YAMAHA 报警资料.pdf - 第65页

Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 65 / 237 Copyright (C) 2009 Y amaha Motor Co., Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…

100%1 / 237
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 64 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea02608 BACKUP PIN MATRIX DATA FILE READ ERROR
Failed to read Backup Pin Matrix data file.
󳕋󳅝位置信息文件󲣐入󳇮󲣄
󳕋󳅝位置信息文件的󲣐入已失󲧺。
Ea02609 BACKUP PIN MATRIX DATA FILE WRITE ERROR
Failed to write Backup Pin Matrix data file.
󳕋真位置信息文件写入󳇮󲣄
󳕋󳅝位置信息文件的写入已失󲧺。
Ea02610 DETACH SPEED TABLE FILE READ ERROR
Failed to read Detach Speed table file.
离版速度更󰀷表文件󲣐入󳇮󲣄
离版速度更󰀷表文件的󲣐入已失󲧺。
Ea02611 DETACH SPEED TABLE FILE WRITE ERROR
Failed to write Detach Speed table file.
离版速度更󰀷表文件写入󳇮󲣄
离版速度更󰀷表文件的写入已失󲧺。
Ea02612 SCHEDULE SETTING FILE READ ERROR
Failed to read Schedule Setting file.
󲣘度表󲢓置文件󲣐入󳇮󲣄
%s 󲣘度表󲢓置文件的󲣐入已失󲧺。
Ea02613 SCHEDULE SETTING FILE WRITE ERROR
Failed to write Schedule Setting file.
󲣘度表󲢓置文件写入󳇮󲣄
%s 󲣘度表󲢓置文件的写入已失󲧺。
Ea02614 LOG HALFWAY DATA FILE READ ERROR
Failed to read Log Halfway file.
日志中断信息文件󲣐入󳇮󲣄
日志中断信息文件的󲣐入已失󲧺。
Ea02615 LOG HALFWAY DATA FILE WRITE ERROR
Failed to write Log Halfway file.
日志中断信息文件写入󳇮󲣄
日志中断信息文件的写入已失󲧺。
Ea02616 FILE READ ERROR
Failed to read Wafer Nozzle Specification.
文件󲣐入󳇮󲣄
晶片吸嘴󲚙格的󲣐入已失󲧺。
Ea02617 FILE WRITE ERROR
Failed to write Wafer Nozzle Specification.
文件写入󳇮󲣄
晶片吸嘴󲚙格的写入已失󲧺。
Ea02618 FILE READ ERROR
Failed to read Laser Height Specification.
文件󲣐入󳇮󲣄
激光高度󰨠量󲚙格的󲣐入已失󲧺。
Ea02619 FILE WRITE ERROR
Failed to write Laser Height Specification.
文件写入󳇮󲣄
激光高度󰨠量󲚙格的写入已失󲧺。
Ea02620 FILE READ ERROR
Failed to read Evt Force Sequence.
文件󲣐入󳇮󲣄
󲧴荷控制作流程的󲣐入已失󲧺。
Ea02621 FILE WRITE ERROR
Failed to write Evt Force Sequence.
文件写入󳇮󲣄
󲧴荷控制作流程的写入已失󲧺。
Ea02622 FILE READ ERROR
Failed to read Wafer Station Specification.
文件󲣐入󳇮󲣄
晶片站󲚙格的󲣐入已失󲧺。
Ea02623 FILE WRITE ERROR
Failed to write Wafer Station Specification.
文件写入󳇮󲣄
晶片站󲚙格的写入已失󲧺。
Ea02624 FILE READ ERROR
Failed to read Wafer Ejector Specification.
文件󲣐入󳇮󲣄
晶片上推󳅝󲚙格的󲣐入已失󲧺。
Ea02625 FILE WRITE ERROR
Failed to write Wafer Ejector Specification.
文件写入󳇮󲣄
晶片上推󳅝󲚙格的写入已失󲧺。
Ea02627 FILE READ ERROR
Failed to read the specification file of "PickPosCorrection".
文件󲣐入󳇮󲣄
吸附位置校正󲚙格的󲣐入失󲧺了。
Ea02628 FILE WRITE ERROR
Failed to write the specification file of "PickPosCorrection".
文件写入失󲧺了
吸附位置校正󲚙格的写入失󲧺了。
Ea02629 FILE READ ERROR
Failed to read Board data.
文件󲣐入󳇮󲣄
基板信息的󲣐入失󲧺了。
Ea02630 FILE WRITE ERROR
Failed to write Board data.
文件写入󳇮󲣄
基板信息的写入失󲧺了。
Ea02634 FILE READ ERROR
Failed to read the specification file of "PickRateWarning".
文件󲣐入󳇮󲣄
吸料率警告󲚙格的󲣐入失󲧺了。
Ea02635 FILE WRITE ERROR
Failed to write the specification file of "PickRateWarning".
文件写入󳇮󲣄
吸料率警告󲚙格的写入失󲧺了。
Ea02636 FILE READ ERROR
Failed to read Spring Force Sequence.
文件󲣐入󳇮󲣄
󱡕易󲧴荷控制作流程信息
"SrtForce.sts"的󲣐入失󲧺了。
Ea02637 FILE WRITE ERROR
Failed to write Spring Force Sequence.
文件写入󳇮󲣄
󱡕易󲧴荷控制作流程信息
"SrtForce.sts"的写入失󲧺了。
Ea02639 FILE READ ERROR
Failed to read SideViewCamera.sts
文件󲣐入󳇮󲣄
面󲚛󲚞相机信息
"SideViewCamera.sts"的󲣐入失󲧺了。
Ea02640 Failed to write Board log buffer. 基板履的累󱛄󱯨存󳇮󲣄。
Ea02641 FILE READ ERROR
Failed to read DumpStaion wasted space Specification.
文件󲣐入󳇮󲣄
弃站占有度󲚙格的󲣐入失󲧺了。
Ea02642 FILE WRITE ERROR
Failed to write DumpStaion wasted space Specification.
文件写入󳇮󲣄
弃站占有度󲚙格的写入失󲧺了。
Ea02643 FILE READ ERROR
Failed to read DumpStaion Setting Infomation File.
文件󲣐入󳇮󲣄
弃站的󲢓置文件的󲣐入失󲧺了。
Ea02644 FILE WRITE ERROR
Failed to write DumpStaion Setting Infomation File.
文件写入󳇮󲣄
弃站的󲢓置文件的写入失󲧺了。
Ea02645 FILE READ ERROR
Failed to read Safety Spec File.
文件󲣐入󳇮󲣄
安全󲚙格文件的󲣐入失󲧺了。
Ea02646 FILE WRITE ERROR
Failed to write Safety Spec File.
文件写入󳇮󲣄
安全󲚙格文件的写入失󲧺了。
Ea02647 FILE DELETE ERROR 󲣘度程序任最󱮝行󰋋󳋉文件 除󳇮󲣄
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 65 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Failed to delete SchedleTaskLastDate.ini "SchedleTaskLastDate.ini"的除失󲧺了。
Ea02648 FILE WRITE ERROR
Failed to write SchedleTaskLastDate.ini
󲣘度程序任最󱮝行󰋋󳋉文件 写入󳇮󲣄
"SchedleTaskLastDate.ini"的写入失󲧺了。
Ea02649 FILE READ ERROR
Failed to read SchedleTaskLastDate.ini
󲣘度程序任最󱮝行󰋋󳋉文件 󲣐入󳇮󲣄
"SchedleTaskLastDate.ini"的󲣐入失󲧺了。
Ea02650 CONVEYOR MOTOR ALARM
Control board of conveyor motor detected error.
Motor No.
󰖕出送󳝁达异常
已󰖕出送󳝁达控制基板异常。
󳝁达号󱓖
Ea02651 CONVEYOR TIMEOUT ERROR
Conveyor table axis can not move.
送装置送超󰋋󳇮󲣄
不能移送工作台的󲱉。
Ea02652 INTERLOCK ERROR
You can't move X ,Y ,R or W axis,
because Z axis is not in safe position.
Please check Z axis position.
󱴩󳇖󳇮󲣄
因 Head 的高度在危󳌾的位置，
所以不能移 X、Y、R、W 󲱉。
󲣌将 Head 移到安全的高度。
Ea02653 INTERLOCK ERROR
Z axis is not in a safe position.
Please check Z axis position.
󱴩󳇖󳇮󲣄
Head 的高度在危󳌾的位置。
󲣌将 Head 移到安全的高度。
Ea02654 INTERLOCK ERROR
Moving conveyor cannot move.
The cause is which the following:
1. There is a Board on the edge of the moving conveyor.
2. Sensor reacts to the Head.
Please remove the problem.
󱴩󳇖󳇮󲣄
可送无法移。
<原因>:
1. 可送中󲱁部上有基板。
2. Head 感器有反。
󲣌排除原因。
Ea02655 PS-FEEDER TIMEOUT ERROR
Timeout error occurred, because PS-Feeder was busy.
Please check feeder.
Feeder No.
PS 送料器超󰋋󳇮󲣄
因 PS 送料器在忙碌状，而生了超󰋋󳇮󲣄。
󲣌󰖕󰒺送料器。
送料器号󱓖 号
Ea02656 DATA CHECK ERROR
Some components can not be recognized,
because there is no camera with side light.
Component No.
程序󰖕󰒺󳇮󲣄
󲍒然元件信息中存在使用面照明的元件，
但󲢺机器没有面照明功能，所以不能使用。
元件数据号󱓖 号
Ea02657 DATA CHECK ERROR
Conveyor Spec : Manual Return
Conveyor Direction : L->R
It must be such setting for Cell Production.
Please reconfirm machine setting.
程序󰖕󰒺󳇮󲣄
送送方法：手 U 形
送送方向：左→右
在元生中需󲢓置成上󲢅所示。
󲣌确󲡹机器󲢓置的󲢓置内容。
Ea02658 BOARD DATA ERROR
No nozzle is available.
基板程序󳇮󲣄
没有可以使用的 Nozzle。
Ea02659 BOARD DATA ERROR
A nozzle interferes in the conveyer when mount is carried out
in the specified mount coordinate.
For this machine, in the Y-axis direction, the range of 5mm
from the edge of the Board can't carry out mounting.
Please modify a mount coordinate.
Mount Data
Block Data
基板程序󳇮󲣄
如在指定󲨉装坐󰓜上行󲨉装，
送和吸嘴将相互碰撞。
此机器， Y 方向，从基板的󲲎
端起 5mm 的范内不能󲨉装。
󲣌修改󲨉装坐󰓜。
󲨉装数据 号
拼数据 号
Ea02700 FORCE CONTROL UNIT ERROR
Because it has not finished initializing the force control
unit, the machine cannot start running.
Please check the unit, and try 'Origin' again.
󲧴荷控制装置󳇮󲣄
󲧴荷控制装置的初始化未完成。
󲢺状下机器是不能运行的。
󲣌确󲡹装置，重新行返回原点。
Ea02701 NOZZLE STATION MACS ERROR
Failed to read MACS for Nozzle Station.
Please check mark database number in machine data,
and mark data in mark database.
Database No.
吸嘴交󰀷站 MACS 󳇮󲣄
吸嘴交󰀷站 MACS 的󲣐入失󲧺了。
机器󲢓置的󰓜󲢅数据号󱓖确正确?
确在数据中登了有效的数据?
数据号󱓖 号
Ea02702 NOZZLE STATION MACS ERROR
Failed to execute Nozzle Station MACS.
Please check the machine data,
and mark data in mark database.
吸嘴交󰀷站 MACS 󳇮󲣄
吸嘴交󰀷站 MACS 的作中失󲧺了。
吸嘴交󰀷站 MACS 相的机器󲢓置、
正在参照的󰓜󲢅数据是否有󳇮?
Ea02703 NOZZLE STATION MACS ERROR
Failed to detect Nozzle Station MACS.
Does the MACS look dirty?
or check mark data in mark database.
吸嘴交󰀷站 MACS 󳇮󲣄
吸嘴交󰀷站 MACS 的󲢛失󲧺了。
吸嘴交󰀷站 MACS 是否有󰤶垢?
正在参考的󰓜󲢅数据是否正确?
Ea02704 NOZZLE STATION MACS ERROR
No mark data for Nozzle Station MACS has read.
Please read any Board data again.
吸嘴交󰀷站 MACS 󳇮󲣄
没有吸嘴交󰀷站 MACS 用的󰓜󲢅数据。
󲣌在生󲢓󲡶画面中重新󲣐入基板程序。
Ea02705 NOZZLE HEIGHT INCOMPLETE
The machine cannot start auto-running.
吸嘴高度󰨠量未完成
因吸嘴高度的󰨠量未完成，
所以不能始自运行。
Ea02706 NOZZLE STATION MACS ERROR
Nozzle Station MACS position from the original
吸嘴交󰀷站 MACS 󳇮󲣄
吸嘴交󰀷站 MACS 的󲢛校正异常。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 66 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
is over the limitation.
Does the MACS look dirty?
Pos X (mm)
Pos Y (mm)
有󲣄󲢛的可能，󲣌󲣘󰒺。
校正 X (mm)
校正 Y (mm)
Ea02707 VERIFICATION UN-COMPLETED
There is a part that is not verified during setup.
Start auto-running again after you complete
the setup verification.
校󳝡未󱮨束
存在未校󳝡的元件。
󲣌确󲡹校󳝡后，再次启运行。
Ea02708 START RUNNING WITH THE UN-SAVED DATA
This board data is being edited.
To start auto running, please save the PCB data.
This message is shown in "Setup Check" and "Traceability" function.
正准用未保存的基板程序󲲰行自运行
基板程序正在󱯫󲱦。
如要始自运行，󲣌保存基板程序。
本信息在使用送料器安装位置󰖕󰒺或跟踪功能󰋋才󰌓示。
Ea02709 FAILED TO SAVE TRACEABILITY LOG
Failed to save a traceability log specifiedpath and
also to the spare path.
This message is shown in IT option "Traceability" function.
跟踪日志保存失󲧺
跟踪日志的保存失󲧺了。
本信息在 IT 󲳞󳕎跟踪功能使用󰋋才󰌓示。
Ea02710 INTERLOCK ERROR
You can't change conveyor width,
because push-up unit is up.
󱴩󳇖󳇮󲣄
因󳕋󳅝装置正在上升，所以不能改基板幅。
Ea02711 OPERATION ERROR
Machine can not start auto-running,
because head is down.
Please check head unit.
启始危󳌾
因 Head 下降状，所以不能始运行。
󲣌确󲡹 Head 的状。
Ea02712 OPERATION ERROR
Machine can not start auto-running.
The cause is which the following:
1. There is a Board on the edge of the moving conveyor.
(between entrance and upper-stage)
Please move the Board to safety position.
2. It has the possibility that the sensor detects a head.
Please move the head to the position
where the sensor does not detect it.
启始危󳌾
不能始运行。
<原因>
1. 入口、上流基板台的送中󲱁部上有基板。
󲣌将基板移到安全的位置上。
2. Head 可能感器有反。
󲣌将 Head 移到不感感器的位置上。
Ea02713 OPERATION ERROR
Machine can not start auto-running.
The cause is which the following:
1. There is a Board on the edge of the moving conveyor.
(between upper-stage and lower-stage)
Please move the Board to safety position.
2. It has the possibility that the sensor detects a head.
Please move a head to the position
where the sensor does not detect it.
启始危󳌾
不能始运行。
<原因>
1. 上流、下流基板台的送中󲱁部上有基板。
󲣌将基板移到安全的位置上。
2. Head 可能感器有反。
󲣌将 Head 移到不感感器的位置上。
Ea02714 OPERATION ERROR
Machine can not start auto-running.
The cause is which the following:
1. There is a Board on the edge of the moving conveyor.
(between lower-stage and exit)
Please move the Board to safety position.
2. It has the possibility that the sensor detects a head.
Please move a head to the position
where the sensor does not detect it.
启始危󳌾
不能始运行。
<原因>
1. 下流基板台、出口的送中󲱁部上有基板。
󲣌将基板移到安全的位置上。
2. 󲨉装可能感器有反。
󲣌将基板󲨉装移到不感感器的位置上。
Ea02715 HALFWAY CONTINUE ERROR
Machine can not find Board on mount stage.
This machine needs existing Board on mount stage when
it execute Halfway continue.
Please set Board on mount stage correctly and start
auto run.
中途󲨉装装位置󰖕󰒺
行中途󲨉装的基板，不在装位置上。
󲢺机器行中途󲨉装󰋋，基板必󳕐在装位置上。
󲣌将象基板正确安置在装位置上，然后重新启
运行。
Ea02716 Failed to calibrate Spring force.
Failed to get the parameters for Calibration.
Check the force control specification.
簧󲧴荷校正󳇮󲣄
簧󲧴荷的校正已失󲧺。
未取得󲧴荷校正所必需的参数。
󲣌修改󲧴荷控制󲚙格信息。
Ea02717 CARIBTATION STATION ERROR
detected breakdown from the load cell on the calibration station.
The cause is which the following:
1. calibration station isn't attached to the machine.
2. calibration station is broken.
󲧴荷校正站󳇮󲣄
校正站上的󰨠元件的󲱨入异常。
可能由以下原因造成。
1. 校正站未󲲳接。
2. 校正站󰀴坏等。
Ea02718 FORCE VALUE ERROR
The measurement result of the load value exceeded the tolerance.
The cause is which the following:
1. Nozzle is broken.
2. Head wasn't be able to reach the load cell.
3. Position XYZ of the calibration station are wrong.
Please check the state of nozzle or
󲧴荷󰖕󰨠󳇮󲣄
󲧴荷󰖕󰨠󱮨果已超出容󲢍范。
可能由以下原因造成。
1. 吸嘴󰀴坏。
2. 󲍒󲲰行了󰖕󰨠，但未得到吸嘴高度。
3. 校正站坐󰓜(XYZ)󳇮󲣄。
󲣌修改吸嘴状或者󲧴荷控制󲚙格信息。