YAMAHA 报警资料.pdf - 第45页
Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 45 / 237 Copyright (C) 2009 Y amaha Motor Co., Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 44 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
2.Check the light level or threshold.
3.Check the position of part picked up.
MountData PartsData
Name Comment
Feeder Pos Pallet Pos
Table/Head
3.元件吸附姿。
装数据 号
元件数据 号 名称
注
送料器安装位置 号
料架抽出位置 号
工作台/Head
Ea00935 Side view camera Nozzle basic information transmitting error
When transmitting the nozzle basic information on a side view
camera to Vision, it happen error.
面相机 吸嘴基本信息送
向 Vision 送面相机的吸嘴基本信息，生了某异常。
Ea00936 Side view camera Nozzle detail information transmitting error
When transmitting the nozzle detail information on a side view
camera to Vision, it happen error..
面相机 吸嘴信息送
向 Vision 送面相机的吸嘴信息，生了某异常。
Ea00937 Side view camera setting error
Although the side view camera is set "None" in Installation
Setting, the side view camera is set in Camera Specification.
Please check the machine data.
面相机置
工厂置中置没有面相机，
但相机格中却置了面相机。
Ea00938 Side view camera setting error
Although the side view camera is set "Exist" in Installation
Setting, the side view camera is not set in Camera Specification.
Please check the machine data.
面相机置
工厂置中置有面相机，
但相机格中却没有置面相机。
Ea00939 Side view camera, Nozzle error
It is the nozzle which cannot be used by side view camera recognition.
Please check follows item in machine data.
[Side View Camera Spec]-[Nozzle Basic Setting]-[Side View Camera]
PartsData
面相机 吸嘴
面相机所不能使用的吸嘴。
确机器置中[吸嘴基本置]-[面相机]
的使用状况。
元件数据 号
Ea00940 Side view camera, Part size error
The part size is out of Side view camera size.
Please check part size or Side view camera "Max XY" in machine data.
PartsData
面相机 元件尺寸
行面相机的元件的外形尺寸在范外。
元件数据 号
Ea00941 Side view camera, Part thickness error
The part thickness is out of value which allowed for Normal mode.
The part thickness which allowed for Normal mode is set in follows.
Machine Setting - [Side View Camera Spec]-[General Setting]-
[The minimum part thickness]
Please change Side View Camera to [Detail mode] in Part Information.
PartsData
面相机 元件厚度
元件厚度小于易模式可定的限度。
用易模式可定的元件厚度的置如下。
机器置 - [面相机格]-[全面置]-
[可以易定的最低元件厚度]
将面相机的元件信息置 [有 ]。
元件数据 号
Ea00942 Side view camera, Nozzle recognition error
It cannot recognize part thickness correctly because it failed
nozzle recognition.
Please check correct nozzle is put on head.
If nozzle is correct please try [Measure Nozzles].
面相机 吸嘴形状
因不能正确吸嘴形状，所以不能定元件厚度。
确元件信息中所置的吸嘴是否已正确安装。
如吸嘴安装正确，俘吸嘴形状。
Ea00943 Side view camera, Part thickness range error
Side view [Part Thickness] in Part Information must be
between 0 to [Body Size Z].
Please check [Part Thickness] and [Body Size Z].
PartsData
面相机 元件厚度公差范
元件信息中的面相机的元件厚度公差已置
0 或超出外形尺寸元件厚度的。
确[元件厚度公差]、[外形尺寸元件厚度]。
元件数据 号
Ea00944 SIDE VIEW CAMERA BRING BACK ERROR (AFTER MOUNT)
Side view camera detects bring back parts after mounting.
It may fail to mount parts because of bring back.
Please press [ERROR CLEAR] button, and check the mount position on the board.
TABLE
HEAD
MOUNT
面相机 装后回元件
面相机出，装元件生了回元件的。
因吸嘴上吸附有元件，可能致装失。
点[清除]按，确装位置。
工作台号 号
Head 号 号
装数据
Ea00945 SIDE VIEW CAMERA BRING BACK ERROR (AFTER DUMP)
Side view camera detects bring back parts after dumping.
It may fail to dump parts because of bring back.
Please keep this dialogue displayed and remove parts after EMG stop..
After press [ERROR CLEAR] button, the machine will retry to check bring back
parts.
TABLE
HEAD
MOUNT
面相机 弃后回元件
面相机出，弃元件生了回元件的。
吸嘴可能吸附着元件。
在画面示的状下，按急停机按，然后取出元件。
如按[清除]按，将再次行弃后回元件的。
工作台号
Head 号
装数据
Ea00946 SIDE VIEW CAMERA RETRY SETTING ERROR
The retry setting of the bring back parts is not selected.
Please set the retry setting of all the bring back parts.
[YES] Return to the dialogue to set the retry setting.
[NO] Close dialogue with unselected parts [RETRY].
面相机 重新行作未置
回元件中存在没有确定重新行作的元件。
所有回元件置重新行作。
[是] 置重新行作，返回原来的画面。
[否] 将未置的元件置[有重新行]，并画面。
Ea00947 STOP AUTO RUNNING WITH CYCLE STOP
The machine detect bring back parts during Auto Running.
But it selected [NOT RETRY] in the dialogue and the machine stop by Cycle Stop.
因[装后停止]命令而停止了运行。
装出了回元件，但由于了[不重新行]，
所以[装后停止]了。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 45 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Please press [ERROR CLEAR] button. 点[清除]按。
Ea00948 SIDE VIEW CAMERA BRING BACK RETRY CHECK
Bring back parts error happened on this board.
But it selected skip mounting this parts.
May I continue Auto Running?
[YES] Running start and the board is transported.
[NO] Reset and check the board condition.
完成装的基板确
基板因装状不定生了，
但元件的装已置跳。
运行?
[是] 始运行，入基板。
[否] 行位，确基板。
Ea00949 MOUNTING CONDTION CHECK IS CANCELED
Mounting condition check is canceled.
Setting about retry of error component is disabled.
Press [OK] button and start running then the machine will continue Auto Running.
取消弃元件
在弃元件的途中，操作人出了中止作的指令。
取消弃元件。
在画面点[OK]并按[START]按，取消元件的
装状，并始装。
Ea00950 SIDEVIEW TIMEOUT ERROR
The Application error occurred by sideview action.
datail number
Please stop this action, and retry.
If this error occurred many times, please execute the following.
Trouble of application
- extecute of Parts Adjust - Test.
- none is set to Machine Setting - Side view camera,
and reload board data.
面相机超
在面相机理中生了用件。
datail number
中止理，重新行。
如果反示画面，按照下列指示操作。
·行元件整 - 。
·将机器置 - 工厂置 - 面相机置「没有」。
置完后，重新入基板程序。
Ea00951 SIDE VIEW CAMERA PARTS REVERSE OVER ERROR
Parts are reversing.
Please check the parts and the sequence unit.
MountData
PartsData
Name
Feeder Pos
Pallet Pos
Table/Head
面相机 元件翻
元件正反面反了。
确元件以及元件供装置的状。
装数据 号
元件数据 号
名称
送料器安装位置 号
料架抽出位置 号
工作台/Head 号
Ea00952 SIDE VIEW CAMERA PARTS SIZE ERROR
The shape sizes of parts are outside ranges.
Please check the parts and the component information.
MountData
PartsData
Name
Feeder Pos
Pallet Pos
Table/Head
面相机 元件尺寸
面相机的元件形状尺寸在范外。
确元件以及基板程序的元件信息。
装数据 号
元件数据 号
名称
送料器安装位置 号
料架抽出位置 号
工作台/Head 号
Ea00970 BOARD FILE READ ERROR
It failed in reading the board data.
Cause:
The mount information data is broken.
There is a possibility that the mount data file has been damaged.
Measures:
If you have a backup data, delete the broken data, copy from the backup,
and reload the data.
If you don't, delete the broken data and create new data.
基板程序入
基板程序的入失。
原因:
基板程序的装信息文件的数据异常。
文件有可能破。
策:
如果有基板程序的份，除异常的基板、
将份的制，然后重新入。
如果没有基板程序的份,除异常的基板后，
在新建。
Ea00971 BOARD FILE READ ERROR
It failed in reading the board data.
Cause:
The parts information data and parts data base is broken.
There is a possibility that the mount data file has been damaged.
Measures:
If you have a backup data, delete the broken data, copy from the backup,
and reload the data.
If you don't, delete the broken data and create new data.
If it failed in reading the database, restore the database file from
database backup or system backup.
基板程序入
基板程序入失。
原因:
基板程序的元件信息文件或元件数据的数据异常。
文件有可能破。
策:
如果有基板程序的份，除异常的基板、
将份的制，然后重新入。
如果没有基板程序的份,除异常的基板后，
在新建。
如果入数据失，使用数据的原程序份,
原数据。
Ea00972 BOARD FILE READ ERROR
It failed in reading the board data.
Cause:
The mark information data and mark data base is broken.
There is a possibility that the mount data file has been damaged.
Measures:
If you have a backup data, delete the broken data, copy from the backup,
and reload the data.
If you don't, delete the broken data and create new data.
If it failed in reading the database, restore the database file from
database backup or system backup.
基板程序入__
基板程序入失
原因:
基板程序的信息文件或数据的数据异常。
文件有可能破。
策:
如果有基板程序的份，除异常的基板、
将份的制，然后重新入。
如果没有基板程序的份,除异常的基板后，
在新建。
如果入数据失，用数据的原程序份,
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 46 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
原数据。
Ea00973 BOARD FILE READ ERROR
It failed in reading the machine setting data.
Cause:
The machine configuration data file is broken.
There is a possibility that the mount data file has been damaged.
Measures:
Please restore the machine data.
基板程序入
机器置数据文件的入失。
原因:
机器置文件内的数据异常。
文件有可能破。
策:
使用程序份、原机器数据。
Ea00980 BOARD FILE READ ERROR
It failed in reading the machine setting data.
Cause:
The machine configuration data file is broken.
There is a possibility that the mount data file has been damaged.
Measures:
Please restore the machine data.
基板程序入
机器置数据文件的入失。
原因:
机器置文件内的数据异常。
文件有可能破。
策:
使用程序份、原机器数据。
Ea00989 HEAD SPEC SETTING ERROR
Some heads use a "fixed nozzle" that is not defined
in Head spec information.
Head 格信息置
在 Head 格信息中不可安装的吸嘴
被当作固定吸嘴行了登。
Ea00992 WAFER NOZZLE SPEC FILE READ ERROR
Fail to read the wafer nozzle spec information file.
晶片吸嘴格信息文件的入
晶片吸嘴格信息文件的入已失。
Ea00993 INTERLOCK ERROR
Nozzle detecting sensor on the shaft blow unit detects something.
Please check as followings:
-Some nozzles are on the blow unit?
-The sensor detects something but nozzles?
-The sensor is broken?
In case of YG200, please check the front unit sensor.
吸嘴吸嘴排气装置的吸嘴感器正在感。
确下列目。
-排气装置上是否存在吸嘴。
-感器是否被障碍物遮断。
-感器是否生故障。
YG200 ，前排气装置。
Ea00994 INTERLOCK ERROR
Nozzle detecting sensor on the shaft blow unit detects something.
Please check as followings:
-Some nozzles are on the blow unit?
-The sensor detects something but nozzles?
-The sensor is broken?
-The setting in VmSpec is right?
[Setting]-[Installation Setting]-[Cleanng Blow Unit]
In case of YG200, please check the rear unit sensor.
吸嘴吸嘴排气装置的吸嘴出感器正在感。
确下列目。
-排气装置上是否存在吸嘴?
-感器是否被障碍物遮断?
-感器是否生故障?
-机器置是否符合机器格?
[机器置]-[工厂置]-[吸嘴清排气装置]
YG200 ，后排气装置。
Ea00997 INTERLOCK ERROR
The component may hit neighbor head.
Move the Z axis until error message disappears.
可能与相吸嘴干。
将 Z 移至安全位置。
Ea00999 RETRY active. 正在行重新行。
Ea01023 WARNING: NOT ENOUGH HDD SPACE
Free space on Hard Disk is less
than 10MB. To avoid the possibility
that you cannot save new data anymore
and that data might be lost, it is best
to create new space on the hard disk now.
Copy unused Board data to floppy disks
and delete it from the hard disk.
警告: 硬空不足
硬可用空不足 10MB。
如运行，可能程序会受。
先将基板程序份在上，再将硬上的程序除。
Ea01048 NOZZLE CONDITION ERROR
As a result of vision recognition, the following nozzle
is concluded dirty.
Before auto-running, clean the nozzle, and then execute
this command.
And please check if the tip of the nozzle is broken.
HEAD
吸嘴状
的果，吸嘴有垢。
在始生之前，清吸嘴。
清后，重新确吸嘴的状。
或者，确吸嘴前端是否坏。
装号
Ea01049 VICS TIMEOUT ERROR
The waiting routine for VICS was interrupted by
time-out error.
VICS 超
已中止了系的理等待。
Ea01050 NOZZLE CONDITION CHECK
It finished correctly
and couldn't find trouble on NOZZLES.
吸嘴状确正常束
没有吸嘴异常。
Ea01052 NOZZLE CONDITION ERROR (MOUNT HEAD)
As a result of vision recognition, the following mount
nozzle is concluded dirty.
Before auto-running, clean the nozzle, and then execute
this command.
If the head brings back a component, please reset running
and check the nozzle condition, mount height, valve con-
dition etc.
TABLE
HEAD
吸嘴状(行装的装)
的果施装的吸嘴有垢。
如吸嘴有垢，在生始前行吸嘴清，
并重新确吸嘴的状。
此外，也可能是因元件被回而引起的。
此，立即自运行行位，并确
吸嘴、装高度，状等。
工作台号
Head 号
Ea01053 NOZZLE CONDITION ERROR (DUMP HEAD) 吸嘴状(行弃的装)