YAMAHA 报警资料.pdf - 第37页
Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 37 / 237 Copyright (C) 2009 Y amaha Motor Co., Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 36 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
In Static Components, the component data of same name
are dialed with the alternative component.
Each alternative components need to same the above
condition.
如固定元件内存在同名元件，会被是替代元件。
互替代元件的元件，上述置必一致。
Ea00734 Alternative component error
"Required Nozzle" is not the same as the original one.
In Static Components,the component data of same name
are dialed with the alternative component.
Each alternative components need to same the above
condition.
替代元件
"使用吸嘴"不一致。
如固定元件内存在同名元件，会被是替代元件。
互替代元件的元件，上述置必一致。
Ea00735 Alternative component error
"CountOutStop" is not the same as the original one.
In Static Components,the component data of same name
are dialed with the alternative component.
Each alternative components need to same the above
condition.
替代元件
"数束停止"的置不一致。
如固定元件内存在同名元件，会被是替代元件。
互替代元件的元件，上述置必一致。
Ea00736 Alternative component error
"UpdateGroupNo" must be all positive or all 0 in loop.
In Static Components,the component data of same name
are dialed with the alternative component.
Each alternative components need to same the above
condition.
替代元件
"更新号"在循中全部正数或 0。
如固定元件内存在同名元件，会被是替代元件。
互替代元件的元件，上述置必一致。
Ea00737 Alternative component error
Mount table is not the same as the original one.
替代元件
替代元件的置跨越了工作台。
替代元件必在同一工作台中。
Ea00738 Alternative component error
You cannot use alternative function for tray.
替代元件
不可使用托元件的替代元件。
Ea00739 Alternative component error
Component Names are different from the original ones.
替代元件
"元件名称"不一致
Ea00740 Failed to open a fixed component matching work file. 固定元件的匹配作文件的打失了。
Ea00741 Failed to read a fixed component matching work file. 固定元件的匹配作文件的入失了。
Ea00742 Failed to write a fixed component matching work file. 固定元件的匹配作文件的写入失了。
Ea00750 Failed to open a fixed component work file. 固定元件的作文件的打失了。
Ea00751 Failed to read a fixed component work file. 固定元件的作文件的入失了。
Ea00752 Failed to write a fixed component work file. 固定元件的作文件的写入失了。
Ea00760 You cannot multiply component so many times. 元件分割次数超出上限。
Ea00761 Mount data specifies too large a component number. 装数据中指定的元件号大。
Ea00762 Selected Board is not registered
in selected line.
指定的生中，
没有登指定的基板程序。
Ea00763 Too many points, local and 4-point fiducial data. 点、局部、4 点基准数据数多。
Ea00764 Too much mark data. 数据数多。
Ea00765 Illegal mark number is specified in fiducial data. 基准数据中所指定的号异常。
Ea00766 Have you saved component information?
[ESC] key to abort fixed comp.match
Any other key to exec fixed comp.match
保存了元件信息?
[ESC] : 中止固定元件匹配
其 他 : 行固定元件匹配
Ea00767 Have you saved component information?
If not, the data you have changed are lost.
For ex., MULTIPLY COMPONET or FIXED COMPONENT MATCH,
these results will be lost.
[ESC] key to abort auto distribution
Any other key to exec auto distribution
保存了元件信息?
在未保存的情况下行指令，元件分割或固定
元件匹配等的果将失去。
[ESC] : 中止生程序自分配
其 他 : 行生程序自分配
Ea00770 Failed to open nozzle combination information.
The setting of NZL. CONDITION is EDITING.
Edit the nozzle condition in NOZZLE SETTING.
Machine
吸嘴置文件的打失了。
吸嘴置条件手。
在吸嘴置画面置吸嘴。
机器名称
Ea00771 Failed to read nozzle combination information.
Machine
吸嘴置文件的入失了。
机器名称
Ea00772 Failed to write nozzle combination information.
Machine
吸嘴置文件的写入失了。
机器名称
Ea00773 Failed to open non stop distribution information.
Machine
取消替代展的置文件的打失了。
机器名称
Ea00774 Failed to read non stop distribution information.
Machine
取消替代展的置文件的入失了。
机器名称
Ea00775 Failed to write non stop distribution information.
Machine
取消替代展的置文件的写入失了。
机器名称
Ea00780 Failed to read machine configuration.
Machine
机器构成文件的入失了。
机器名称
Ea00781 Failed to read machine data.
Machine
机器数据的入失了。
机器名称
Ea00782 Failed to read machine specification. 机器格的入失了。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 37 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Machine 机器名称
Ea00789 CAUTION:
There are Board files with the same name on other machines
in the line. If you continue data generation
the Board Info, Mark Info and Block Offset Info.
will be copied from the first machine in the line.
Press the [ENTER] key to execute.
Press the [ESC] key to cancel this operation.
警告:
多个机器中存在相同名称的基板程序。
如各个机器中的基板信息、信息、拼制信息存在
不同之，将一更改生最前端机器的数据。
如各个机器中的上述数据中没有不同之，或者可以更改，
按[ENTER]。中止程序生成，按[ESC]。
Ea00790 Now copying Board data to work data (DUMMY_GENERATOR). 正在将基板程序制至操作用程序中(DUMMY_GENERATOR)。
Ea00792 Generating a nozzle file. 正在生成固定吸嘴文件。
Ea00794 Accessing a disk.
Wait a moment.
正在磁。
稍候。
Ea00795 Displaying nozzle combination
[ESC] : No display
ANY OTHER KEY: Display nozzle
示吸嘴合?
[ESC] : 藏
其 他 : 示
Ea00796 Failed to make work data (DUMMY_GENERATOR).
Mark data of Board Information does not match
between the machines.
操作用程序(DUMMY_GENERATOR)的生成失了。
在多个机器，基板信息内的数据不同。
Ea00797 No Board name and line name have been chosen.
1. If both of them are not chosen, it is not
possible to make data.
If you want to make data, choose them again.
2. If you want to choose the line, you must
choose Board data first.
3. If you want to choose the Fixed Board, you must
choose Board data first.
没有象基板名称或者象生。
1. 如不象基板名称或象生，将不能生成程序。
如要生成程序，象基板名称、象生。
2. 象生，先象基板。
3. 固定基板，先象基板。
Ea00798 No machine with Slide Feeder Bar.
Because there is no machine with Slide Feeder Bar,
NON STOP CONDITION is not available.
LIST TO ABORT NON-STOP is also not available.
不存在可使用不停机装置的机器。
因不存在可以使用不停机装置的机器，所以不能行替代
展。
也不能使用取消替代展列表。
Ea00799 Failed during COMP.GLOBAL TO TEXT.
If the COMP.GLOBAL TEXT DATA is opened in another
window, close the file to enable to create the file.
Or if no space is left in hard disk, it causes
this error.
元件状况的文件化失了。
如其他窗口中正打着元件状况文件，先将其。
也有可能是因硬容量不足所致。
Ea00801 QUICK STOP ACTIVE: "NJ06 FRONT-RIGHT COVER"
QUICK STOP FUNCTION is now active.
To continue, please ensure that the front
cover is correctly closed.
[NJ06 前机盖 右]，急停机功能正于有效状。
看机盖的状，采取相措施。
Ea00802 QUICK STOP ACTIVE: "NJ07 REAR-RIGHT COVER"
QUICK STOP FUNCTION is now active.
To continue, please ensure that the front
cover is closed correctly.
[NJ07 后机盖 右]，急停机功能正于有效状。
看机盖的状，采取相措施。
Ea00803 QUICK STOP ACTIVE: "FRONT-LEFT FEEDER SENSOR"
QUICK STOP FUNCTION is now active.
To continue, please ensure that the front-left
feeders are inserted correctly.
If the feeder exchange system is used, also ensure
that the system is fixed properly.
[前(左)送料器起出感器]
急停机功能正于有效状。
机盖的状，采取相措施。
Ea00804 QUICK STOP ACTIVE: "NM06 REAR-LEFT COVER"
QUICK STOP FUNCTION is now active.
To continue, please ensure that the rear
cover is correctly closed.
[NM06 后机盖 左]，急停机功能正于有效状。
看机盖的状，采取相措施。
Ea00805 QUICK STOP ACTIVE: "NM07 FRONT-LEFT COVER"
QUICK STOP FUNCTION is now active.
To continue, please ensure that the rear
cover is correctly closed.
[NM07 前机盖 左]，急停机功能正于有效状。
看机盖的状，采取相措施。
Ea00806 QUICK STOP ACTIVE: "AIR PRESSURE"
QUICK STOP FUNCTION is now active.
To continue, please check the air supply pressure.
[气下降出]，急停机功能正于有效状。
看供气，采取相措施。
Ea00807 QUICK STOP ACTIVE: "REAR-RIGHT FEEDER SENSOR"
QUICK STOP FUNCTION is now active.
To continue, please ensure that the rear-right
feeders are inserted correctly.
If the feeder exchange system is used, also ensure
that the system is fixed properly.
[后(右)送料器起出感器]
急停机功能正于有效状。
看送料器的安装状，采取相措施。
如使用一次性料，料的固定状也确。
Ea00808 QUICK STOP ACTIVE: "BOARD TRANSFER HOOK NG SENSOR"
QUICK STOP FUNCTION is now active.
Some of following sensor is OFF.
[N1022] [N1023] [N1024]
[送]，急停机功能正于有效状。
下列感器中有一个 OFF 。
[N1022] [N1023] [N1024]
采取相措施。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 38 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Remove the Board and check the conveyor condition.
Ea00809 QUICK STOP ACTIVE: "Front area sensor"
QUICK STOP FUNCTION is now active.
Remove the cause of QUICK STOP.
[前区域感器]，急停机功能正于有效状。
采取相措施。
Ea00810 QUICK STOP ACTIVE: "REAR area sensor"
QUICK STOP FUNCTION is now active.
Remove the cause of QUICK STOP.
[后区域感器]，急停机功能正于有效状。
采取相措施。
Ea00811 QUICK STOP ACTIVE:
"FRONT-FEEDER PLATE SENSOR 1"
QUICK STOP FUNCTION is now active.
To continue, please ensure that the front
feeder plate is inserted correctly.
一次性安装送料器架用的
[前送料器架起感器 1]
，急停机功能正于有效状。
看送料器架的安装状，采取相措施。
Ea00812 QUICK STOP ACTIVE:
"REAR-FEEDER PLATE SENSOR 1"
QUICK STOP FUNCTION is now active.
To continue, please ensure that the rear
feeder plate is inserted correctly.
一次性安装送料器架用的
[后送料器架起感器 1]
，急停机功能正于有效状。
看送料器架的安装状，采取相措施。
Ea00813 QUICK STOP ACTIVE: "Buffer Conveyor Interlock"
QUICK STOP FUNCTION is now active.
[冲送装置的]，
急停机功能正于有效状。
Ea00814 QUICK STOP ACTIVE: "FRONT-RIGHT FEEDER SENSOR"
QUICK STOP FUNCTION is now active.
To continue, please ensure that the front-right
feeders are inserted correctly.
If the feeder exchange system is used, also ensure
that the system is fixed properly.
[前(右)送料器起出感器]
急停机功能正于有效状。
看送料器的安装状，采取相措施。
如使用一次性料，料的固定状也确。
Ea00815 QUICK STOP ACTIVE: "REAR-LEFT FEEDER SENSOR"
QUICK STOP FUNCTION is now active.
To continue, please ensure that the rear-left
feeders are inserted correctly.
If the feeder exchange system is used, also ensure
that the system is fixed properly.
[后(左)送料器起出感器]
急停机功能正于有效状。
看送料器的安装状，采取相措施。
如使用一次性料，料的固定状也确。
Ea00816 QUICK STOP ACTIVE:
"FRONT-FEEDER PLATE SENSOR 2"
QUICK STOP FUNCTION is now active.
To continue, please ensure that the front
feeder plate is inserted correctly.
一次性安装送料器架用的
[前送料器架起感器 2]，
急停机功能正于有效状。
看送料器架的安装状，采取相措施。
Ea00817 QUICK STOP ACTIVE:
"REAR-FEEDER PLATE SENSOR 2"
QUICK STOP FUNCTION is now active.
To continue, please ensure that the rear
feeder plate is inserted correctly.
一次性安装送料器架用的
[后送料器起感器 2]，
急停机功能正于有效状。
看送料器架的安装状，采取相措施。
Ea00818 QUICK STOP ACTIVE:
"SAFETY SENSOR FOR WIDTH AXIS"
QUICK STOP FUNCTION is now active.
[基板度安全确感器]
，急停机功能正于有效状。
采取相措施。
Ea00819 QUICK STOP ACTIVE:
"ALARM: COOLING FAN X1-AXIS IS NOT WORKING"
QUICK STOP FUNCTION is now active.
Please check the status.
因[X1 达冷却扇停止]，急停机功能正于有效状。
确 X1 达冷却扇的状。
Ea00820 CLEAN-FAN INTERLOCK
Clean-Fan in the machine is not suitable for
production.
You cannot run the machine under this condition.
Please check Clean-Fan.
清扇异常
清扇不正常。
直至其正常止无法运行。
确清扇。
Ea00825 CLEANER BLOWER MOTOR OVERHEATED OR INVERTER FAULT LOAD
The over heat of the blower motor of cleaner unit or
the fault load of inverter was detected.
Possible causes:
(1) Piping of cleaner hose is choked up.
(2) The blower motor may have broken.
(3) The inverter may have broken.
(4) The temperature of blower motor rose by cleaning
continuation execution.
清装置鼓达温度异常或器超荷
已出清装置鼓达温度异常或器超荷。
可能由以下原因造成。
(1) 清装置管道堵塞
(2) 鼓达坏
(3) 器坏
(4) 因清装置持运行而致鼓达的温度上升
Ea00826 INSPECTION CAMERA LIGHT OVERHEATED
Temperature of inspection camera light is too high.
You cannot use inspection camera under this condition.
相机照明温度异常
相机的照明温度不正常。
温度正常后，才能使用相机。
Ea00827 HEAD 1 HEATER TEMPERATURE OVERHEATED
Unusual temperature of the head heater or a
feedback error was detected.
You cannot run the machine under this condition.
Please check Heater condition.
Possible causes:
Temperature sensor broken.
点胶 1 加器高温异常
已出点胶 1 加器高温或反。
排除温度异常后，重新启机器后才能运行。
可能由以下原因造成。
·温度感器的断
·加器的断
·温度感器和加器的分离