00196044-05 - sg x und x4i fse_en.pdf - 第512页
Calibration Room for Your Sketches and Notes Configuring the Nozzle Changer S tudent Guide (FSE) SI PL ACE X Series and X4I Calibration Edition 01/2009 EN 516
Calibration
Configuring the Nozzle Changer Room for Your Sketches and Notes
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN Calibration
515
12.7 Room for Your Sketches and Notes
Calibration
Room for Your Sketches and Notes Configuring the Nozzle Changer
Student Guide (FSE) SIPLACE X Series and X4I
Calibration Edition 01/2009 EN
516
Head Modularity
Important Information
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN Head Modularity
517
13 Head Modularity
See also:
J
12.6.5 Fast Head Exchange [
J
506]
13.1 Important Information
ATTENTION: Head exchange
When replacing the Twin Head with a CPP head with MTC2 in this placement area, you need
to fit a bumper extension, to limit the Y travel range. After switching the machine back on, you
then need to redetermine the machine zero point and the travel ranges.
When you use a Twin Head again, you need to remove the bumper extension.
ATTENTION: Risk of head crash!
When installing a CPP head with a stationary camera, this needs to be fitted in the top position,
otherwise there is a risk of a head crash!