YAMAHA 报警资料.pdf - 第211页
Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 21 1 / 237 Copyright (C) 2009 Y amaha Motor Co.,Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chines…
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 210 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea25110 MaskID Error
it is not possible to plan,
because the MaskID of the scanned item corresponding to the
MaskName is different.
Please check the MaskName in PCB Information or confirm
the registration situation of the MaskID with the "ID-Editor".
网板 ID
因描的漏印板 ID 的名称、
所以不能行生。
确基板程序的漏印板名称、
或使用 ID 器确漏印板的登状。
Ea25111 Data Registration Error
The %s name is not registered in board data.
Please register to the board data.
数据未登
基板程序上没有登 %s 名称。
在基板程序上行登。
Ea25112 There is no authority to clear the Error.
Because a serious error occurred, the error cannot be cleared.
Please contact the person responsible who has the error clearness authority
Please scan "Operator ID" with a clear authority.
没有清除限。
因生了重的、所以不能清除。
您系有清除限的人,并描有清除限的操作人的 ID。
Ea25113 ASSIGNMENT CHECK,Internal process error.
The part which hasn't completed a assignment check exists.
Start auto-running again after you confirm a assignment check.
生内部
存在着未完成生的元件。
确生后、重新始运行。
Ea25114 ASSIGNMENT CHECK UN-COMPLETION
The part which hasn't completed an assignment check exists.
Check assignment of the following parts.
Parts Number:
Parts Name :
Feeder set position :
Palette set position :
生
存在着生未完成的元件。
确以下元件的生状况。
元件号:
元件名称:
送料器安装号:
料架安装号: ( )
Ea25115 Splicing Parts Feeder Type Error
In parts that did the splice, there is a possibility of mis-mounting.
The splice cannot be done with specified parts.
In splicing work, this work is stopped because the feeder type is
different from former part and latter part.
Please confirm the feeder types of specified parts.
料拼接元件
有已拼接完成料的元件，有可能安装。
指定的元件之,不能行拼接料。
因拼接料元件与原有元件的送料器的型不一,
所以中断了拼接料。
确元件的料型。
Ea25116 Splicing Error
In parts that did the splice, there is a possibility of mis-mounting.
The splicing work is stopped.
Please confirm whether correct parts are spliced.
Or, please confirm whether parts to be scanned are correct.
料拼接__
有已拼接完料的元件，有可能安装。
拼接料作被中断。
确安装的元件、描象的元件是否
正确。
Ea25117 Splicing Error
In parts that did the splice, there is a possibility of mis-mounting.
The scanned partsID is not registered.
Or, PartsID Info, as parts quantity, are not registered.
Please execute the partsID registration (quantity setting)
at "ID-Editor".
Please confirm whether correct parts are spliced.
Or, please confirm whether parts to be scanned are correct.
料拼接元件
有已拼接完料的元件，有可能安装。
描的元件的元件 ID 未登
使用 ID 器行元件 ID 登作。
另外、确安装的元件、描象的元件是否
正确。
Ea25159 Tray Current Position Error
The "Current Position" exceeds ranges of the number of "Comp Amount".
Please correct the "Current Position" count at the parts remain
edit window.
Component data No Name
Feeder type
Set position No
Current Tray X=, Y=
Comp Amount X=, Y=
Current Position X=, Y=
托交器 当前位置信息
当前位置 XY 的超了元件个数 XY 的范。
在余量画面入正确的当前位置。
元件数据 名称
送料器型
安装位置
托位置 X=, Y=
元件个数 X=, Y=
当前位置 X=, Y=
Ea25500 PARTS REMAIN STOP
Parts remain count reached to the "Stop Parts Count".
Please refill the parts and start auto-running again.
If the parts rest count for the parts is different from the actual
rest count, please correct the parts rest count at the parts remain
edit window and re-start auto-running,please.
Name
Comment
Feeder set position
Parts Stock Position
元件余量停止
下列元件已达到余量停止的数量。
行送料器替或料拼接作后，重新始运行。
如数据上的剩余数和的剩余数不相符，
在余量画面中剩余数后，重新始运行。
名称
注
送料器安装位置 号
元件存号 号
Ea25501 PARTS QUANTITY ERROR 元件装料数
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 211 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Parts quantity is not specified.
Name
Comment
Feeder set position
Palette set position
没有置元件装料数。
名称
注
送料器安装位置 号
料架抽出位置 号
Ea25502 Operator Name Registration Error
Operator name which is registered at ID-Editor is not
registered at "Operator Setting" window.
Please select the "Setup" - "Software Setting" - "Operator
Setting", and execute the operator registration.
Operator name has to be registered at both of "Software Set-
ting" and "ID-Editor".
Operator Name
操作者名未登
在 ID 器中所登的操作者名，没有登在"操作者置"中。
在生画面的"用件置"-"操作者置"中登操作者名。
并且，操作者的登作，必在"用件置"和"ID 器"
两施。
操作者名
Ea25503 Operator Name Registration Error
Operator name for the scanned OperatorID is not registered.
Please execute the operator registration at "ID-Editor".
Operator name has to be registered at both of "Software Set-
ting" and "ID-Editor".
Operator ID
操作者名未登
与所描的操作者 ID 相的操作者名没有登。
在"ID 器"中登操作者名。
并且，操作者的登作，必在"用件置"和"ID 器"
两施。
操作者 ID
Ea25504 Alternative Parts Empty Warning
One of the alternative parts became empty.
Please refill the parts.
Name
Comment
Feeder set position
Palette set position
Parts Stock Position
替代元件用完警告
替代元件中的一个已用完。
行元件充作。
名称
注
送料器安装位置 号
料架抽出位置 号
元件存号 号
Ea25505 File Read Error
It is failed to read the "CartMagazine" file.
Please confirm whether the file path setting is correct at
"Machine" - "Option Setting" window.
If the setting is correct, network trouble or server PC
trouble is considered.
文件入
CartMagazine 文件的入失了。
确"机器置"的"置"中的文件保存的路径是否正确。
如果置正确，可能是由网没有接、数据保存的 PC 没有
启等原因所引起的。
Ea25506 Cart Number Registration Error
The cart number for this cartID is not registered.
Please register the cart number at "ID-Editor".
Cart ID
料号未登
下列料 ID 的料号没有登。
在"ID 器"中，施料号的登。
料 ID
Ea25507 Cart/Magazine Setup Error
This cart/magazine is different from the one registered
for the current board data in advance.
Please setup the correct cart/magazine shown below.
Cart Number
Setting Position
料/收柜安装
安装了不同于事先所指定的料/收柜。
当前所的基板程序，
安装事先所指定的下列料/收柜。
料/收柜号
安装位置
Ea25508 Cart Setup Error
This cart is different from the one registered for the
current board data in advance.
Please setup the correct cart shown below.
Cart Number
Setting Position
料安装
安装了与指定的料不同的料。
安装以下料。
料号
安装位置
Ea25509 Cart Setup Error
This cart is different from the one registered for the
current board data in advance.
Please setup the correct cart shown below.
Cart Number
Setting Position
料安装
安装了与指定的料不相同的料。
安装以下料。
料号
安装位置
Ea25510 Cart Setup Error
This cart is different from the one registered for the
current board data in advance.
Please setup the correct cart shown below.
Cart Number
Setting Position
料安装
安装了与指定的料不相同的料。
安装以下料。
料号
安装位置
Ea25512 Cart Setup Error
For this cart position, no cart is set up.
Please setup the cart and scan the barcode again.
Setting Position
料安装
所描的料位置上没有安装料。
先安装料，然后重新行描作。
安装位置
Ea25513 Cart/Magazine Setup Error
This cart/magazine is already set up to the other
position.
Cart Number
料/收柜安装
描到的料/收柜已安装在了其他的安装位置上。
料/收柜号
Ea25514 Verify Plate error 校送料器架
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 212 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
The scanned plate barcode is not correct.
Please scan the plate barcode shown below.
In feeder verify action, it is required to scan the
same plate barcode at the beginning and the last.
Plate Number
描到的送料器架与正在校的送料器架不一致。
描以下送料器架位置上的送料器架。
送料器架位置
Ea25515 Verify Cart Error
The scanned cart barcode is not correct.
Please scan the cart barcode shown below.
In verify action, it is required to scan the
same cart barcode at the beginning and the last.
Cart Number
校料
描到的料与正在校的料不一致。
描以下料位置上的料。
料号
Ea25516 Feeder/Palette Setup Error
The Feeder/Palette is set to the wrong position.
Please re-setup in the right set position.
Feeder Set Position [%s]
Right Feeder Set Position [%s]
Palette Set Position [%s] %s
Right Palette Set Position [%s] %s
送料器/料架安装位置
送料器/料架的安装位置了。
安装到正确的位置上。
已安装的送料器安装位置 [%s]号
正确的送料器安装位置 [%s]号
已安装的料架安装位置 [%s]号
正确的料架安装位置 [%s]号
Ea25519 Board Data Non-Saved Error
Board data is changed.
Please save the board data to execute the setup check
to the changed board data.
基板程序未保存
基板程序已更改了。
了更改后的基板程序行送料器安装位置，
保存基板程序后，重新入。
Ea25521 Board Data Non-Saved Error
Board data is changed.
To start auto-running, please save the board data.
When using the IT-Option functions, machine cannot
start auto-running with the un-saved board data.
由未保存数据的自运行
基板程序正在。
若要始自运行，保存基板程序。
Ea25522 Data Registration Error
%s data is not registered.
Barcode data for the items shown above which is
specified in the current board data is not
registered.
Please execute the registration at "ID-Editor".
数据未登
%s 未登。
基板程序中所登的上述部材名的条形 ID
没有事先登。
用 ID 器完成登作。
Ea25523 Mirror installation of the alternative
parts is not carried out.
Mirror installation of LED and the adjustment
resistance parts needs to be carried out with
the before side cart and the backside cart.
替代元件未安装反射
LED 和可阻元件有必要在前料和后料
置反射。
Ea25524 Data Registration Error
%s data is not registered.
Item name which is to be checked is not registered
in the current board data.
Please register the item name which is used in the
current board data at "ID-Editor".
数据未登
%s 未登。
所基板程序中，没有登在送料器安装位置中
行的上述部材。
用 ID 器基板程序所使用的部材行登。
Ea25533 Cannot use backside parts
After having constructed the alternative loop,
it is in the state where backside parts cannot be used.
Please confirm a cart, when you exchange
and the cart is used, whether parts are supplied.
Feeder No.
Parts No.
Parts name
Parts comment
后元件不能使用的状
成替代循的后元件呈不能使用的状。
充或交元件，若使用料，将料
置有效。
送料器号 号
元件号 号
元件名称
元件注
Ea25534 Splicing Point Detect Error
Splicing point for the parts below was not detected.
The parts rest count can be wrong.
Please correct the rest count at the parts remain edit
window and start auto-running,
Feeder No.
Parts No.
Parts name
Parts comment
接出
未能出下列元件料拼接的接。
行料拼接的料剩余数可能不正确。
在余量画面中修改剩余数后，重新始运行。
送料器号 号
元件号 号
元件名称
元件注
Ea25535 REFILL THE ENTIRE TRAY
The rest count for the entire tray is initialized.
Do you want to refill the entire tray for this parts?
全托充
将全部托的元件剩余数充数。
您确定?
Ea25536 Reel Remove
The selected reel is now used on the machine.
Is it OK to remove the reel from the machine?
卸下料
所料正在机器中使用。
是否从机器中卸下料?
Ea25537 Magazine Number Registration Error 收柜号未登