00196044-05 - sg x und x4i fse_en.pdf - 第425页
Component Handling Operation X Feeder S tudent Guide (FSE) SIPL ACE X Series and X4I Edition 01/2009 EN Component Handling 425 10.2.7.13 Dat a Menu Calling up the data menu Press the SET Button until you see speed in t…
Component Handling
X Feeder Operation
Student Guide (FSE) SIPLACE X Series and X4I
Component Handling Edition 01/2009 EN
424
10.2.7.12 Menu Transport Speed in the Main Menu
10-24: Setting the transport speed
Component Handling
Operation X Feeder
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN Component Handling
425
10.2.7.13 Data Menu
Calling up the data menu
Press the SET Button until you see speed in the display
Press the FOIL Button long
Back to the main menu
Press the FOIL Button long
10-25: Display in the data menu
Component Handling
X Feeder Operation
Student Guide (FSE) SIPLACE X Series and X4I
Component Handling Edition 01/2009 EN
426
10.2.7.14 Activation and Function in the Service Technician Menu
The menu setting
Service technician
is only temporarily active. If a minute has passed since the
last time a button was pressed, the menu will automatically return to
Standard
and the menu item
Reference
will be hidden again. You then need to reset the setting
Service technician
manually.
The
Service technician
menu includes the item
Reference
as an additional entry. Here you can
start a reference run for the tape drive, if required.
10-26: Service menu for reference run
ATTENTION:
During the reference run with a tape you have to open the pick up window and no foil in the foil
removal unit and you lost components.
X Recommendation: Carry out the reference run with out a tape.