00196044-05 - sg x und x4i fse_en.pdf - 第444页
Modular Conveyor Function Description Conveyor Modes S tudent Guide (FSE) SI PL ACE X Series and X4I Modular Conveyor Edition 01/2009 EN 444 1 1.1.14 Conveyor Modes 1 1.1.14.1 Overview of Flexible Single Conveyor 11-3: W…
Modular Conveyor
Structure Function Description
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN Modular Conveyor
443
11.1.13.3 Structure of Quad Lane Conveyor
Legend
The quad lane conveyor has 4 lanes. Conveyor lane 1 is divided into lanes 1L and 1R while conveyor
lane 2 is divided into lanes 2L and 2R.
This conveyor option allows you to produce a complete product with top and bottom sides on the same
conveyor lane. At the same time, another complete product can be produced on the second main lane.
11.1.13.4 Differences Between the X Series and X4I Conveyors With SW70x
Each conveyor side has a fiducial for calibration of the fixed PCB reference corner (from SW70x).
The conveyor and stop position (laser light barrier) in PA1 have been moved 70 mm in the direction
of the input conveyor (max. board length 380 mm).
The length of the bumper under the lifting table plate has been changed from 20 mm to 35 mm. -->
Reduces the transportation times.
Changed setting values for the lifting table times
Changed conveyor zero point and coordinate system with introduction of SW70x
Station software 70x now makes various conveyor modes possible (right, left, outer – fixed conveyor
side).
Conveyor control with switch setting for X4I
(1R) Conveyor lane 1 right (1L) Conveyor lane 1 left
(2R) Conveyor lane 2 right (2L) Conveyor lane 2 left
(T) Transport direction
Modular Conveyor
Function Description Conveyor Modes
Student Guide (FSE) SIPLACE X Series and X4I
Modular Conveyor Edition 01/2009 EN
444
11.1.14 Conveyor Modes
11.1.14.1 Overview of Flexible Single Conveyor
11-3: Width of single conveyor
Legend
1. Single conveyor "Standard", max. width
1x460mm
2. Single conveyor "excess width", max. width
1 x 508 mm
3. Fixed conveyor side on right
4. Lane 1
5. Board
Modular Conveyor
Conveyor Modes Function Description
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN Modular Conveyor
445
11.1.14.2 Overview of Dual Conveyor as Single Conveyor
11-4: Dual conveyor as single conveyor
See also:
J
11.3.2 Setting the Fixed Conveyor Side (from SW701) [
J
452]
NOTE:
A dual conveyor as single conveyor is possible for conveyor lanes 1 or 2
Conveyor lane 1 is used with the button on the right or outer side.
Conveyor lane 2 is used with the button on the left.
The term
Position 'xxx.x'
in the diagram refers to the buttons in the station software, for setting
the fixed conveyor side.