YAMAHA 报警资料.pdf - 第135页
Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 135 / 237 Copyright (C) 2009 Y amaha Motor Co.,Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 134 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
unloaded to the next machine. If you will judge as "NG",
the Board will stop at the exit of the conveyor or on the
downstream buffer conveyor. Please check it directly and judge
again.
只要有一个野"NG"，基板会停在送出口
或下冲送上，目基板后，重新行
"OK"或"NG"判。
Ea08717 NG RESULT IN PRINT INSPECTION
NG result occurs in Board inspection for the Board carried
out to exit of the conveyor or to lower buffer conveyor.
Please check the Board directly and judge "OK" or "NG"
for each view.
If you will judge all view as "OK", the Board will be
unloaded to the next machine. If you will judge as "NG",
please remove the Board.
印刷果 NG
送至送出口或下冲送的基板的印刷
果 NG，操作人的判断果也"NG"。
目确印刷果，个野行"OK"或"NG"
判定。如全部野都"OK"，基板会送至
后工序机。只要有 1 个野"NG"，取出基板。
Ea08718 NG RESULT IN PRINT INSPECTION
NG result occurs in Board inspection for the Board carried
out to exit of the conveyor or to lower buffer conveyor.
Please check the Board directly and judge "OK" or "NG"
for each view.
印刷果 NG
送至送出口或下冲送的基板印刷
果 NG，操者人的判定果也"NG"。
目确印刷果，个野重新行"OK"或
"NG"判定。
Ea08719 NG RESULT IN PRINT INSPECTION
NG result occurs in Board inspection for the Board carried
out to exit of the conveyor or to lower buffer conveyor.
Please remove the Board.
印刷果 NG
送至送出口或下冲送的基板的印刷
果 NG，操作人的判断果也"NG"。
取出基板。
Ea08720 Please remove the Board.
NG result occurs in Board inspection for the Board carried
out to exit of the conveyor or to lower buffer conveyor.
取出基板。
送至送出口或下冲送的基板的印刷
果 NG，操作人的判断果也"NG"。
Ea08721 FAILED TO COPY IMAGE
Failed to copy image of Board inspection.
像送失
印刷像的像送已失。
Ea08722 INSPECTION OBJECT DATA OVERFLOW
Overflow of inspection object data occurred.
象数据溢出
象数据在自生成程中，生了象数据的溢出。
Ea08723 PRINT INSPECTION VIEW DATA OVERFLOW
Overflow of print inspection object data occurred.
印刷野数据溢出
印刷野数据在自生成程中，生了印刷野
数据的溢出。
Ea08724 MASK INSPECTION VIEW DATA OVERFLOW
Overflow of mask inspection object data occurred.
网板野数据溢出
网板野数据在自生成程中，生了网板野
数据的溢出。
Ea08725 NG RESULT IN PRINT INSPECTION
NG result occurs in printed Board inspection.
Please judge "OK" or "NG" for each view on the window
which will appear after closing of this error window.
If you will judge all view as "OK", the Board will be
unloaded to the next machine. If you will judge as "NG",
the Board will stop at the exit of the conveyor or on the
downstream buffer conveyor. Please check it directly and judge
again.
印刷果 NG
印刷的行果 NG。
在框之后示的用画面，确个野
印刷果，判定其是"OK"或"NG"。
如全部野了"OK"，基板会送至后工序机。
只要有 1 个野"NG"，基板就会停在送出口或
下冲送上，目后，重新行"OK"或
"NG"判定。
Ea08726 PRINT INSPECTION VISION ERROR
The correction of the board R direction couldn't be transferred
to the vision system.
印刷行
未能向系送基板 R 方向的校正量。
Ea08750 MASK INSPECTION DATA ERROR
Object data couldn't be transferred to the vision system.
Mask Inspection Object Data
网板数据
未能向系送象数据。
网板象数据 号
Ea08751 MASK INSPECTION DATA ERROR
View data couldn't be transferred to the vision system.
Mask Inspection View Data
网板数据
未能向系送野数据。
网板野数据 号
Ea08752 MASK INSPECTION DATA ERROR
The data number of the object data is unusual.
Mask Inspection Object Data
网板数据
象数据的数据号异常。
网板象数据 号
Ea08753 MASK INSPECTION DATA ERROR
The data number of the view data is unusual.
Mask Inspection View Data
网板数据
野数据的数据号异常。
网板野数据 号
Ea08754 MASK INSPECTION DATA ERROR
Object data don't exist.
Mask Inspection Object Data
网板数据
象数据不存在。
网板象数据 号
Ea08755 MASK INSPECTION DATA ERROR
View data don't exist.
Mask Inspection View Data
网板数据
野数据不存在。
网板野数据 号
Ea08756 MASK INSPECTION DATA ERROR
Object data is Skip data.
Mask Inspection Object Data
网板数据
象数据跳状。
网板象数据 号
Ea08757 MASK INSPECTION DATA ERROR
View data is Skip data.
Mask Inspection View Data
网板数据
野数据跳状。
网板野数据 号
Ea08758 MASK INSPECTION VISION ERROR
Vision recognition didn't work normally.
网板行
没有正常作。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 135 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea08759 MASK INSPECTION VISION ERROR
Inspection result couldn't be acquired from the vision system.
网板行
未能从系取得果。
Ea08760 MASK INSPECTION DATA ERROR
Total number of the object data couldn't be transferred to the vision system.
网板数据
未能向系送象数据的数。
Ea08761 MASK INSPECTION DATA ERROR
Total number of the view data couldn't be transferred to the vision system.
网板数据
未能向系送野数据的数。
Ea08763 NG RESULT IN MASK INSPECTION
NG result occurs mask inspection.
网板果 NG
网板的行果 NG。
Ea08764 NG RESULT IN PRINT INSPECTION
NG result occurs in Board inspection for the Board carried out to exit.
Please check the Board directly and judge "OK" or "NG"
for each view.
印刷果 NG
已出的基板，印刷的行果 NG，
操作人的判定果也 NG。
目确印刷果，一野行
OK 或 NG 判定。
Ea08765 NG RESULT IN PRINT INSPECTION
NG result occurs in Board inspection for the Board carried out to exit.
印刷果 NG
已出的基板，印刷的行果 NG，
操作人的判定果也 NG。
Ea08766 FEEDBACK PRINTING TRIGGER
As the result of measurement for each object, the average of area ratio
was smaller than the trigger level for Feedback Printing.
Average of Area Ratio = %6.3f
行多重印刷反
印刷的果:象的平均面比率小于多
印刷反的行面比率。
平均面比率 = %6.3f
Ea08767 FEEDBACK CLEANING TRIGGER
As the result of measurement for each object, the average of area ratio
was bigger than the trigger level for Feedback Cleaning.
Average of Area Ratio = %6.3f
行清反
印刷的果:象的平均面比率超了
清反的面比率。
平均面比率 = %6.3f
Ea08768 FEEDBACK PRINTING FAILURE
As the result of Feedback Printing, the average of area ratio was smaller
than the trigger level for Feedback Printing.
Average of Area Ratio = %6.3f
多重印刷反失
行了多重印刷反，但象的平均面比率未达
到多重印刷反的行面比率。
平均面比率 = %6.3f
Ea08769 PLEASE REMOVE BOARD
The Board carried out to exit of the conveyor or to downstream buffer conveyor
was failed to execute Feedback Printing.
取出基板。
送至送出口或下冲送的基板，
多重印刷反作失的基板。
Ea08770 FEEDBACK PRINTING FAILURE
The Board carried out to exit was failed to execute Feedback Printing.
多重印刷反失了
出的基板多重印刷反作中失的基板。
Ea08771 FEEDBACK PRINTINT FAILURE
As the result of Feedback Printing, the minimum area ratio was smaller
than the trigger level for Feedback Printing.
Minimum Area Ratio = %6.3f
Index = %d
多重印刷反失
行了多重印刷反，但象中的最小面
比率未达到多重印刷反的行面比率。
最小面比率 = %6.3f
象号 = %d
Ea08772 FEEDBACK PRINTINT TRIGER
As the result of measurement for each object, the minimum area ratio
was smaller than the trigger level for Feedback Printing.
Minimum Area Ratio = %6.3f
Index = %d
多重印刷反行
印刷果:象中的最小面比率
未达到多重印刷反的行面比率。
最小面比率 = %6.3f
象号 = %d
Ea08773 FEEDBACK CLEANING TRIGER
As the result of measurement for each object, the minimum area ratio
was bigger than the trigger level for Feedback Cleaning.
Minimum Area Ratio = %6.3f
Index = %d
清反行
印刷果:象中的最大面
比率超了清反的行面比率。
最大面比率 = %6.3f
象号 = %d
Ea08775 Print inspection image preservation error
The time-out was generated while preserving the print inspection image.
Please confirm the image output folder path of the option setting.
印刷像保存
保存印刷像的程中生了超。
确置的像出文件的路径。
Ea08780 MASK SCAN VISION ERROR
Recognition parameter couldn't be transferred to the vision system.
网板描行
无法将像理参数至系。
Ea08781 MASK SCAN VISION ERROR
The result of mask scan couldn't be cleared.
网板描行
无法使网板描果初始化。
Ea08782 MASK SCAN VISION ERROR
Vision recognition didn't work normally.
网板描行
没能正常作。
Ea08783 MASK SCAN VISION ERROR
Vision recognition didn't work normally.
网板描行
冲像，没能正常作。
Ea08784 MASK SCAN OBJECT DATA OVERFLOW
Overflow of object data created by mask scan occurred.
Please specify smaller area and retry again.
网板描象数据溢出
网板描中的象数据溢出了。
小网板描范。
Ea08785 MASK SCAN VISION ERROR
The total number of object data couldn't be received from
the vision system.
网板描行
无法从系取象数据数。
Ea08786 MASK SCAN VISION ERROR
The result of mask scan couldn't be received from the vision system.
网板描行
无法从系取果。
Ea08787 MASK SCAN VIEW DATA OVERFLOW
Overflow of view data because specified area of mask scan
is too big.
Please specify smaller area and retry again.
网板描野数据溢出
因网板描范大，所以在自生成网板描野数据的
程中，野数据溢出了。
小网板描范。
Ea08788 SOFT LIMIT OVER OF MASK SCAN POSITION. 网板描野位置超出了极限
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 136 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Mask scan position is out of Soft Limit.
Please change the range of mask scan.
网板描野位置在极限范外。
更改网板描范。
Ea08800 DATABASE ERROR
Machine cannot set Mark data,
because Mark type is not "fiducial"
Database No.
数据信息置
指定号的数据的型不是基准，
所以不能置。
数据号
Ea08810 DATA CHECK ERROR
Print Inspection data Error
View data which cope with object data don't exist.
Print Inspection Object Data
Print Inspection View Data
程序
印刷数据。
不存在与象数据相的野数据。
印刷象数据 号
印刷野数据 号
Ea08811 DATA CHECK ERROR
Mask Inspection data Error
View data which cope with object data don't exist.
Mask Inspection Object Data
Mask Inspection View Data
程序
网板数据。
不存在与象数据相的野数据。
网板象数据 号
网板野数据 号
Ea08820 BOARD TRANSFER TIMEOUT ERROR
Failed to load the board from previous machine to upper conveyor.
There is possibility that the board exists on the upper conveyor,
or on the exit of the previous machine's conveyor.
Please check the upper conveyor and remove the board.
基板送超
向入送入口的基板入失了。
上流机送和入送的中部、或入送上可能存在基板。
确入送，如存在基板，取出。
Ea08821 BOARD TRANSFER TIMEOUT ERROR
Failed to load the board from wait position to print position.
There is possibility that the board exists on the upper conveyor,
or main conveyor.
Please check the upper conveyor and the main conveyor.
基板送超
自待机位置向印刷位置的基板送失了。
送和主送的中部上可能存在基板。
Ea08822 BOARD TRANSFER TIMEOUT ERROR
Failed to load the board from print position to exit position.
There is possibility that the board exists on the main conveyor,
or lower conveyor.
Please check the main conveyor and the lower conveyor.
基板送超
自印刷位置向出口位置的基板送失了。
主送和出送的中部上可能存在基板。
Ea08823 BOARD TRANSFER TIMEOUT ERROR
Failed to load the board from exit to next machine.
There is possibility that the board exists on the lower conveyor,
or the entrance of the next machine's conveyor.
Please check the lower conveyor and remove the board.
基板送超
自出送出口的基板出失了。
出送和下流机送的中部、或出送上可能存在基板。
确出送，如存在基板，取出。
Ea08824 BOARD TRANSFER ERROR
Failed to load the board, because the unexpected board exists
on the conveyor.
Please remove the board when the position of the following
board detect sensors is confirmed, and the board exists.
(1) Entrance of the upper conveyor
(2) Wait position of the upper conveyor
基板送
因送上存在定数以上的基板，所以基板送失了。
确下列基板感器的位置，如存在基板，取出。
(1) 入送 入口
(2) 入送 待机位置
Ea08825 BOARD TRANSFER ERROR
Failed to load the board, because the unexpected board exists
on the conveyor.
Please remove the board when the position of the following
board detect sensors is confirmed, and the board exists.
(1) Wait position of the upper conveyor
(2) Printing position of the main conveyor
基板送
因送上存在定数以上的基板，所以基板送失了。
确下列基板感器的位置，如存在基板，取出。
(1) 入送 待机位置
(2) 主送 印刷位置
Ea08826 BOARD TRANSFER ERROR
Failed to load the board, because the unexpected board exists
on the conveyor.
Please remove the board when the position of the following
board detect sensors is confirmed, and the board exists.
(1) Exit of the upper conveyor
(2) Printing position of the main conveyor
基板送
因送上存在定数以上的基板，所以基板送失了。
确下列基板感器的位置，如存在基板，取出。
(1) 入送 出口
(2) 主送 印刷位置
Ea08827 BOARD TRANSFER ERROR
Failed to load the board, because the unexpected board exists
on the conveyor.
Please remove the board when the position of the following
board detect sensors is confirmed, and the board exists.
(1) Entrance of the upper conveyor
(2) Printing position of the main conveyor
基板送
因送上存在定数以上的基板，所以基板送失了。
确下列基板感器的位置，如存在基板，取出。
(1) 入送 入口
(2) 主送 印刷位置
Ea08828 BOARD TRANSFER ERROR
Failed to load the board, because the unexpected board exists
on the conveyor.
Please remove the board when the position of the following
board detect sensors is confirmed, and the board exists.
(1) Entrance of the upper conveyor
(2) Exit of the upper conveyor
基板送
因送上存在定数以上的基板，所以基板送失了。
确下列基板感器的位置，如存在基板，取出。
(1) 入送 入口
(2) 入送 出口
Ea08829 BOARD TRANSFER ERROR 基板送