00196044-05 - sg x und x4i fse_en.pdf - 第525页

Head Modularity C&P20A Preperation head plate S tudent Guide (FSE) SIPL ACE X Series and X4I Edition 01/2009 EN Head Modularity 529 13.7.2 C&P20A

Head Modularity

Preperation head plate CPP

Student Guide (FSE) SIPLACE X Series and X4I

Head Modularity Edition 01/2009 EN

528

13.7 Preperation head plate

13.7.1 CPP

NOTE:

This head plate is fitted in machines from number B079 onwards. These differ only in the

extension fitted to the left side.

ATTENTION:

Before a CPP head is fitted, always check the length of the centering pins. These centering pins

may only extend out of the head plate by a maximum of 4.0 mm (tolerance: -0.2 mm). If these

are longer, the incremental disc for the star could be irreparably damaged.

Head Modularity

C&P20A Preperation head plate

Student Guide (FSE) SIPLACE X Series and X4I

Edition 01/2009 EN Head Modularity

529

13.7.2 C&P20A

Head Modularity

Preperation head plate Twin Head

Student Guide (FSE) SIPLACE X Series and X4I

Head Modularity Edition 01/2009 EN

530

13.7.3 Twin Head