00196044-05 - sg x und x4i fse_en.pdf - 第75页
Overview SIPLACE Vision Overview of Components S tudent Guide (FSE) SIPL ACE X Series and X4I Edition 01/2009 EN Overview 75 3.2.8.4 St ationary Component Cameras Flip Chip Camera (Option) SST25 Technical Data NOTE: The …
Overview
Overview of Components SIPLACE Vision
Student Guide (FSE) SIPLACE X Series and X4I
Overview Edition 01/2009 EN
74
Component Camera SST38
Technical Data
3-24: Component camera
Legend
1. Component camera lens system and
illumination
2. Camera amplifier
3. Illumination controller
Component size 0.4x0.2 mm (01005) to 16x16 mm
Components 01005 to 16 mm x 16 mm
PLCC, SO, QFP, TSDP, SOT, MELF, CHIP, IC BGA
Min. ball pitch 250 µm
Min. ball diameter 140 µm
Field of vision 20 mm x 20 mm
Type of illumination Front-lighting (4 levels, programable as required)
Resolution 17 µm/pixels
Camera type.sst 38.sst
Application CPP (option)
Overview
SIPLACE Vision Overview of Components
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN Overview
75
3.2.8.4 Stationary Component Cameras
Flip Chip Camera (Option) SST25
Technical Data
NOTE:
The stationary cameras (IC, FC camera) version ≧ 04 from machine no. B160 also have a
Vision illumination control board for controlling the illumination levels.
Legend
1. Camera housing with integrated camera and
camera amplifier
2. Inside: the 6 illumination and lens levels
The Flip Chip camera (FC camera) has a higher
resolution and therefore covers the remaining
component spectrum for the SMD components.
The FC camera construction is identical with that
of the IC camera, with its 6 illumination levels.
Component size 0.2 mm x 0.2 mm up to 16 mm x 16 mm for single measurement mode
Components 01005, Flip Chip, µBGA, Bare Dies
Minimum lead pitch 0.25 mm
Min. ball pitch 0.14 mm
Min. ball diameter 0.08 mm
Field of vision 19 mm x 19 mm
Type of illumination Front-lighting (6 levels, programable as required)
Resolution 16µm/Pixel
Camera type.sst 25.sst
NOTE:
The stationary camera SST25 is fitted with a multiplexer from version 05 onwards. This enables
you to switch between two stationary cameras. However, the multiplexer is not used in the X
series.
X Note the cable connections!
Overview
Overview of Components SIPLACE Vision
Student Guide (FSE) SIPLACE X Series and X4I
Overview Edition 01/2009 EN
76
IC Camera SST33
Technical Data
Legend
1. Camera housing with integrated camera and
camera amplifier
2. Inside: the 6 illumination and lens levels
Component size 0.5 mm x 0.5 mm up to 55 mm x 45 mm for single measurement mode
Components 0402, MELF, SO, PLCC, QFP, electrolytic capacitors, BGA
Minimum lead pitch 0.3 mm
Min. ball pitch 0.45 mm
Min. ball diameter 0.25 mm
Field of vision 65 mm x 50 mm
Type of illumination Front-lighting (6 levels, programable as required)
Resolution 41µm/Pixel
Camera type.sst 33.sst