YAMAHA 报警资料.pdf - 第166页

Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 166 / 237 Copyright (C) 2009 Y amaha Motor Co.,Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…

100%1 / 237
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 165 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Set from DATABASE has been completed.
From
Database No.
To
Data No.
已制数据信息。
数据号󱓖 号
已制至
数据号󱓖 号。
Ea12541 DATABASE ERROR
Failed to set the data
because data type is different.
数据信息󳇮󲣄
由于数据的󱥐型不同，所以不能󲲰行󲢓置。
Ea12542 Print Inspection Statistics Save
Saving the print inspection statistics...
印刷󰖕󰒺󱮨果合󲡶保存
正在保存印刷󰖕󰒺󱮨果合󲡶...
Ea12543 Undefined data name.
Please input the name of data.
未󲱨入数据名
󲣌󲱨入数据名。
Ea12544 USED PARTS DATABASE NUMBER
Set to Parts-DATABASE.
From
Parts No.
To
Database File
Database No.
Database Parts name
The database number has already been used.
Do you want to replace it?
元件数据号󱓖重
元件数据号󱓖 号
制至
数据文件
数据号󱓖 号
数据元件名称
󲢺数据号󱓖已󱮤使用。
是否覆盖保存?
Ea12545 USED MARK DATABASE NUMBER
Set to Mark-DATABASE.
From
Mark No.
To
Database File
Database No.
Database Mark name
The database number has already been used.
Do you want to replace it?
󰓜󲢅数据号󱓖重
󰓜󲢅数据号󱓖 号
制至
数据文件
数据号󱓖 号
数据󰓜󲢅名称
󲢺数据号󱓖已󱮤使用。
是否覆盖保存?
Ea12546 CONFIRMATION
Do you wish to calibrate the spring load of machine heads ?
Really?
簧󲧴荷校正确󲡹
确要行 Head 的簧󲧴荷校正?
Ea12548 Saving in this file format may result in loss off information.
The dispense temperature setting can't be saved.
Do you wish to save in this format?
以此文件形式存在不能保存全部信息的可能性。
不能󲲰行温度󲢓置。以此形式保存?
Ea12549 CHANGE BOARD COMPLETED
The Board change is completed.
Please check the feeder setup.
基板程序切󰀷󱮨束
已完成基板程序的切󰀷。
󲣌确󲡹送料器位置󲢓置。
Ea12550 PARTS OFFSET DATA OVERWRITE
Parts offset data already exists.
Do you want to update it?
[YES] Update Part Offset to Part data.
[NO] Update Mount Position with Teaching result.
-Parts Offset-
: Parts Data : Previous : This Time :
X:%s
Y:%s
元件中心偏移量的覆盖保存确󲡹
已󱮤󲱨入了元件中心偏移量。
确要替󰀷数据?
󲳞[是] 移到反映到元件数据的流程。
󲳞[否] 将示教󱮨果反映到󲨉装信息中。
-元件中心偏移量-
: 元件数据 : 上次 : 此次 :
X:%s
Y:%s
Ea12551 COULD NOT CONNECT NETWORK COMPUTER
Could not connect to network computer:
%s
不能󲲳接网󱮱
不能󲲳接到网󱮱󲡶算机。
%s
Ea12552 CHANGE DATABASE NUMBER FOR PART
Change Part Information set to Database Number
to DB No. ?
元件信息数据号󱓖的更新
是否将元件信息中所󲢓置的数据号󱓖
更新重新󲳞的 DB No.?
Ea12553 DATABASE ERROR
In Board data, this Inspection data number does not exist.
data No.
数据信息󲢓置󳇮󲣄
指定号󱓖的󰖕󰒺数据不存在。
󰖕󰒺数据号󱓖 号
Ea12554 Do you want to change the Mark name in the Library?
The Library file name and the Mark name are different.
[Yes] The Mark name is changed to the Library
File name and saved.
[No] The Mark name is not changed and saved as it.
[Cancel] Abort.
保存信息󰓜󲢅名?
信息文件名和󰓜󲢅名不一致。
󲳞[是] 将信息󰓜󲢅名更改信息文件名并保存。
󲳞[否] 将󰓜󲢅名直接保存于信息。
󲳞[取消] 什也不做，返回原画面。
Ea12555 Write FD and MD Database All
Is the all-reverse set of the parts & mark data
carried out at a database?
Please press the [OK] button,
when you carry out an all-reverse set.
Please press [Cancel] button,
when you do not carry out an all-reverse set.
是否全部制至数据?
是否将元件·󰓜󲢅数据全部制至数据?
󲲰行全部制󰋋，󲣌按[是]健。
不󲲰行全部制󰋋，󲣌按[取消]健。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 166 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea12556 Write FD Database All
Is the all-reverse set of the parts data
carried out at a database?
Please press the [OK] button,
when you carry out an all-reverse set.
Please press [Cancel] button,
when you do not carry out an all-reverse set.
是否全部制至到数据?
是否将元件数据全部制至数据?
󲲰行全部制󰋋，󲣌按[是]健。
不󲲰行全部制󰋋，󲣌按[取消]健。
Ea12557 Write MD Database All
Is the all-reverse set of the mark data
carried out at a database?
Please push the [OK] button,
when you carry out an all-reverse set.
Please push [Cancel] button,
when you do not carry out an all-reverse set.
是否全部制至数据?
是否将󰓜󲢅数据全部制至数据?
󲲰行全部制󰋋，󲣌按[是]健。
不󲲰行全部制󰋋，󲣌按[取消]健。
Ea12558 CHANGE DATABASE NUMBER FOR MARK
Change Mark Information set to Database Number
to DB No. ?
󰓜󲢅信息数据号󱓖的更新
是否将󰓜󲢅信息中所󲢓置的数据号󱓖
更改所󲳞的数据号󱓖?
Ea12561 PARTS DATABASE SAVE
Parts Database is changed.
Do you want to save changes?
元件数据保存
元件数据数据已更改。
保存?
Ea12562 MARK DATABASE SAVE
Mark Database is changed.
Do you want to save changes?
󰓜󲢅数据保存
󰓜󲢅数据数据已更改。
保存?
Ea12563 PARTS LIBRARY SAVE
Parts Library data is changed.
Do you want to save changes?
元件信息保存
元件信息数据已更改。
保存?
Ea12564 MARK LIBRARY SAVE
Mark Library data is changed.
Do you want to save changes?
󰓜󲢅信息保存
󰓜󲢅信息数据已更改。
保存?
Ea12565 Static Parts SAVE
Static Parts data is changed.
Do you want to save changes?
固定元件保存
固定元件数据已更改。
保存?
Ea12566 Operation start
It corresponds to the following conditions.
- The LED rank table file is not read.
- A combination total is 0.
Do you repeal a "LED RANK INSIDE PLAN" function,
and start operation?
运行始
符合下列条件。
·没有󲣐取 LED 󱭼工作台文件
·󱮙合数 0
使 LED 󱭼工作台文件功能无效
始运行?
Ea12567 Operation is impossible
It corresponds to the following conditions.
- A LED rank table file does not exist.
- Today.csv file analysis failure.
- Combination table creation failure.
- The error in a combination table.
Please check a LED table file,
Today.csv, and board data.
不能运行
符合下列条件。
·LED 󱭼工作台文件不存在
·Today.csv 文件解析失󲧺
·󱮙合工作台生成失󲧺
·󱮙合工作台内󳇮󲣄
󲣌确󲡹 LED 󱭼工作台文件，Today.csv，基板程序。
Ea12568 SHUT DOWN (Windows Mode) 切断󱈊源确󲡹(Windows 模式)
Ea12569 The data format cannot be converted
for the following reason:
- This Board data was expanded using Block Distribution with Note data.
i-Cube 1 doesn't support "Note" data.
Please convert data again after doing "Block Distribute Return".
不能󲱁󰀷数据格式
可能是由以下原因造成的。
- 用有参考而展数据。
i-Cube1 不[参考]数据。
󲣌在行拼返回后，重新󲲰行数据󲱁󰀷。
Ea12570 Initialization process was canceled
Required initialization process was not completed.
Please turn off a power supply.
取消初始化理
如果中途取消初始化理，
无法行初始化所必需
的理，机器控制也不能
正常启。
󲣌󳋂󱈊源。
Ea12571 Barcode character sequence input check.
Please input a barcode character sequence.
条形󱓖字符串的󲱨入确󲡹
󲣌󲱨入条形󱓖字符串。
Ea12573 CONFIRMATION OF PRE-DISPENSING RETRY
The position which performs pre-dispense is in Board.
Do you want to retry ?
󳕙点胶重新行确󲡹
󲲰行󳕙点胶的位置在基板上。
确要重新行?
Ea12574 Now measuring machine dynamic out ... 正在󰖕󰨠机器󲱨出...
Ea12575 Now measuring pick dynamic out ... 正在󰖕󰨠吸附󲱨出...
Ea12576 Warning
A file is copied to the folder of wafer map setup.
警告
将文件制到晶片󲢓置的文件内。
Ea12577 Warning
The copy went wrong.
Please copy a file in board Explorer after teaching completion.
警告
制失󲧺了。
示教󱮨束后，用基板󲨙源管理器制文件。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 167 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea12578 CONFIRMATION OF CLEANING BLOW
Do you want to execute for all nozzle?
[YES] Execute for all auto changing nozzles.
[NO] Execute for nozzle only on the head.
[CANCEL] Abort.
吸嘴吸嘴󲱉排气行的确󲡹
吸嘴吸嘴󲱉󲲰行清󰧖排气。
是否全部吸嘴行?
[是] 全部可自交󰀷的吸嘴行
[否] 当前 Head 上的吸嘴行
[取消] 取消行，返回到原画面
Ea12579 POS information file error.
Failed to open POS information file.
POS 信息文件󳇮󲣄
POS 信息文件的打失󲧺了。
Ea12580 POS information file error.
Failed to read POS information file.
POS 信息文件󳇮󲣄
POS 信息文件的󲣐入失󲧺了。
Ea12581 POS information format error.
Prohibited characters found.
Only the English alphabet and numeric characters
are allowed.
However, numerical portion is only is only
numeric characters and '+','-','.'.
Standard ball number is set only to numeric characters.
Please check the contents of a file.
POS 信息格式󳇮󲣄
存在禁止使用的文字。
只能使用半角英文字母和半角数字。
但数部分只能使用半角数字,'+','-','.'。
基准球号󱓖只能使用半角数字。
󲣌确󲡹文件的内容。
Ea12582 POS information format error.
Ball POS data line is over the maximum number.
Please check the contents of a file.
POS 信息格式󳇮󲣄
球引脚位置信息行超出了最大行数。
󲣌确󲡹文件的内容。
Ea12583 POS information format error.
Ball POS Data cannot be read if there is no line of
default ball size previously.
Please check the contents of a file.
POS 信息格式󳇮󲣄
如果事先没有默󲡹球引脚大小行，不能󲣐入球引脚位置
信息数据。
󲣌确󲡹文件的内容。
Ea12584 POS information format error.
There is no diameter data in the line of default ball
size.
Or excessive data is added after diameter data.
Please check the contents of a file.
POS 信息格式󳇮󲣄
默󲡹球引脚大小行中没有直径数据，
或直径数据后存在多余的数据。
󲣌确󲡹文件的内容。
Ea12585 POS information format error.
One does not have some X or Y of the line of Ball POS data
at least.
Or excessive data is added after diameter data.
Please check the contents of a file.
POS 信息格式󳇮󲣄
球引脚位置信息行的 X,Y 中有一个不存在，
或直径数据后存在多余的数据。
󲣌确󲡹文件的内容。
Ea12586 POS information format error.
Standard ball POS data of the line of ball POS data is
over the maximum number.
Please check the contents of a file.
POS 信息格式󳇮󲣄
球引脚位置信息行的基准球位置超出了最大数。
󲣌确󲡹文件的内容。
Ea12587 POS information format error.
There is no effective reading data line.
Please check the contents of a file.
POS 信息格式󳇮󲣄
不存在有效的数据行。
󲣌确󲡹文件的内容。
Ea12589 DIFFERENCE FIND IN BACKUP FILES.
There is a difference by backup of a special setup or an option setup. below
Please check whether a setup is right.
%s
份差异确󲡹
特殊󲢓置/󲳞󳕎󲢓置的份在下列位置不一致。
󲣌确󲡹󲢓置是否正确。
%s
Ea12590 CLEAR MONITOR DATA
Do you want to Clear Monitor data?
清除󱎦控屏数据
清除󱎦控屏数据?
Ea12592 Failed to copy to clip board. 向剪󲨉板的制失󲧺了。
Ea12593 HALFWAY CONTINUE
Halfway Continue will be started.
[OK] Continue Auto Running
[Cancel] Abort
Stage:
中途󲨉装
在下列基板台上󲲰行中途󲨉装。
使用已󲣐入的中断信息󲲰行生󰋋，󲣌按[OK]󳈃。
中断󰋋，󲣌按[取消]󳈃。
基板台:
Ea12595 WAITING FOR A COMMAND FROM SVS-PRO.
It is in the state waiting for a command
from SVS-Pro.
SVS-Pro 的指令等待
等待来自 SVS-Pro 的指令状。
Ea12596 Now Pin Position is changing... 正在交󰀷󳅝...
Ea12597 If picking up component by the selected head,
the component may hit neighbor head.
So, After dumping the component,
follow action will be performed.
Nozzle FNC : Head move up until safety position.
Nozzle ANC : After putting back nozzle to station,
Head move up until safety
position.
Do you want to dump components of all head ?
[OK] Dump
[Cancel] Abort
用指定的 Head 吸附元件󰋋，可能与相󲶐的 Head 相互干。
了避免干，󲣌先当前吸附中的全部 Head 施元件
弃，然后󲲰行下列作。
FNC Head : 上升到互不干的高度上。
ANC Head : 上升到互不干的高度上。
在上升端相互干󰋋，
将相󲶐 Head 的吸嘴放回到吸嘴站。
[OK] 弃
[Cancel] 中断
Ea12598 Board condition un-adjustment.
A board is undetectable although
基板状不一致󳇮󲣄
=== %s ===