00196044-05 - sg x und x4i fse_en.pdf - 第341页
Collect, Pick and Place Head (CPP) Nozzle Magazines Nozzle Changer (NC) S tudent Guide (FSE) SIPL ACE X Series and X4I Edition 01/2009 EN Collect, Pick and Place Head (CPP) 341 8.6.1 Nozzle Magazines 8.6.1.1 Stru cture o…
Collect, Pick and Place Head (CPP)
Nozzle Changer (NC) Board Descriptions
Student Guide (FSE) SIPLACE X Series and X4I
Collect, Pick and Place Head (CPP) Edition 01/2009 EN
340
8.6 Nozzle Changer (NC)
8-16: Nozzle changer for X machine
Legend
In X series machines, a maximum of twelve nozzle changers are possible for each location,
depending on the machine configuration.
The nozzle changer for the X machines has been extended to include the following functions:
– Magazine ID
– Height query
The nozzle changer carrier can accommodate the various magazine types for the C&P20A and CPP
heads.
The machine recognizes the configured magazines via the magazine query (microswitch).
If the wrong magazines are configured for the head, a warning will be issued to prevent a head crash.
– 10xx magazine: Switch 2 (center) pressed
– 20xx magazine: Switches 1 and 3 pressed
– 28xx magazine: Switches 1, 2 and 3 pressed
(1) Nozzle changer carrier (2) Microswitch 1, 2 and 3 for magazine query
(3) Actuator for opening and closing the NC
magazine
(4) Unlocking lever for NC magazine
(5) Fixture clips for NC magazines
Collect, Pick and Place Head (CPP)
Nozzle Magazines Nozzle Changer (NC)
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN Collect, Pick and Place Head (CPP)
341
8.6.1 Nozzle Magazines
8.6.1.1 Structure of 20xx Nozzle Magazines
8.6.1.2 Structure of 28xx Nozzle Magazines
Legend
1. 20xx magazine (CPP)
2. 28xx magazine (CPP)
3. 10xx magazine (C&P20A)
4. Magazine query switch 1, 2 and 3
12 garages per magazine
Antirotation guard for nozzles
Special nozzles up to a max. length of
16.5 mm
Two fiducials per magazine
Legend
1. Five garages for nozzles with a length of up to
12.5 mm (garages 1, 5, 6, 8, 9)
2. Four garages for special nozzles with a length
of up to 16.5 mm (garages 2, 3, 4, 7)
3. Level surface – this is used by special nozzles
for orientation purposes, when they are
nonsymmetrical. The standard 28xx nozzles
are symmetrical.
Antirotation guard for nozzles
Two fiducials per magazine
Collect, Pick and Place Head (CPP)
Nozzle Changer (NC) Nozzle Stations
Student Guide (FSE) SIPLACE X Series and X4I
Collect, Pick and Place Head (CPP) Edition 01/2009 EN
342
8.6.2 Nozzle Stations
8.6.2.1 Universal Nozzle Station for X Series (X2, X3, X4)
Nozzle station
The C&P20A nozzle station has been extended to include nozzle types for the CPP head:
Reject station for C&P20A and CPP nozzles
Take off for 20xx nozzles
Take off for 28xx nozzles
Reject bin
Components and nozzles can be rejected into the following reject bin:
Reject channel for component size: Up to 6x6 mm
Reject bin in the nozzle station:
– All nozzle types (10xx, 20xx and 28xx nozzles)
– Component size: 6x6 to 27x27 mm
Reject bin together with stationary camera
– Component size: Larger than 27x27 mm
8.6.2.2 Nozzle Stations for X4I
Nozzle Station X4I for C&P20A Head
Legend
1. Take off for 28xx nozzles
2. Reject station for C&P20A and CPP nozzles
3. Take off for 20xx nozzles
4. Take off for 10xx nozzles
Legend
1. Take off for 10xx nozzles
2. Reject station for C&P20A nozzles