YAMAHA 报警资料.pdf - 第35页
Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 35 / 237 Copyright (C) 2009 Y amaha Motor Co., Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 34 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
is defined as [Use feeder opt.:No] or defined in
STATIC_COMPONENT, or fixed by FEEDER SET CONDITION,
this position is not available to set the feeder
because of this position is not allowed
in FEEDER PLATE INF.
元件因有固定元件参照、或不行最化、或分配条件由送料器固定，
所以不能移，但此位置在送料器架格信息中已置不能安装送料器
型。
Ea00695 DATA ERROR
Failed to set up the alternative component.
Machine
The alternative component
Name
is not fixed in feeder plate.
No space is existing in feeder plate.
数据
替代元件的安装失了。
机器
准安装以下的
替代元件 名称
，但因送料器架上无空位等而不能安装。
Ea00696 When you select the [STATIC_COMPONENTS], cannot
use this function.
固定元件不能使用"用元件号整理"功能。
Ea00697 Fail to set the below component
in Static component.
Machine
Static Comp. Name
The feeder position of the above part is not allowed
in FEEDER PLATE INF.
不能固定下列固定元件内的元件。
机器名称
固定元件号 号 名称
此元件的安装位置，因在送料器架格信息中已
置不可安装，所以未能固定在送料器架上。
Ea00698 Fail to set the below component
in fixed Board.
Machine
FIXED Board
Component Name
The feeder position of the above part is not allowed
in FEEDER PLATE INF.
不能固定下列固定基板内的元件。
机器名称
固定基板
元件数据 号 名称
元件的安装位置，因在送料器架格信息中已
置不可安装，所以不能固定在送料器架上。
Ea00699 Fail to set the below component.
Component Name
This component that a set position fixation
is not available to set the feeder
because of this position is not allowed
Feeder Plate Specification
or a feeder interferes in other parts.
不能固定下列元件。
元件数据 号 名称
元件已指示安装位置固定，但因送料器架格信息
中已置不可安装，或因送料器与其他元件相干，
所以不能固定在送料器架上。
Ea00700 Failed to open component information. 元件信息文件的打失了。
Ea00701 Failed to read component information. 元件信息文件的入失了。
Ea00702 Failed to write component information. 元件信息文件的写入失了。
Ea00703 Component information is not selected. 未元件信息的象行。
Ea00704 There are components on destination whose names are the
same as the one shown below. Do you want to continue?
Component
Component Name
[ESC] key to abort
Any other key to continue
移目的位置上存在与下列元件同名的元件信息。
制行?
元件数据
元件名称
[ESC] : 中止
其 他 : 制行
Ea00705 The component shown below cannot be moved
because it does not fulfill the right conditions.
Component
Component Name
The condition for moving component
Do not use fixed component reference function
Use feeder optimization
因下列元件不足移条件，所以不能移。
元件数据
元件名称
移条件:
·未参照固定元件
·使用送料器最化
Ea00706 The component shown below has "Teaching"
as its "Pos. Definition". Do you want to continue?
Component
Component Name
[ESC] key to abort
Any other key to continue
下列元件的送料器位置算已置示教。
制行?
元件数据
元件名称
[ESC] : 中止
其 他 : 制行
Ea00707 The component is multiplied.
Do you want to define an alternative component?
[ESC] key to abort
Any other key to continue
行替代元件的指定?
[ESC] : 不行
其 他 : 行
Ea00708 The feeder type of component shown below is
multistick.
The multistick that is set in same feeder
set number is not moved.
Do you want to continue?
Component
Component Name
[ESC] key to abort
Any other key to continue
下列元件的送料器型多杆式元件。
不移同一安装位置上的多杆式元件，您要制行?
元件数据
元件名称
[ESC] : 中止
其 他 : 制行
Ea00709 The feeder type of CMP shown below is multistick. 下列元件的送料器型是多杆式的元件。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 35 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Component
Component Name
Which group of multistick do you want to move?
GROUP SET No.
----------------------------------------------
Choose by arrow key. [INS] key to increase SET No.,
and [DEL] key to decrease. [ENTER] key to go.
[ESC] key to abort.
元件数据
元件名称
将移到哪个多杆式元件?
送料器安装号
--------------------------------------------
用[↑]，[↓]。
送料器安装号，用[INS]增加，用[DEL]减少。
用[ENTER]行，用[ESC]止。
Ea00710 Failed to open Board data.
Machine
Board
基板文件的打失了。
机器名称
基板名称
Ea00711 Failed to read Board data.
Machine
Board
基板文件的入失了。
机器名称
基板名称
Ea00712 Failed to write Board data.
Machine
Board
基板文件的写入失了。
机器名称
基板名称
Ea00713 Failed to copy Board data.
Machine
Board
基板文件的制失了。
机器名称
基板名称
Ea00715 Failed to fix the component on the Board.
Machine
Board
不能固定基板程序内的固定元件。
机器名称
基板名称
Ea00716 Multistick CMP. data moving error
In the multistick group, there is CMP data
reserve outside of the multistick group.
So, the multistick CMP data is impossible to move.
Hit any key!
多杆式元件移
在多杆式元件内存在指定多杆式元件以外的
替代元件的数据。
因此，多杆式元件不能移。
按任意。
Ea00720 Fixed component information error
Failed to open fixed component information.
固定元件信息
固定元件信息文件的打失了。
Ea00721 FIXED BOARD DATA MATCHING: FIXED BOARD READ ERROR
Failed to read Fixed Board data.
Please make sure that Fixed Board data exists.
Fixed Board:
固定基板匹配: 固定基板入
所指定的固定基板程序的入已失。
确基板程序是否存在。
固定基板程序名称
Ea00722 Fixed component information error
Failed to write fixed component information.
固定元件信息
固定元件信息文件的写入失了。
Ea00723 FIXED BOARD DATA MATCHING: MISSING PART DATA
Component data of FIXED Board DATA is not existing.
Please make sure that it is exist in FIXED Board DATA.
FIXED Board DATA :
FIXED Board COMP. DATA : No.
Board COMP. DATA : No.
固定基板匹配:元件数据不存在
所指定的固定基板程序的元件数据不存在。
确程序。
固定基板程序名称
固定基板的元件号 号
入基板的元件号 号
Ea00724 Fixed component information error
"Component Name are different for Board data and
fixed component.
固定元件信息
基板程序的元件名称和所指定的固定元件信息的元件名称不一致。
Ea00725 FIXED BOARD DATA MATCHING: MISMATCH FEEDER TYPE ERROR
There are mismatch about FEEDER TYPE.
Please make sure FEEDER TYPE.
FIXED Board DATA :
FIXED Board COMP. DATA : No.
Board COMP. DATA : No.
固定基板匹配: 送料器型不一致
所指定的固定基板程序的元件数据和送料器型不一致。
确程序。
固定基板程序名称
固定基板的元件号 号
入基板的元件号 号
Ea00726 You cannot multiply following components
Use fixed component reference function
Do not use feeder optimization
Tray components
下列元件不能数化。
·参照固定元件的元件
·不行送料器最化的元件
·托元件
Ea00727 Failed to fix the component in fixed component. 不能行固定元件信息内元件的固定。
Ea00730 Alternative component error
Failed to read alternative component.
替代元件
替代元件数据的入失了。
Ea00731 Alternative component error
Loop is not perfect.
Start component number of loop is
Component Name
替代元件
替代元件没有置循。
已始替代循找的元件号是
元件数据 号 名称
Ea00732 Alternative component error
Alternative component specified in the data
does not exist.
Machine
Component Name
替代元件
从下列元件用的替代元件数据不存在。
机器名称
元件数据 号 名称
Ea00733 Alternative component error
"Feeder Type" is not the same as the original one.
替代元件
"使用送料器"不一致。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 36 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
In Static Components, the component data of same name
are dialed with the alternative component.
Each alternative components need to same the above
condition.
如固定元件内存在同名元件，会被是替代元件。
互替代元件的元件，上述置必一致。
Ea00734 Alternative component error
"Required Nozzle" is not the same as the original one.
In Static Components,the component data of same name
are dialed with the alternative component.
Each alternative components need to same the above
condition.
替代元件
"使用吸嘴"不一致。
如固定元件内存在同名元件，会被是替代元件。
互替代元件的元件，上述置必一致。
Ea00735 Alternative component error
"CountOutStop" is not the same as the original one.
In Static Components,the component data of same name
are dialed with the alternative component.
Each alternative components need to same the above
condition.
替代元件
"数束停止"的置不一致。
如固定元件内存在同名元件，会被是替代元件。
互替代元件的元件，上述置必一致。
Ea00736 Alternative component error
"UpdateGroupNo" must be all positive or all 0 in loop.
In Static Components,the component data of same name
are dialed with the alternative component.
Each alternative components need to same the above
condition.
替代元件
"更新号"在循中全部正数或 0。
如固定元件内存在同名元件，会被是替代元件。
互替代元件的元件，上述置必一致。
Ea00737 Alternative component error
Mount table is not the same as the original one.
替代元件
替代元件的置跨越了工作台。
替代元件必在同一工作台中。
Ea00738 Alternative component error
You cannot use alternative function for tray.
替代元件
不可使用托元件的替代元件。
Ea00739 Alternative component error
Component Names are different from the original ones.
替代元件
"元件名称"不一致
Ea00740 Failed to open a fixed component matching work file. 固定元件的匹配作文件的打失了。
Ea00741 Failed to read a fixed component matching work file. 固定元件的匹配作文件的入失了。
Ea00742 Failed to write a fixed component matching work file. 固定元件的匹配作文件的写入失了。
Ea00750 Failed to open a fixed component work file. 固定元件的作文件的打失了。
Ea00751 Failed to read a fixed component work file. 固定元件的作文件的入失了。
Ea00752 Failed to write a fixed component work file. 固定元件的作文件的写入失了。
Ea00760 You cannot multiply component so many times. 元件分割次数超出上限。
Ea00761 Mount data specifies too large a component number. 装数据中指定的元件号大。
Ea00762 Selected Board is not registered
in selected line.
指定的生中，
没有登指定的基板程序。
Ea00763 Too many points, local and 4-point fiducial data. 点、局部、4 点基准数据数多。
Ea00764 Too much mark data. 数据数多。
Ea00765 Illegal mark number is specified in fiducial data. 基准数据中所指定的号异常。
Ea00766 Have you saved component information?
[ESC] key to abort fixed comp.match
Any other key to exec fixed comp.match
保存了元件信息?
[ESC] : 中止固定元件匹配
其 他 : 行固定元件匹配
Ea00767 Have you saved component information?
If not, the data you have changed are lost.
For ex., MULTIPLY COMPONET or FIXED COMPONENT MATCH,
these results will be lost.
[ESC] key to abort auto distribution
Any other key to exec auto distribution
保存了元件信息?
在未保存的情况下行指令，元件分割或固定
元件匹配等的果将失去。
[ESC] : 中止生程序自分配
其 他 : 行生程序自分配
Ea00770 Failed to open nozzle combination information.
The setting of NZL. CONDITION is EDITING.
Edit the nozzle condition in NOZZLE SETTING.
Machine
吸嘴置文件的打失了。
吸嘴置条件手。
在吸嘴置画面置吸嘴。
机器名称
Ea00771 Failed to read nozzle combination information.
Machine
吸嘴置文件的入失了。
机器名称
Ea00772 Failed to write nozzle combination information.
Machine
吸嘴置文件的写入失了。
机器名称
Ea00773 Failed to open non stop distribution information.
Machine
取消替代展的置文件的打失了。
机器名称
Ea00774 Failed to read non stop distribution information.
Machine
取消替代展的置文件的入失了。
机器名称
Ea00775 Failed to write non stop distribution information.
Machine
取消替代展的置文件的写入失了。
机器名称
Ea00780 Failed to read machine configuration.
Machine
机器构成文件的入失了。
机器名称
Ea00781 Failed to read machine data.
Machine
机器数据的入失了。
机器名称
Ea00782 Failed to read machine specification. 机器格的入失了。