00196044-05 - sg x und x4i fse_en.pdf - 第414页
Component Handling X Feeder X F eeder Parts (Back View) S tudent Guide (FSE) SI PL ACE X Series and X4I Component Ha ndling Edition 01/2009 EN 414 10.2.3 X Feeder Parts (Back V iew) 10-12: X feeder parts Legend 1 Entry a…
Component Handling
X Feeder Parts (Front View) X Feeder
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN Component Handling
413
10.2.2 X Feeder Parts (Front View)
10-11: X feeder parts (front view)
Legend
10.2.2.1 X Splice Sensor Note
1 Locking roll (the locking hook of the changeover
table locks the feeder and locking roll in the end
position.)
7 Opening of the tape channel
2 Power- and Data interface 8 Drive motor for the cover foil unit
3 Centering pin "front" 9 Cover foil rocker
4 Lever to lift the Pickup window to insert and
remove the tape
10 Foil removal unit
5 Pick up window 11 Centering pin "back"
6 Drive motors for tape transport 12 Adjustment of the cover foil tension
NOTE:
X splice sensors are mounted as an option, directly behind the pickup position of the X feeder
and communicate via the feeder CAN Bus --> machine CAN Bus with the station software.
Component Handling
X Feeder X Feeder Parts (Back View)
Student Guide (FSE) SIPLACE X Series and X4I
Component Handling Edition 01/2009 EN
414
10.2.3 X Feeder Parts (Back View)
10-12: X feeder parts
Legend
1 Entry aperture to the tape feed channel with
tape spring
6 Shutter for component removal
2 Cover for the foil container 7 Guidance feeder at the changeover table (front)
3 Foil container with cutter, to cut the foil 8 Guidance feeder at the changeover table (back)
4 Button, to remove the feeder 9 Label which described the different pick up
positions depend on the component size
5 Operator panel 10 Data plate
Component Handling
Overview Feeder Types X Feeder
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN Component Handling
415
10.2.4 Overview Feeder Types
10.2.5 Track Width Assignment for X Feeder Types
10-13: Track Width Assignment for X Feeder Types
Tape feeder
module
Item number Feeder width Number of tracks
occupied
Maximum tape material height
(overall)
8 mm X 00141270 10.8 mm 1 1.6 mm paper
3.5 mm blister
12 mm X 00141271 22.4 mm 2 6.5 mm blister
16 mm X 00141272 34.4 mm 3 25 mm blister
24 mm X 00141273 34.4 mm 3 25 mm blister
32 mm X 00141274 45.8 mm 4 25 mm blister
44 mm X 00141275 57.8 mm 5 25 mm blister
52 mm X 00141276 69.8 mm 6 25 mm blister
72 mm X 00141277 81.6 mm 7 25 mm blister
88 mm X 00141278 105.2 mm 9 25 mm blister