YAMAHA 报警资料.pdf - 第152页

Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 152 / 237 Copyright (C) 2009 Y amaha Motor Co.,Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…

100%1 / 237
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 151 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea12027 Changing nozzle... 正在󲲰行吸嘴交󰀷．．．
Ea12028 Checking nozzle condition... 正在󲲰行吸嘴状确󲡹．．．
Ea12029 Warming up... 正在󲲰行暖机运行．．．
Ea12030 Feeding bulk feeder... 正在安装散装元件．．．
Ea12031 Tracing to pick position... 正在向吸附位置跟踪移．．．
Ea12032 Tracing to specified position on Board... 正在向基板上的目󰓜位置跟踪移．．．
Ea12033 Executing fiducial correction... 正在󲲰行基准󰓜󲢅校正．．．
Ea12034 Do you want to reset tray changer? 可以位托󱎭交󰀷器?
Ea12035 Do you want to reset nozzle station? 可以位吸嘴交󰀷站?
Ea12036 Do you want to release Board fixation? 可以解除基板固定?
Ea12037 Do you want to return to Origin? 可以移各󲱉至原点位置?
Ea12038 Press the "EMERGENCY STOP" button. 󲣌按󱧼急停机按󳆃。
Ea12039 Do you want to release FES cart? 可以位一次性󰀷料󲰻?
Ea12040 Releasing FES cart... 正在位一次性󰀷料󲰻．．．
Ea12041 Do you want to clear the MIS data? 生数据管理信息位
位生数据的管理信息。
可以?
Ea12042 Failed to execute %s.
%s is aborted.
没能启 %s 。
中断 %s 。
Ea12043 Do you want to start Return-To-Origin?
Check following points and then press [Yes] to start
RETURN-TO-ORIGIN.
1.Close upper covers.
2.Release "EMERGENCY STOP" and press READY button.
行返回原点?
返回原点󰋋，󲣌先施下列操作，然后再行。
1.󳋂上部机盖。
2.按 ACTIVE 按󳆃，使操作有效。(限存在 ACTIVE 按󳆃󰋋)
3.解除󱧼急停机，按[READY]按󳆃。
Ea12044 (No Use) 行返回原点?
返回原点󰋋，󲣌先施下列操作，然后再行。
1.󳋂上部机盖。
2.将一次性󰀷料󲰻用固定固。
3.按 ACTIVE 按󳆃，使操作有效。(限存在 ACTIVE 按󳆃󰋋)
4.解除󱧼急停机，按[READY]按󳆃。
Ea12045 DELETE FILE
Do you want to delete the file?
文件除确󲡹
除文件?
Ea12046 FILE OVERWRITE
File is already saved.
Do you want to replace it?
文件覆盖保存的确󲡹
文件已存在。
覆盖保存它?
Ea12047 Save abort information 所保存的中断信息
Ea12048 Save Date/Time 保存日期/󰋋󳋉
Ea12049 Board Data Name 基板程序名称
Ea12050 Do you want to change component name of Library?
Library file name and component name is different.
[Yes] Component name is changed by Library name and saved.
[No] Component name is not changed and saved.
[Cancel] Abort.
更改信息元件名?
信息文件名与元件名不一致。
󲳞[是] 将信息元件名更改信息文件名并保存。
󲳞[否] 将元件名直接保存于信息。
󲳞[取消] 什也不做，返回原画面。
Ea12051 Machine control stopped.
Check the message and press [OK] to stop the program.
机器控制已停止。
确󲡹后，󲣌按 OK 󳈃。
程序将󱮨束。
Ea12052 BOARD EXPLORER
Saving Board data.
基板󲨙源管理器
正在保存基板程序．．．
Ea12053 Mount Point 󲨉装数
Ea12054 Block Offset Point 拼位移数
Ea12055 Do you want to load abort information? 加󲱒中断信息?
Ea12056 BOARD DATA SAVE
Board data is changed.
Do you want to save it?
基板程序的保存
基板程序已更改。
需要保存?
Ea12057 CREATE BACKUP
Create backup files.
Insert a floppy disk.
份文件的生成
生成份文件。
󲣌插入󲱄󱎭。
Ea12058 RESTORE BACKUP
Restore backup files.
Insert a floppy disk.
份文件󲲭原
从份文件󲲭原。
󲣌插入󲱄󱎭。
Ea12059 Loading Machine Configuration.... 正在加󲱒机器构成．．．
Ea12060 Loading Machine Data... 正在加󲱒机器数据．．．
Ea12061 Enter a Board name. 󲣌󲱨入基板名称。
Ea12062 Enter a file name. 󲣌󲱨入文件名称。
Ea12063 Floppy disk is not ready. 󲱄󱎭没有插入。
Ea12064 Floppy disk is not formatted. 没有格式化或已󰀴坏。
Ea12065 FORMAT
Formatting disk...
格式化
正在格式化．．．
Ea12066 Failed to format this floppy disk.
Make sure the disk is not write protected.
格式化已失󲧺。
󲢺󲱄󱎭写保状或󲱄󱎭已󰀴坏。
Ea12067 The disk is write protected. 󲱄󱎭写保状。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 152 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea12068 All contents will be lost!
Press [OK] to continue
磁󱎭的内容将全部失去。
您确󲡹?
Ea12069 Failed to clear the disk
Make sure that the disk is not write protected.
磁󱎭的清除已失󲧺。
󲱄󱎭的󲢓置写保或已󰀴坏。
Ea12070 BOARD EXPLORER
Making a data disk...
基板󲨙源管理器
正在生成数据󱎭．．．
Ea12071 Failed to format the disk. 生成磁󱎭已失󲧺。
Ea12072 It's not possible to save Board data in this demo version. 因是示范版，所以不能保存基板程序。
Ea12073 USED DATABASE NUMBER
The database number has already been used.
Do you want to replace it?
数据号󱓖重
󲢺数据号󱓖已󱮤使用。
󲲰行覆盖保存?
Ea12074 DATABASE FULL
There is no empty database number.
Specify a database number which may be replaced.
数据已󰮶
数据没有空󳋇空󳋉。
如保存，󲣌指定数据号󱓖。
Ea12075 DATABASE REMOVE
Data in the database will be removed.
Do you want to continue?
除数据
除所󲳞数据数据。
确要除?
Ea12076 Deleting is completed. 已完成除。
Ea12077 Failed to delete. 除已失󲧺。
Ea12078 BOARD DATA SELECT
Updating file table...
基板󲳞
更新文件表．．．
Ea12079 Failed to update the file table. 文件表的更新失󲧺了。
Ea12080 File table update is completed. 已更新文件表。
Ea12081 No parts to mount in this Board data. 基板程序中没有可以󲨉装的元件。
Ea12082 Copy failed because source
and destination are the same.
因要制的基板名和文件名与制目的位置的相同，
所以不能制！
Ea12083 Enter a Board name! 󲣌󲱨入基板名！！
Ea12084 The setting of feeder plate is misatake. 送料器架的󲢓置󳇮󲣄。
Ea12085 Do you want to save Multi MACS data?
If you save data then Multi MACS data in the machine database
will be changed.
Please confirm and save data.
保存 Multi-MACS 数据?
如保存，数据上的 Multi-MACS 用数据将被更改，
󲣌充分确󲡹后再保存。
Ea12086 This name is already used. 󲢺名称已使用。
Ea12087 Ready to shut down.
Do you want to continue?
After power off, If you re-start the machine, please wait
for 2 seconds and power on again.
已作好切断󱈊源所需的全部准。
可以退出?
切断󱈊源后，重新启󰋋，󲣌󳋉隔至少 2 秒后再打󱈊源。
Ea12088 Saving vision image data file... 正在保存像数据文件．．．
Ea12089 ADJUST
Loading vision image data file...
󲱚助
正在󲣐入像数据文件．．．
Ea12090 LIBRARY SAVE
Do you want to save data into the library?
信息保存
保存在信息。
确保存?
Ea12091 Failed to load the optimizer. 最化程序的加󲱒已失󲧺。
Ea12092 Failed to find an entry point in the optimizer. 没有󱂅最化程序的󲲰入点。
Ea12093 Execute 行
Ea12094 Skip 跳󲲜
Ea12095 RESERVED FILE NAME
This name is to specify another reserved name.
已有󳕙󱭻的文件名
󲢺名称已󱮤󳕙󱭻。
󲣌指定其他的名称。
Ea12096 Dot-Dispense 打点站上
Ea12097 BOARD DATA READ ERROR
Failed to read board data for VIOS text.
because of following reasons;
- This file is not board data of the VIOS text.
- PCBNAME of the board data is an empty data.
基板程序󲣐入󳇮󲣄
VIOS 文本形式的基板程序󲣐入失󲧺了。
可能是因以下原因所致。
- 󲢺文件不是 VIOS 文本形式的基板程序。
- 基板程序的 PCBNAME(基板名)没有󲱨入。
Ea12098 SYSTEM BACKUP
Copying backup...
系󱮴份
正在份．．．
Ea12099 SYSTEM BACKUP
Reconstructing .......
系󱮴份
正在󲲭原．．．
Ea12100 (General Error Message) (普通的󳇮󲣄提示)
Ea12101 Failure. 失󲧺
Ea12102 Error. 󳇮󲣄
Ea12103 System error. 系󱮴󳇮󲣄
Ea12104 Timeout. 超󰋋
Ea12105 Not enough memory. 内存不足
Ea12106 NULL pointer error. NULL 指󳅝󳇮󲣄
Ea12107 This version is invalid. 版本不同
Ea12108 Cancel. 取消
Ea12109 End. 󱮨束
Ea12110 Stop. 停止
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 153 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea12111 Pause. 󰍗󰋋停止
Ea12112 Executing. 正在行．．．
Ea12113 Failed to find out machine. 没有找到机器。
Ea12114 String is empty. 字符串是空的。
Ea12115 String is too long. 字符串󲲜󳉔。
Ea12116 Out of range.
%s
数据在范外。
%s
Ea12117 Buffer is full. 󱯨冲器已󰮶。
Ea12118 Buffer is empty. 󱯨冲器是空的。
Ea12119 Already initialized. 已󱮤初始化。
Ea12120 Not initialized. 没有初始化。
Ea12121 Hardware trouble. 生了硬件方面的故障。
Ea12122 Already used. 已󱮤使用。
Ea12123 Sending. 正在送信．．．
Ea12124 Receiving. 正在接收．．．
Ea12125 Executing. 正在行．．．
Ea12126 Send timeout. 生了送信超󰋋。
Ea12127 Receive timeout. 生了接收超󰋋。
Ea12128 Not received. 没有接收。
Ea12129 Failed to receive. 接收已失󲧺。
Ea12130 Failed to transmit. 送信已失󲧺。
Ea12131 Failed to execute this command. 指令的行已失󲧺。
Ea12132 The transmitance condition is busy. 送信占󱮔。
Ea12133 Failed to create a new file. 文件的建失󲧺了。
Ea12134 Failed to open the file. 文件的打已失󲧺。
Ea12135 Failed to close the file. 文件的󳋂已失󲧺。
Ea12136 Failed to get number of records in the file. 文件的󲢅数的取得已失󲧺。
Ea12137 Failed to load the file. 文件的󲣐入已失󲧺。
Ea12138 Failed to save the file. 文件的写入已失󲧺。
Ea12139 Failed to reserve the file. 文件的󳕙󱭻已失󲧺。
Ea12140 Failed to free the file. 文件的󲺟放已失󲧺。
Ea12141 Failed to seek the file. 文件的󰒺找已失󲧺。
Ea12142 Failed to append the record to the file. 󲢅的添加已失󲧺。
Ea12143 Failed to delete the record from the file. 󲢅的除已失󲧺。
Ea12144 Failed to get number of tables in the file. 文件的表数的取得已失󲧺。
Ea12145 File service not installed. 文件服没有安装。
Ea12146 EOF 已到达 EOF。
Ea12147 File is not found. 没有󱂅文件。
Ea12148 File is not found. 没有󱂅文件。
Ea12149 Too many opened files. 打的文件󲲜多。
Ea12150 The file can not be accessed. 禁止文件󲢔󳋃。
Ea12151 The file is already opened. 文件已打。
Ea12152 The file is not opened. 文件没有打。
Ea12153 The file is already closed. 文件已󳋂。
Ea12154 The file already exists. 文件已存在。
Ea12155 The file is already reserved. 󲢺文件已被其他󲲰程所󳕙定。
Ea12156 The file is not reserved. 文件没有󳕙定。
Ea12157 Could not find the file. 因不是󳕙定的󲲰程，所以不能󲺟放此文件。
Ea12158 Master file is not found. 没有󱂅主文件。
Ea12159 The record is not found. 没有找到󲢅。
Ea12160 The record already exists. 󲢅已󱮤存在。
Ea12161 The table is not found 未能找到表。
Ea12162 The table already exists. 表已󱮤存在。
Ea12163 Invalid file name. 无效的文件名。
Ea12164 The file is read-only. 文件只󲣐文件，不能写入。
Ea12165 Failed to open Memory-mapped-file. 未能打内存映像文件。
Ea12166 Memory-mapped-file is already opened. 内存映像文件已󱮤打。
Ea12167 Memory-mapped-file is not opened. 未打内存映像文件。
Ea12168 Memory-mapped-file error. 内存映像文件生了故障。
Ea12169 Failed to execute this command. 指令的行已失󲧺。
Ea12170 The command is executing. 正在行指令．．．
Ea12171 Could not execute the command. 不能行指令。
Ea12172 Failed to create a window. 窗口的生成已失󲧺。
Ea12173 Failure to Read and Init I/O-list Data
No. %d
不存在必要的 IOLIST 数据。
No. %d
Ea12174 Replace? 置󰀷?
Ea12175 String is not found. 没有找到字符串。
Ea12176 Edit Error
Sort by ""No."" for editing.
󱯫󲱦󳇮󲣄
在 No.以外󲲰行排序󰋋不能󱯫󲱦。
Ea12177 Data is not found on the clipboard. 剪󲨉板上没有数据。