00196044-05 - sg x und x4i fse_en.pdf - 第236页
Gantry Room for Your Sketches and Notes Checking the Y Axis Dynamics S tudent Guide (FSE) SI PL ACE X Series and X4I Gantry Edition 01/2009 EN 236
Gantry
Checking the Y Axis Dynamics Room for Your Sketches and Notes
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN Gantry
235
6.6 Room for Your Sketches and Notes
Gantry
Room for Your Sketches and Notes Checking the Y Axis Dynamics
Student Guide (FSE) SIPLACE X Series and X4I
Gantry Edition 01/2009 EN
236
C&P20A
C&P20 And C&P20A Heads
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN C&P20A
237
7 C&P20A
7.1 C&P20 And C&P20A Heads
7.2 Overview
NOTE:
Older X machines use C&P20 heads. These are not supported by SW70x.
Machines with SW >= 701 only support C&P20A heads. These are marked with a label on the
head.
7-1: Overview of Collect&Place20A head
Legend
1. Star with 20 segments (DP drives)
2. Board for "hold circuit vacuum sensor"
3. Compressed air supply for holding, pickup and
place circuits
4. Cooling for X linear motor (discharged air from
pressure control valve)
5. Z axis return cylinder
6. Z linear motor with measuring system
7. Pressure control valve for pickup and place
circuit
8. Component sensor
9. Star motor with incremental encoder
10. Component Camera