cause]
A vision device driver did not get started properly.
You tried to get several vision device drivers started at one time.
[Treatment]
Please re-boot your machine.
E630011 “ViLib Thread: Failed in registration of bass interrupting”
“ViLib 错误:|总线中断的登录失败”
[Cause]
A vision device driver did not get started properly.
You tried to get several vision device drivers started at one time.
[Treatment]
Please re-boot your machine.
E630012 “ViLib Thread: Failed to open the serial port.”
“ViLib 错误:|打开串行端口失败。”
[Cause]
COM port does not return any response.
Another application is using COM port.
[Treatment]
Please re-start the application.
E630050 “ViLib Entry: IPC Send Error(Entry->Thread) occurred”
“ViLib 错误:|IPC 发送信息包错误(Entry->DriverThread)”
[Cause]
Failed in IPC transmission to the vision device driver.
The vision device driver is HOLT.
[Treatment]
Please re-boot your machine.
E630051 “ViLib Entry: IPC Receive Error(Entry<-Thread) occurred”
“ViLib 错误:|IPC 接收信息包错误(Entry<-DriverThread)”
[Cause]