YAMAHA 报警资料.pdf - 第57页

Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 57 / 237 Copyright (C) 2009 Y amaha Motor Co., Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…

100%1 / 237
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 56 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Component Name
的固定元件并不存在。
元件数据 号 名称
Ea01725 Fixed component information error
Feeder Type are different between Board data and
fixed component.
固定元件信息󳇮󲣄
基板程序的"使用送料器"与指定固定元件信息的
"使用送料器"不一致。
Ea01731 Alternative component error
Loop is not perfect.
替代元件󳇮󲣄
󲢓置未构成循󱂄。
Ea01760 FIXED COMPONENT BIT ERROR
Failed to read fixed component bit information.
Machine
固定元件 Bit 󳇮󲣄
固定元件 Bit 文件的󲣐入失󲧺了。
机器名称
Ea01761 FIXED COMPONENT BIT ERROR
Failed to write fixed component bit information.
Machine
固定元件 Bit 󳇮󲣄
固定元件 Bit 文件的写入失󲧺了。
机器名称
Ea01770 FIXED COMPONENT MASK ERROR
Failed to read fixed component mask information.
固定元件屏蔽󳇮󲣄
固定元件屏蔽文件的󲣐入失󲧺了。
Ea01771 FIXED COMPONENT MASK ERROR
Failed to write fixed component mask information.
固定元件屏蔽󳇮󲣄
固定元件屏蔽文件的写入失󲧺了。
Ea01780
Do cycletime estimation?
[ESC] : No
Others: Yes
󱮼󱯂󲲰行 TACT 󰋋󳋉的推󰨠?
[ESC] : 不󲲰行 TACT 󰋋󳋉推󰨠
其他 : 󲲰行 TACT 󰋋󳋉推󰨠
Ea01781
Do line data distribution?
[ESC] : No
Others: Yes
󱮼󱯂重新分配生󱮔程序?
[ESC] : 不重新分配生󱮔程序
其他 : 重新分配生󱮔程序
Ea01782 Auto Distribution Error
These parts which cannot set feeder set position are existed.
Note:
-Please check a setup of fixed part and board.
-Please use part group number only for required of a nozzle interference check.
-Please change the line distribution method of the optimization setup.
-Please fix parts with many condition of feeder set position, such as special feeder
parts.
自分配󳇮󲣄
存在无法确定送料器安装位置的元件。
注意∶
- 󲣌确󲡹固定元件、固定基板的󲢓置。
- 󲣌通󲲜吸嘴干󰖕󰒺，只必需的元件使用元件󱮙号󱓖。
- 󲣌更改最化󲢓置的生󱮔分配方法。
- 󲣌固定送料器位置受限制多的元件，如特殊送料器元件等。
Ea01783 MOUNT INFORMATION ERROR
When mount information is not set
the Board can not be optimized.
󲨉装信息󳇮󲣄
无󲨉装信息的基板程序不能󲲰行最化。
Ea01790 Alternative component error
"Alignment Type" settings for all components
in an Alternative Component loop must be the same.
For Static Components, components with the same name
are treated as Alternative Components.
替代元件󳇮󲣄
"校正󱥐型"不一致。
如固定元件内存在同名的元件，会󲡹是替代元件。
替代元件之󳋉，上述󲢓置必󳕐一致。
Ea01791 Alternative component error
"Mount Action" setting for all Components
in an Alternative Components loop must be same.
For Static Components, components with the same name
are treated as Alternative Parts.
替代元件󳇮󲣄
"󲨉装作"不一致。
如固定元件内存在同名的元件，会󲡹是替代元件。
替代元件之󳋉，上述󲢓置必󳕐一致。
Ea01792 ALTERNATIVE COMPONENT ERROR
"Pick Angle" is not same as original one.
Start component number of loop is
Comp.No. Name
替代元件󳇮󲣄
“吸料角度”不一致。
󲲰行替代循󱂄󰒺找的始元件号󱓖
元件数据 号 名称
Ea01793 Alternative component error.
"Part Group Number" is not same as original one.
Start component number of loop is
Component Name
替代元件󳇮󲣄
"元件󱮙号󱓖"不一致。
󲲰行替代循󱂄󰒺找的始元件号󱓖
元件数据 号 名称
Ea01799 "MountInfo.Mode" is not set to "V2.0 Compatible".
This Machine can not use the DATA_GENERATOR.
因"󲨉装信息模式"没有󲢓置"V2.0 兼容模式"，所以不能生成程序。
Ea01801 LINE START ERROR
Cannot start all machines by communication.
生󱮔启󳇮󲣄
存在不能用通信方式启的机器。
Ea01802 ERROR CLEAR ERROR
Cannot clear error all machines by communication.
󳇮󲣄清除󳇮󲣄
存在不能用通信方式清除󳇮󲣄的机器。
Ea01803 RESET ERROR
Cannot reset all machines by communication.
机器位󳇮󲣄
存在不能用通信方式位的机器。
Ea01804 SWITCH BOARD ERROR
Cannot switch Board in all machines by communication.
生基板切󰀷󳇮󲣄
存在不能用通信方式切󰀷生基板的机器。
Ea01805 WARMUP ERROR
Cannot start or stop warmup running of all machines
by communication.
暖机运行󳇮󲣄
存在不能用通信方式始或停止
暖机运行的机器。
Ea01806 ORIGIN ERROR
Cannot search origin of all machines by communication.
返回原点󳇮󲣄
存在不能用通信方式启返回原点的机器。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 57 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea01861 Now going to delete Line production data file.
Target file:
[ESC] key to cancel
Other key to continue
除生󱮔履文件。
象文件名称:
[ESC] : 中止
其他 : 行
Ea01862 Now going to print Line production data file.
Target file:
[ESC] key to cancel
Other key to continue
印刷生󱮔履文件。
象文件名:
[ESC] : 中止
其他 : 行
Ea01863 Now going to read Line production data file.
WARNING: If continue, current Line production
data may be lost.
Target file:
[ESC] key to cancel
Other key to continue
󲣐入生󱮔履文件。
警告: 正在󲲰行生󱮔控制󰋋，
可能会造成生󱮔的履数据失。
󲣐入文件名称:
[ESC] : 中止
其他 : 行
Ea01864 Now going to save Line production data file.
Target file:
[ESC] key to cancel
Other key to continue
保存生󱮔履文件。
保存文件名称:
[ESC] : 中止
其他 : 行
Ea01865 Now going to change Line production data file
name only.
Original name:
New name :
[ESC] key to cancel
Other key to continue
更改生󱮔履文件名称。
更改履文件名称。
更改前的文件名称:
更改后的文件名称:
[ESC] : 中止
其他 : 行
Ea01866 Now going to initialize Line production data.
Only data will be initialized.
Target file:
[ESC] key to cancel
Other key to continue
生󱮔履数据󲲰行初始化。
初始化内存上的履数据。
象文件名称:
[ESC] : 中止
其他 : 行
Ea01900 Could not receive start of code(@). 未能接收到通信数据的始代󱓖(@)。
Ea01901 Could not receive end of code. 未能接收到通信数据的󱮨束代󱓖(@)。
Ea01902 The machine received invalid data. 通信的象接收到󲚙定之外的数据。
Ea01903 The machine can not receive this command.
The following may be the cause:
- The machine is not in RESET condition.
Remove the cause and resume the operation.
无法行指令。
可能由下列原因造成。
- 机器不在位状。
󲣌在󰒺明原因解决后，重新行。
Ea01904 The machine is running now.
When the machine is running, the machine can
not receive this command.
机器正在自运行中。
机器在自运行󰋋，无法行󲢺指令。
Ea01905 No Board is selected for production. 没有󲳞基板。
Ea01906 Could not find Board data. 没有找到基板程序。
Ea01907 Invalid Board data.
During communication, this program
has lost one or more character(s).
基板程序󳇮󲣄。
可能在通信中程序已失。
Ea01908 Could not delete Board data. 除基板程序失󲧺了。
Ea01909 Could not communicate. 因某󱚢原因无法通信。
Ea01910 The machine is in EMERGENCY STOP.
Check that conditions are safe
and press the READY button to
re-enable the machine.
机器在󱧼急停机状中。
󲣌在确󲡹安全后，解除󱧼急停机状。
Ea01911 The machine is INTERLOCK.
Remove the cause of INTERLOCK.
机器呈󱴩󳇖状。
󲣌󰒺明原因并解决。
Ea01912 ORIGIN SEARCH has not been completed.
Please start or complete Origin Search.
机器未行返回原点。
󲣌行返回原点的作。
Ea02201 BOARD TRANSFER ERROR
Unexpected Board is on the conveyor.
On the auto-running or the transfer,
two boards are detected at the same time.
A) At the entrance and the waiting position.
B) At the waiting position and the mounting position.
C) At the mounting position and the exit.
D) At the mounting position and the exit halfway position.
Error Detail No.
基板送󳇮󲣄
送上存在多于󲚙定数量的基板。
󲣌取下多余的基板。
原因:
自运行始󰋋，或者在送󰋋，
在 入口 和 待机位置 同󰋋󱂅了基板。
在 待机位置 和 󲨉装位置 同󰋋󱂅了基板。
在 󲨉装位置 和 出口 同󰋋󱂅了基板。
在 󲨉装位置 和 出口中󳋉位置同󰋋󱂅了基板。
󳇮󲣄的󲢻󱮛 No
Ea02202 BOARD TRANSFER COMMAND ERROR
This command can't be executed.
Because
detected the Board on Exit Position in Carry Out Command.
detected the Board on Target Position in Carry In Command.
基板送指令󳇮󲣄
无法行󲢺指令。
原因:
行出指令，但出口有基板存在。
行入指令，但目󰓜位置有基板存在。
Ea02203 BOARD TRANSFER COMMAND TIMEOUT ERROR
This command can't be executed because of TimeOut.
Please check each sensor used for this command.
基板送指令超󰋋󳇮󲣄
基板送指令因超󰋋而生了󳇮󲣄。
󲣌确󲡹送用的感器的状。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 58 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea02204 BOARD TRANSFER ERROR
The Board to transfer from entrance has been lost.
Please check the Board on the entrance of the conveyor,
or on the exit of previous machine's conveyor.
Set the Board on the correct position manually.
基板送󳇮󲣄[入理超󰋋]
迷失了入的基板。
可能上位机送中󲱁部，
或者主机送入口附近存在基板。
󲣌将基板放置在正确的位置，然后恢运行。
Ea02205 BOARD TRANSFER ERROR
The timing of board transfer processing and fixed processing
is unusual.
Please execute RESET on this machine.
基板送󳇮󲣄
基板送理和基板固定理的󰋋机异常。
󲣌位机器。
Ea02206 BOARD TRANSFER ERROR RECOVERY
The following Board became the transfer error.
The Board to transfer From position
To position
Please move forward the Board to the next transport position,
and restart Auto Running.
Move forward the Board to [ position ]
基板送󳇮󲣄的解决方法
下列基板生了送󳇮󲣄。
从位置 送至 位置 的基板。
󲣌将基板推至送目的位置后，重新始运行。
将基板推至[ 位置 ]
Ea02207 BOARD TRANSFER ERROR RECOVERY
The following Board became the transfer error.
The Board to transfer From position
To position
Please return the Board to the previous transport position,
and restart Auto Running.
Return the Board to [ position ]
基板送󳇮󲣄的解决方法
下列基板生了送󳇮󲣄。
从位置 送至 位置 的基板。
󲣌将基板放回始送的位置后，重新始运行。
将基板放回[ 位置 ]
Ea02208 Stopper status error
The stopper should rise,
but upper sensor of stopper does not react.
Please check whether stopper of conveyor can move correctly
and upper sensor of stopper react correctly.
Error occurred place
( 1:WaitPos., 2:UpperMountPos., 3:LowerMountPos., 4:ExitPos. )
板状󳇮󲣄
板󲍒在上升状，
但板上升端感器不感。
󲣌确󲡹送装置的板和上升端感器
是否正常作。
󳇮󲣄生位置
( 1:待机位置, 2:上流󲨉装位置, 3:下流󲨉装位置, 4:出口位置 )
Ea02209 BOARD TRANSFER ERROR
Several boards were detected on the lower table.
CAUSE
After the board fixing action, follows two sensors were detected
at the same time.
- Mount position sensor on the lower table.
- Back position sensor from the upper table stopper.
COUNTERMEASURE
- Remove the unexpected board, and set the board on mount position
correctly.
基板送󳇮󲣄
下流工作台有多枚基板存在。
原因
在下流工作台固定基板󰋋，以下两个感器同󰋋󰖕出了基板。
- 下流工作台󲨉装位置感基板的感器
- 上流工作台板一上升就感基板的感器
解决法
- 取出多余的基板，并在󲨉装位置正确地安装基板。
Ea02267 SCHEDULETASKLASTDATE RESTORATION ( FILE:0BYTE )
"ScheduleTaskLastDate.ini" was broken.
And,"ScheduleTaskLastDate.ini" was re-created.
Execution interval of "ScheduleTask" may be shift at first.
󲣘度程序任最󱮝行文件的修( 文件:0BYTE )
由于"ScheduleTaskLastDate.ini"文件已󰀴坏，
所以重新生成了此文件。
首次󲣘度程序任的行󳋉隔可能出󱂅偏差。
Ea02268 SCHEDULETASKLASTDATE RESTORATION ( READ ERROR )
"ScheduleTaskLastDate.ini" was broken.
And,"ScheduleTaskLastDate.ini" was re-created.
Execution interval of "ScheduleTask" may be shift at first.
󲣘度程序任最󱮝行文件的修(无法󲣐入)
由于"ScheduleTaskLastDate.ini"文件已󰀴坏，
所以重新生成了󲢺文件。
首次󲣘度程序任的行󳋉隔可能出󱂅偏差。
Ea02269 BOARD UNKNOWN
Board is not exist at Entrance position,Wait position,
or Upper mount position.
Please set board at wait position.
无法󰖕出基板是否存在
入口、待机位置、上流基板台中不存在基板。
󲣌将基板放置在待机位置。
Ea02307 Failed to open database file.
打数据文件失󲧺了。
Ea02500 INITIALIZATION ERROR
"Servo Board" did not respond.
Machine can't be started.
Please restart the machine software
after clearing this error.
初始化理󳇮󲣄
伺服卡没有答。
不能启机器。
󲣌在清除󳇮󲣄警告后，退出用󲱄件。
Ea02501 INITIALIZATION ERROR
"Servo Board" is not detected.
Machine can't be started.
Please restart the machine software
after clearing this error.
初始化理󳇮󲣄
没有伺服卡。
不能启机器。
󲣌在清除󳇮󲣄警告后，退出用󲱄件。
Ea02502 INITIALIZATION ERROR
Version of Servo-Soft is not correct.
Machine can't be started.
Please restart the machine software
初始化理󳇮󲣄
伺服󲱄件的版本不正确。
不能启机器。
󲣌在清除󳇮󲣄警告后，退出用󲱄件。