00196044-05 - sg x und x4i fse_en.pdf - 第76页
Overview Overview of Components SIPLACE Vision S tudent Guide (FSE) SI PL ACE X Series and X4I Overview Edition 01/2009 EN 76 IC Camera SST33 Technical Data Legend 1. Camera housing with inte grated camera and camera amp…
Overview
SIPLACE Vision Overview of Components
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN Overview
75
3.2.8.4 Stationary Component Cameras
Flip Chip Camera (Option) SST25
Technical Data
NOTE:
The stationary cameras (IC, FC camera) version ≧ 04 from machine no. B160 also have a
Vision illumination control board for controlling the illumination levels.
Legend
1. Camera housing with integrated camera and
camera amplifier
2. Inside: the 6 illumination and lens levels
The Flip Chip camera (FC camera) has a higher
resolution and therefore covers the remaining
component spectrum for the SMD components.
The FC camera construction is identical with that
of the IC camera, with its 6 illumination levels.
Component size 0.2 mm x 0.2 mm up to 16 mm x 16 mm for single measurement mode
Components 01005, Flip Chip, µBGA, Bare Dies
Minimum lead pitch 0.25 mm
Min. ball pitch 0.14 mm
Min. ball diameter 0.08 mm
Field of vision 19 mm x 19 mm
Type of illumination Front-lighting (6 levels, programable as required)
Resolution 16µm/Pixel
Camera type.sst 25.sst
NOTE:
The stationary camera SST25 is fitted with a multiplexer from version 05 onwards. This enables
you to switch between two stationary cameras. However, the multiplexer is not used in the X
series.
X Note the cable connections!
Overview
Overview of Components SIPLACE Vision
Student Guide (FSE) SIPLACE X Series and X4I
Overview Edition 01/2009 EN
76
IC Camera SST33
Technical Data
Legend
1. Camera housing with integrated camera and
camera amplifier
2. Inside: the 6 illumination and lens levels
Component size 0.5 mm x 0.5 mm up to 55 mm x 45 mm for single measurement mode
Components 0402, MELF, SO, PLCC, QFP, electrolytic capacitors, BGA
Minimum lead pitch 0.3 mm
Min. ball pitch 0.45 mm
Min. ball diameter 0.25 mm
Field of vision 65 mm x 50 mm
Type of illumination Front-lighting (6 levels, programable as required)
Resolution 41µm/Pixel
Camera type.sst 33.sst
Overview
C&P20A Head Overview of Components
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN Overview
77
3.2.9 C&P20A Head
Technical Data
Legend
1. Star with 20 segments (DP drives)
2. Board for "hold circuit vacuum sensor"
3. Compressed air supply for holding, pickup and
place circuits
4. Cooling for X linear motor (discharged air from
pressure control valve)
5. Z axis return cylinder
6. Z linear motor with measuring system
7. Pressure control valve for pickup and place
circuit
8. Component sensor
9. Star motor with incremental encoder
10. Component Camera
Components 01005 to 2220, Melf, SOT, SOD
Max. component size 6 mm x 6 mm x 4 mm (L x W x H)
Min. component size 0.4 mm x 0.2 mm (01005)
Max. weight of component 1 g