YAMAHA 报警资料.pdf - 第177页

Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 177 / 237 Copyright (C) 2009 Y amaha Motor Co.,Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…

100%1 / 237
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 176 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea14019 MIS - Board Log - Standby CT
Time to wait for upstream/downstream machine.
履 1 生 等待 CT(秒)
在󲢺基板󲨉装中，因上下流等待等原因而用的待机󰋋󳋉。
Ea14020 MIS - Board Log - MarkRec CT
Time to recognize marks(fiducial, badmark).
履 1 生 󰓜󲢅󲢛 CT(秒)
󲢺基板的基准󰓜󲢅或坏板󰓜󲢅等的󲢛所用的󰋋󳋉
Ea14021 MIS - Board Log - PickUp Error
Pickup error count including retry during the
board's production.
In the following case, it counts.
1. When it is detected that a part is not
present before recognition or mounting.
This check is performed only when
vacuum check is set to special check.
2. When it is detected that a parts is not picked
at the center of the nozzle at the
time of recognition.
3. When a part can not be detected
at the time of recognition.
4. When "Ea97" error occurred.
履 1 生 吸料󳇮󲣄次数
在󲢺基板的作中生吸料󳇮󲣄的次数。(包括重新行)
下列情况将󲡶数。
1．󰖕󰒺󱮨果󲢛前或󲨉装前没有吸附到元件󰋋。
󲢺󰖕󰒺，只有真空󰖕󰨠󲢓置特殊󰖕󰒺󰋋才行。
2．󲢛󱮨果没能将元件吸附到吸嘴中心󰋋。
3．󲢛󰋋，没有找到象物󰋋。
4．󳇮󲣄 "Ea97" 生󰋋。
Ea14022 MIS - Board Log - Parts Vision Error
Part recognition error count including
retry during the board's production.
履 1 生 元件󲢛󳇮󲣄次数
󲢺基板作中生元件󲢛󳇮󲣄的次数
(包括重新行)
Ea14023 MIS - Board Log - Mark Vision Error
Mark recognition error count during the board's
production. It counts, when the error of
Ea 51-55 or Ea 1394-1398 is displayed during
auto running.
履 1 生 󰓜󲢅󲢛󳇮󲣄次数
在󲢺基板的作中所生的󰓜󲢅󲢛󳇮󲣄的次数。
如 Ea51～55，Ea1394～1398 中的任何一个󳇮󲣄在自运
行中󰌓示󰋋，将󲡶数。
Ea14024 MIS - Board Log - Transfer Error
Board transfer error count during the board's
production. It counts, when the error of
Ea70, Ea71, Ea79, Ea80, Ea83, Ea84, or Ea85
is displayed during auto running.
履 1 生 送󳇮󲣄次数
在󲢺基板作中所生的送󳇮󲣄的次数。
如 Ea70、Ea71、Ea79、Ea80、Ea83、Ea84、Ea85 的任何一
个󳇮󲣄在自运行中󰌓示󰋋，将󲡶数。
Ea14025 MIS - Board Log - Other Error
Other error count during the board's production.
The number of times which errors other than
pickup error, part recognition error, mark
recognition error, and transfer error occurred.
履 1 生 其他󳇮󲣄次数
在󲢺基板的作中所生的其他󳇮󲣄的次数。
吸料󳇮󲣄、元件󲢛󳇮󲣄、󰓜󲢅󲢛󳇮󲣄、送󳇮󲣄等之
外的󳇮󲣄生次数。
Ea14026 MIS - Board Log - Stop Number
Error stop count during the board's production.
履 1 生 󳇮󲣄停止次数
在󲢺基板作中因󳇮󲣄而造成机器停止的次数
Ea14027 MIS - Board Log - Operator Call Time
Time from error to error clear during the
board's production.
履 1 生 󳇮󲣄停止󰋋󳋉(秒)
在󲢺基板的作中，从󳇮󲣄生到󳇮󲣄清除之󳋉停机
的󰋋󳋉合󲡶
Ea14028 MIS - Board Log - Recovery Time
Time from error clear to restart production
during the board's production.
履 1 生 󳇮󲣄恢󰋋󳋉(秒)
在󲢺基板的作中，从清除󳇮󲣄󰌓示到重新启机器之󳋉的
󰋋󳋉合󲡶
Ea14029 MIS - Board Log - NG Blocks
Number of blocks, which is skipped by badmark
detection on the Board.
履 1 生 坏板󰓜󲢅 NG 数
由󲢺基板的坏板󰓜󲢅而成 NG 的拼的个数
Ea14030 MIS - Board Log - Mounted Blocks
Number of blocks, which is mounted on the Board.
履 1 生 完成󲨉装的拼数
󲢺基板已󲨉装的拼数
Ea14031 MIS - Board Log - Coplanarity Error
Coplanarity check error count during the board's
production.
履 1 生 引脚󱲭起󳇮󲣄
在󲢺基板的作中，引脚󱲭起󳇮󲣄生的次数
Ea14040 MIS - Program Log - Program Name
Program name to produce the lot.
履 1 批 批名
生󲢺批基板的程序名
Ea14041 MIS - Program Log - Program Comment
Program comment to produce the lot.
履 1 批 批 ID
生󲢺批基板的程序的注
Ea14042 MIS - Program Log - Program Date
Last modified time of the program for the lot.
履 1 批 基板程序更新󰋋󳋉
在󲢺批基板生中，使用的基板程序被最后更改保存的日期。
Ea14043 MIS - Program Log - Start Date
Time to switch production.
履 1 批 生始󰋋󳋉
施生切󰀷的󰋋󳋉
Ea14044 MIS - Program Log - Setup Date
Time to start first production of the lot.
If it was not possible to start production
by e.g. data error, this value will not be
recorded even if the START button is pressed.
履 1 批 生准󱮨束󰋋󳋉
完成生准，能始自运行的最初󰋋󳋉
( 如因程序󳇮󲣄等原因使运行无法始󰋋，即使
按下 START 󳈃， 󲢺󰋋󳋉也不会成生准󱮨束
󰋋󳋉。)
Ea14045 MIS - Program Log - Finish Date
Time to switch the next program.
Or time to turn off the machine.
履 1 批 生完成󰋋󳋉
切󰀷到下一个基板生的󰋋󳋉。
或者，切断󱈊源的󰋋󳋉。
Ea14046 MIS - Program Log - Board Count Max
Board count, which was specified for the lot.
The latest value is recorded
if the Board count is modified during production.
履 1 批 󳕙定枚数(枚)
󲢺批基板所指定的󳕙定生枚数
( 如在生󲲜程中更改了数，󲢅最󱮝的数。)
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 177 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea14047 MIS - Program Log - Produced Boards
Number of boards, which were completed.
It is updated when Board carrying out is completed.
履 1 批 󳌚生枚数(枚)
生󱮨束󰋋，󳌚完成生的基板枚数。
󳌚生枚数在基板出󱮨束󰋋被更新。
(没有完成生的基板不被󲡶数。)
Ea14048 MIS - Program Log - Mount CT Max
The longest mounting time of a Board for the lot.
履 1 批 󲨉装 CT/枚 MAX
在󲢺批基板中，󲨉装󰋋󳋉最󳉔的基板的󲨉装󰋋󳋉
Ea14049 MIS - Program Log - Mount CT Min
The shortest mounting time of a Board for the lot.
履 1 批 󲨉装 CT/枚 MIN
在󲢺批基板中，󲨉装󰋋󳋉最短的基板󲨉装󰋋󳋉
Ea14050 MIS - Program Log - Mount CT Ave
The average mounting time for the lot.
履 1 批 󲨉装 CT/枚 AVE
在󲢺批基板中，平均󲨉装 1 枚基板的所需󰋋󳋉
Ea14051 MIS - Program Log - Transfer CT Max
The longest transfer time of a Board for the lot.
履 1 批 送 CT/枚 MAX
在󲢺批基板中，送󰋋󳋉最󳉔的基板送󰋋󳋉
Ea14052 MIS - Program Log - Transfer CT Min
The shortest transfer time of a Board for the lot.
履 1 批 送 CT/枚 MIN
在󲢺批基板中，送󰋋󳋉最短的基板送󰋋󳋉
Ea14053 MIS - Program Log - Transfer CT Ave
The average transfer time for the lot.
履 1 批 送 CT/枚 AVE
在󲢺批基板中，1 枚基板的平均送󰋋󳋉
Ea14054 MIS - Program Log - Standby CT Max
The longest waiting time of a Board for the lot.
履 1 批 待机 CT/枚 MAX
在󲢺批基板中，待机󰋋󳋉最󳉔基板所待机的󰋋󳋉
Ea14055 MIS - Program Log - Standby CT Min
The shortest waiting time of a Board for the lot.
履 1 批 等待 CT/枚 MIN
在󲢺批基板中，待机󰋋󳋉最短基板所待机的󰋋󳋉
Ea14056 MIS - Program Log - Standby CT Ave
The average waiting time for the lot.
履 1 批 待机 CT/枚 AVE
在󲢺批基板中 1 枚基板的平均待机󰋋󳋉
Ea14057 MIS - Program Log - MarkRec CT Max
The longest mark recognition time of a Board for
the lot.
履 1 批 󰓜󲢅󲢛 CT/枚 MAX
在󲢺批基板中，󰓜󲢅󲢛󰋋󳋉最󳉔基板󰓜󲢅󲢛󰋋󳋉
Ea14058 MIS - Program Log - MarkRec CT Min
The shortest mark recognition time of a Board for
the lot.
履 1 批 󰓜󲢅󲢛 CT/枚 MIN
在󲢺批基板中，󰓜󲢅󲢛󰋋󳋉最短基板的󰓜󲢅󲢛󰋋󳋉
Ea14059 MIS - Program Log - MarkRec CT Ave
The average mark recognition time for the lot.
履 1 批量 󰓜󲢅󲢛 CT/枚 AVE
在󲢺批基板中，平均 1 枚基板的󰓜󲢅󲢛󰋋󳋉
Ea14060 MIS - Program Log - PickUp Error
Pickup error count including retry during the
lot's production.
In the following case, it counts.
1. When it is detected that a part is not
present before recognition or mounting.
This check is performed only when
vacuum check is set to special check.
2. When it is detected that a part is not picked
at the center of the nozzle at the
time of recognition.
3. When a part can not be detected
at the time of recognition.
4. When "Ea97" error occurred.
履 1 批 吸料出󳇮次数
在󲢺批基板作中，生吸料󳇮󲣄的次数(包括重新行)。
以下情况将󲡶数。
1. 󲢛前或󲨉装前，已判断出不能吸附元件󰋋。
󲢺󰖕󰒺，只限于吸附·󲨉装真空感器󲢓置特殊󰖕󰒺的󰋋才󲲰行。
2．󲢛󱮨果没能将元件吸附至吸嘴中心󰋋。
3．󲢛󰋋，没找到象物󰋋。
4．生 "Ea97"󳇮󲣄󰋋。
Ea14061 MIS - Program Log - Parts Vision Error
Component recognition error count including
retry during the lot's production.
履 1 批 元件󲢛出󳇮次数
在󲢺批基板作中，生元件󲢛󳇮󲣄的次数
(包括重新行)
Ea14062 MIS - Program Log - Mark Vision Error
Mark recognition error count during the lot's
production. It counts, when the error of
Ea 51-55 or Ea 1394-1398 is displayed during
auto running.
履 1 批 󰓜󲢅󲢛出󳇮次数
在󲢺批基板作中，生󰓜󲢅󲢛󳇮󲣄的次数。
如 Ea51～55、Ea1394～1398 中任何一个󳇮󲣄在自运行
中󰌓示󰋋，将󲡶数。
Ea14063 MIS - Program Log - Transfer Error
Board transfer error count during the lot's
production. It counts, when the error of
Ea70, Ea71, Ea79, Ea80, Ea83, Ea84, or Ea85
is displayed during auto running.
履 1 批 送出󳇮次数
在󲢺批基板作中，生送󳇮󲣄的次数。
如 Ea70、Ea71、Ea79、Ea80、Ea83、Ea84、Ea85 中的任何
一个󳇮󲣄在自运行中󰌓示󰋋，将󲡶数。
Ea14064 MIS - Program Log - Other Error
Other error count during the lot's production.
The number of times which errors other than
pickup error, part recognition error,
mark recognition error and transfer error
occurred.
履 1 批 其他出󳇮次数
在󲢺批基板作中，生其他󳇮󲣄的次数。
吸料󳇮󲣄、元件󲢛󳇮󲣄、󰓜󲢅󲢛󳇮󲣄、送󳇮󲣄以外
的󳇮󲣄生的次数。
Ea14065 MIS - Program Log - Operator Call Time
Time from error to error clear during the lot's
production.
履 1 批 出󳇮停止󰋋󳋉(秒)
在󲢺批基板作中，从󳇮󲣄生到󳇮󲣄清除之󳋉停机的󰋋󳋉的合󲡶
Ea14066 MIS - Program Log - Recovery Time
Time from error clear to restart production
during the lot's production.
履 1 批 出󳇮修󰋋󳋉(秒)
在󲢺批基板作中，从清除󳇮󲣄󰌓示到机器重新启之󳋉的󰋋󳋉的合󲡶
Ea14067 MIS - Program Log - NG Blocks
Total number of blocks, which is skipped by
badmark detection in the lot.
履 1 批 坏板󰓜󲢅 NG 数
在󲢺批基板中，坏板󰓜󲢅 NG 的拼个数
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 178 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea14068 MIS - Program Log - Mounted Blocks
Total number of blocks, which is mounted in
the lot.
履 1 批 完成󲨉装的拼数
在󲢺批基板中，已完成󲨉装的全部拼数
Ea14069 MIS - Program Log - Upstream Standby Time
Total time waiting for upstream machine
during the lot's production (starved).
履 1 批 上位待机󰋋󳋉(秒)
在󲢺批基板生中，
因上位机而造成待机状的󰋋󳋉合󲡶
Ea14070 MIS - Program Log - Downstream Standby Time
Total time waiting for the downstream machine
during the lot's production (blocked).
In case that the machine has a Board on the exit,
waiting the downstream machine, but has no Board
to mount due to the upstream machine, it will
be counted as waiting time for the upstream
machine.
In case that the machine has a Board on the exit
and another Board on the work position, it will
be counted as waiting time for the downstream
machine.
履 l 批 下位待机󰋋󳋉(秒)
在󲢺批基板生中，因下位机而造成待机状的󰋋󳋉合󲡶。
出口送上的基板，尽管因下位机而于出板待机状，
只要󲨉装位置没有基板，可以接受从上位机入的基板󲲰行
󲨉装󰋋，就上位待机。如出口送和󲨉装位置上有基板，
下位待机。
Ea14071 MIS - Program Log - Working Ratio
Ratio(%) =
(Total mounting time + Total mark recognition time
+ Total transfer time) / (Production finish time
- Production start time - Total wait time) * 100
履 1 批 运󲱁率(%)
运󲱁率是指，󲢺批基板中，󲨉片机󳌚运行󰋋󳋉与可运行󰋋󳋉的比率。
运󲱁率(%)=(累󲡶󲨉装󰋋󳋉+累󱛄󰓜󲢅󲢛󰋋󳋉+累󱛄送󰋋󳋉) / (生完成󰋋󳋉-
生准󱮨束󰋋󳋉-累󲡶待机󰋋󳋉)*100
Ea14072 MIS - Program Log - Mount Points
Number of components to be mounted on a Board
for the lot.
履 1 批 󲨉装数
用󲢺批基板的程序完成󲨉装的元件数。
切󰀷生基板󰋋󲲰行合󲡶。
Ea14073 MIS - Program Log - Parts Consumption
Total number of used components for the lot's
production. The component count for the e.g.
test picking is excluded.
When parts are picked normally, it is counted.
履 1 批 元件消耗数
󲢺批基板作中所消耗的元件数量。
󲡶算自运行中所消耗的元件数，因󰨠󲢪吸附等所消耗的
元件不被󲡶数。
正常吸附元件󰋋，才󲡶数。
Ea14074 MIS - Program Log - Coplanarity Error
Coplanarity check error count during the lot's
production.
履 1 批 引脚󱲭起出󳇮
在󲢺批基板作中，生引脚󱲭起󳇮󲣄的次数
Ea14080 Unit Log - Head - Head
Head numbering.
履 2 󲨉装 󲨉装
󰌓示󲢓持有的󲨉装个数。
Ea14081 Unit Log - Head - Data
Time to start recording the head down action.
履 2 󲨉装 󲡶󰨠始󰋋󳋉
󲨉装下降的󲡶󰨠始󰋋󳋉
Ea14082 Unit Log - Head - Down Counter
Number of head down actions.
履 2 󲨉装 下降次数
󲨉装已下降的次数
Ea14083 Unit Log - Head - Down Error Counter
Number of errors concerning the head down action.
履 2 󲨉装 下降出󳇮次数
生󲨉装未到达下降端等󳇮󲣄的次数
Ea14084 Unit Log - Head - Error per cent(%)
The ratio of the head down error to the head down count.
履 2 󲨉装 出󳇮率(%)
󲨉装的下降󳇮󲣄次数/下降次数的比率
Ea14085 Unit Log - Head - Data
Time to start recording the head blow.
履 2 󲨉装 󲡶󰨠始󰋋󳋉
󲨉装排气的󲡶󰨠始󰋋󳋉
Ea14086 Unit Log - Head - Blow Counter
Number of head blows.
履 2 󲨉装 排气次数
󲨉装排气的次数
Ea14087 Unit Log - Head - Blow Error Counter
Number of errors concerning the head blow.
履 2 󲨉装 排气出󳇮次数
生󲨉装排气󳇮󲣄的次数
Ea14088 Unit Log - Head - Error per cent(%)
The ratio of the head blow error to the head blow count.
履 2 󲨉装 出󳇮率(%)
󲨉装的 排气󳇮󲣄次数/排气次数 的比率
Ea14089 Unit Log - Head - Data
Time to start recording the head suction.
履 2 󲨉装 󲡶󰨠始󰋋󳋉
󲨉装吸附的󲡶󰨠始󰋋󳋉
Ea14090 Unit Log - Head - Pick Counter
Number of head suctions.
履 2 󲨉装 吸料次数
󲨉装吸料的次数
Ea14091 Unit Log - Head - Pick Error Counter
Number of errors concerning the head suction.
履 2 󲨉装 吸料出󳇮次数
生󲨉装吸料󳇮󲣄的次数
Ea14092 Unit Log - Head - Error per cent(%)
The ratio of the head pick error to the head pick count.
履 2 󲨉装 出󳇮率(%)
󲨉装的 吸料󳇮󲣄次数/吸料次数 的比率
Ea14093 Unit Log - Head - Data
Time to start recording the head FNC action.
履 2 󲨉装 󲡶󰨠始󰋋󳋉
󲡶󰨠󲨉装 FNC 交󰀷吸嘴的始󰋋󳋉
Ea14094 Unit Log - Head - FNC Counter
Number of head FNC actions.
履 2 󲨉装 FNC 交󰀷次数
󲨉装 FNC 交󰀷吸嘴的次数
Ea14095 Unit Log - Head - FNC Error Counter
Number of errors concerning the FNC action.
履 2 󲨉装 FNC 交󰀷出󳇮次数
󲨉装 FNC 交󰀷吸嘴󰋋所生的󳇮󲣄次数
Ea14096 Unit Log - Head - Error per cent(%)
The ratio of the head FNC error to the head FNC count.
履 2 󲨉装 出󳇮率(%)
󲨉装的 FNC 交󰀷󳇮󲣄次数/FNC 交󰀷次数 的比率
Ea14097 Unit Log - Head - Data
Time to start recording the head ANC action.
履 2 󲨉装 󲡶󰨠始󰋋󳋉
󲡶󰨠󲨉装 ANC 交󰀷吸嘴的始󰋋󳋉
Ea14098 Unit Log - Head - ANC Counter
Number of head ANC actions.
履 2 󲨉装 ANC 交󰀷次数
󲨉装 ANC 交󰀷吸嘴的次数