JUKI贴片机错误代码.pdf - 第456页
E6464 Already assigned placement data c hip standing ca nnot be detecte d. " 不能检测到已指定贴片数据的固定 芯片站立。 " [Cause] Indicates that the number of t he mount ing positions has exceede d the maximum value, i.e., checking…
"永久的常驻的吸嘴分配失败。"
E6456 “Permanently resident feeder allocation failed. “
"永久的常驻的进料器分配失败。"
E6457 “Already assigned pick data allocation failed. “
"已经指定的挑选数据分配失败。"
E6458 “A station to which pick data have already been assigned is excluded as an object of partition. “
"已经被指定的选择数据位置作为区分目标被排除."
E6459 “Already assigned placement data allocation failed. “
"已经指定的贴片数据分配失败。"
E6460 The head corresponding to the already assigned placement data cannot be used.
"已分配给位置的相应的头没有使用。"
[Cause]
Indicates that the station specified for the feeder in mounting and absorption data is different from the
allocated station.
[Deal]
Use the automatic selection to specify the station for the mounting data and absorption data for
optimization.
E6461 “The already assigned placement data MTC cannot be used. “
"不能使用已指定贴片数据 MTC。"
E6462 Some pick data are designated in non-distrubutable station.
"不能设置已指定贴片数据吸嘴。"
[Cause]
Indicates that the data for the absorbing point specification has been already used for the occupation
data.
[Deal]
Use the automatic selection to specify the station for the mounting data and absorption data for
optimization.
E6463 Some placement data are designated in non-distributable station.
"已指定的贴片数据贴片层相互矛盾。"
[Cause]
Indicates that the data for mounting specification is allocated for more than one station.
[Deal]
Use the automatic selection to specify the station for the mounting data and absorption data for
optimization.
E6464 Already assigned placement data chip standing cannot be detected.
"不能检测到已指定贴片数据的固定芯片站立。"
[Cause]
Indicates that the number of the mounting positions has exceeded the maximum value, i.e., checking
the occupation data was failed.
[Deal]
Decrease the number of mounting positions.
E6465 Already assigned placement data chip standing cannot be detected.
[Cause]
Indicates that inconsistency was found in the layer specification.
[Deal]
Reset the layer allocation for optimization.
E6500 “Data cannot be assigned to machine station. “
"数据不能被指定到机器位置。"
E6550 Failed to distribute data.
"没有%d 数据能被指定到机器位置。"
[Cause]
An invalid data was found during data allocation for the mounting or absorption list. (See the sub-list
for details.)
(Detailed messages corresponding to each station.)-Unavailable for specification since it is an
applicator. Type 770 or 775 station.
-Unavailable for dividing destinations. Station with the balance option check is disabled or 0 balance.
-MTC is disabled. Station unavailable for using MTC.
-MTS is disabled. Station unavailable for using MTS.
-Chip standup-detection is disabled. Station unavailable for chip-standup inspection.
-Coplanarity inspection is disabled. Station unavailable for coplanarity inspection.
-The verification is disabled. Station unavailable for the verification.-IC mark part is disabled. Station
unavailable for IC mark.
-Tray-holder is disabled. Type 770 or 775station.
-Nozzle 5 is disabled. Type 770 or 775 station.
-44 and 56 mm feeders are disabled. Type 770 or 775 station.
-The value specified for the outside dimension deviates from the range and not acceptable. Outside
dimension applied to the centering is out of the range.
-The value specified for the part height deviates from the range and not acceptable. Height applied to
the centering is out of the range.-Every head is disabled. Station with all heads disabled.
-General-purpose head is disabled. Station unavailable for general-purpose head.
-IC head is disabled. Station unavailable for IC head.
-LAIC head is disabled. Station unavailable for LAIC head.
-Specified centering is disabled. Station unavailable for the centering specified.
-Vision centering is disabled. Station unavailable for vision centering.
-ATC has no free space Station having no space for nozzle allocation via optimization.-Placement
nozzle is not used Station with no placement nozzle specified.
-Nozzle resource is insufficient Resource for used nozzle is insufficient.
-Mounting data for layer 1 cannot be allocated Station unavailable for layer 1 allocation with
multi-layer mounting data.
-Mounting data for layer 2 cannot be allocated Station unavailable for layer 2 allocation with
multi-layer mounting data.
-Mounting data for layer 3 cannot be allocated Station unavailable for layer 3 allocation with
multi-layer mounting data.-There is no free space to be allocated. Station having no space for the data
to be absorbed that can be allocated only to the specified station.
-The mounting data has been fully specified. Station with which 2000 or more data were allocated.
-The maximum number of the mounting data has been specified. Station with which 50 or more data
were allocated.
-The maximum number of MTCs has been specified. Station with which 20 or more data were
allocated.
-The maximum number of MTSs has been specified. Station with which 40 or more data pieces were
allocated-The maximum number of the tray-holders has been specified. Station with which 20 or
more data (for 730, 740, 750 and 760), or 5 or more data (for 720) were allocated.
-A value specified deviates from the range. Station whose data specified for absorption deviates from
the area option range.
-The specified data overlaps the range for installing the IC recycle belt. IC recycle belt overlaps the
absorption data.
-The data specified overlaps the range for installing the placement part. Placement part overlaps the
absorption data.-The absorbing positions specified part overlap one another. The absorbing positions
specified part overlap one another.
E6551 Failed to distribute data.
[Cause]
An invalid data was found during data allocation for the mounting or absorption list. (See the sub-list
for details.)
(Detailed messages corresponding to each station)-Unavailable for specification since it is an
applicator. Type 770 or 775 station
-Unavailable for dividing destinations. Station with the balance option check is disabled or 0 balance
-MTC is disabled. Station unavailable for using MTC
-MTS is disabled. Station unavailable for using MTS.