YAMAHA 报警资料.pdf - 第182页
Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 182 / 237 Copyright (C) 2009 Y amaha Motor Co.,Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 181 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
1. When it is detected that a part is not
present before recognition or mounting.
This check is performed only when
vacuum check is set to special check.
2. When it is detected that a part is not picked
at the center of the nozzle at the
time of recognition.
3. When a part can not be detected
at the time of recognition.
4. When "Ea97" error occurred
Data is saved at the time
of a Board data change.
1．前或者装前，判断没有吸附到元件。
，限吸附·放真空置特殊的候才行。
2．果没能将元件吸附到吸嘴的中心。
3．，没有找到象物。
4．生 "Ea97" 。
切基板程序自合保存。
Ea14173 Unit Log - Parts(Reenact Data) - Error per cent(%)
The ratio of the number of
pickup errors / amount of consumption of this part.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 出率(%)
元件的 吸料次数/消耗量 的比率。
切基板程序自合保存。
Ea14174 Unit Log - Parts(Reenact Data) - Vision Error Counter
Vision error count including retry.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 出次数(包括重新行)
元件生的次数。
切基板程序自合保存。
Ea14175 Unit Log - Parts(Reenact Data) - Error per cent(%)
The ratio of the number of
vision errors / amount of consumption of this part.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 出率(%)
元件的 次数/消耗量 的比率
切基板程序自合保存。
Ea14176 Unit Log - Parts(Reenact Data) - No Parts Error Counter
It counts, when a pickup error, a recognition
error, etc. occur continuously with the same
parts and exceeds the retry count setting.
If retry count is set at "2", the No Parts Error counter
will increment with "3" because the error
occurred 3 times consecutively.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 无元件出次数
元件生无元件的次数。
同一元件生的吸料、，超了置
的重新行数，以出的次数数。
例如，重新行数置"2"， 3 次生，出次数以"3"数。
切基板程序自合保存。
Ea14177 Unit Log - Parts(Reenact Data) - Error per cent(%)
The ratio of the number of
no parts errors / amount of consumption of this part.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 出率(%)
元件 无元件次数/消耗量 的比率
切基板程序自合保存。
Ea14178 Unit Log - Parts(Reenact Data) - Nozzle Error Counter
Nozzle error count including retry.
The number of times a part was picked up
and recognized, but the offset of the part
was out of tolerance.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 吸嘴出次数
元件生吸嘴堵塞的次数。
(包括重新行)
元件的果元件的中心坐异常，数。
切基板程序自合保存。
Ea14179 Unit Log - Parts(Reenact Data) - Error per cent(%)
The ratio of the number of
nozzle errors / amount of consumption of this part.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 出率(%)
元件的 吸嘴次数/消耗量 的比率。
切基板程序自合保存。
Ea14180 Unit Log - Parts(Reenact Data) - Consumption
Parts Consumption Counter
The part count for e.g. test picking
is excluded. When a part is picked normally,
it is counted.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 消耗数
元件的消耗数。
算自运行中所消耗的元件数，因吸料等消耗的元件不被数。
元件正常吸附数。
切基板程序自合保存。
Ea14181 Unit Log - Parts(Reenact Data) - Change Counter
Change Counter
(This data is not used.)
履 2 元件(史数据) 料更次数
元件的料更次数
(数据没有使用)
Ea14182 Unit Log - Parts(Reenact Data) - Feeder Type
The "Feeder Type" of part data is displayed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 送料器型
元件的送料器型。
示在元件数据的"送料器型"中的置。
切基板程序自合保存。
Ea14183 Unit Log - Parts(Reenact Data) - Feeder Set No.
The "Feeder Set No." of part data is displayed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 送料器安装号
元件的送料器安装号。
示元件数据的"送料器安装位置"中的置。
切基板程序自合保存。
Ea14184 Unit Log - Parts(Reenact Data) - Nozzle Type
The "Required Nozzle" of part data is displayed.
履 2 元件(史数据) 吸嘴型
元件的吸嘴型号。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 182 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Data is saved at the time
of a Board data change.
示元件数据的"使用吸嘴"中的置。
切基板程序自合保存。
Ea14185 Unit Log - Parts(Reenact Data) - Pick Speed
"Pick Speed (%)" of part data is expressed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 吸料速度
元件的吸附速度。
示元件数据的"吸附速度(%)"中的置。
切基板程序自合保存。
Ea14186 Unit Log - Parts(Reenact Data) - Pick Timer
"Pick Timer sec" of part data is displayed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 吸附
元件的吸附。
示元件数据的"吸料(秒)"中的置。
切基板程序自合保存。
Ea14187 Unit Log - Parts(Reenact Data) - Pick Height
"Pick Height (mm)" of part data is displayed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 吸料高度
元件的吸料高度。
示元件数据的"吸料高度(mm)"。
基板程序切自合保存。
Ea14188 Unit Log - Parts(Reenact Data) - Mount Speed
"Mount Speed (%)" of part data is displayed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 装速度
元件的装速度。
示元件数据的"装速度(%)"中的置。
切基板程序自合保存。
Ea14189 Unit Log - Parts(Reenact Data) - Mount Timer
"Mount Timer sec" of part data is displayed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 装
元件的装。
示元件数据的"装(秒)"中的置。
切基板程序自合保存。
Ea14190 Unit Log - Parts(Reenact Data) - Mount Height
"Mount Height (mm)" of part data is displayed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 装高度
元件的装高度
示元件数据的"装高度(mm)"中的置。
切基板程序自合保存。
Ea14191 Unit Log - Parts(Reenact Data) - Alignment Type
The "Alignment Type" of part data is displayed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 型
元件的型。
示元件数据的"校正型"中的置。
切基板程序自合保存。
Ea14192 Unit Log - Parts(Reenact Data) - Threshold
The "Part Threshold" of part data is displayed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 界限
元件的界限。
示元件数据的"元件界限"中的置。
切基板程序自合保存。
Ea14193 Unit Log - Parts(Reenact Data) - Coplanarity Error Counter
Coplanarity Error Counter
履 2 元件(史数据) 引脚起出次数
元件生引脚起的次数
Ea14194 Unit Log - Parts(Reenact Data) - Error percent(%)
Error per cent(%)
履 2 元件(史数据) 出率(%)
元件的 引脚起次数/消耗量 的比率
Ea14200 Unit PartsWafer(Current Data) Parts No.
Parts No.
履 2 晶片元件(在的数据) 元件号
示元件的号。
Ea14201 Unit PartsWafer(Current Data) Parts Name
Parts Name
履 2 晶片元件(在的数据) 元件名
示元件的名称。
Ea14202 Unit PartsWafer(Current Data) Fiducial Error Counter
Fid Error Counter
履 2 晶片元件(在的数据) 基准出次数
元件中生基准的次数。
Ea14203 Unit PartsWafer(Current Data) Fiducial Error percent(%)
Fid Error Per cent
履 2 晶片元件(在的数据) 基准出率
元件中生基准的比率。
Ea14204 Unit PartsWafer(Current Data) Bad Error Counter
Bad Error Counter
履 2 晶片元件(在的数据) 坏板出次数
元件中生坏板的次数。
Ea14205 Unit PartsWafer(Current Data) Bad Error percent(%)
Bad Error Per cent
履 2 晶片元件(在的数据) 坏板出率
元件中生坏板的比率。
Ea14206 Unit PartsWafer(Current Data) Consumption
Consumption
履 2 晶片元件(在的数据) 消耗数
示消耗数。
Ea14210 Unit PartsWafer(Reenact Data) Parts Name
Parts Name
履 2 晶片元件(史数据) 元件名
示元件名称。
Ea14211 Unit PartsWafer(Reenact Data) Date
Date
履 2 晶片元件(史数据) 始日期
示始元件的。
Ea14212 Unit PartsWafer(Reenact Data) Fiducial Error Counter
Fiducial Error Counter
履 2 晶片元件(史数据) 基准出次数
元件生基准的次数。
Ea14213 Unit PartsWafer(Reenact Data) Fiducial Error percent(%)
Fiducial Error Per cent
履 2 晶片元件(史数据) 基准出率
元件生基准的比率。
Ea14214 Unit PartsWafer(Reenact Data) Bad Error Counter
Bad Error Counter
履 2 晶片元件(史数据) 坏板出次数
元件生坏板的次数。
Ea14215 Unit PartsWafer(Reenact Data) Bad Error percent(%)
Bad Error Per cent
履 2 晶片元件(史数据) 坏板出率
元件生坏板的比率。
Ea14216 Unit PartsWafer(Reenact Data) Consumption
Consumption
履 2 晶片元件(史数据) 消耗数
示消耗数。
Ea14220 Unit Log Wafer Item
Item
履 2 晶片目
示晶片的目名。
Ea14221 Unit Log Wafer Date
Date
履 2 晶片 始日期
示晶片目的始日期。
Ea14222 Unit Log Wafer Counter
Counter
履 2 晶片 作次数
示晶片目的作次数。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 183 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea14223 Unit Log Wafer Error Counter
Error Counter
履 2 晶片 出次数
示晶片目生的次数。
Ea14224 Unit Log Wafer Error percent(%)
Error Per cent
履 2 晶片 出率
示晶片目生的比率。
Ea14500 MIS - Board Log - Program Name
Program name (Board name) to produce boards.
履 1 生 批名
已完成生的基板的程序名(批名)。
Ea14501 MIS - Board Log - Program Comment
Program comment(Lot ID) to produce boards.
履 1 生 批 ID
已完成生的基板的程序的注(批 ID)。
Ea14502 MIS - Board Log - Start Time
Time to start producing boards.
履 1 生 生始
始基板生的。
Ea14503 MIS - Board Log - Finish Time
Time to finish producing boards.
履 1 生 生束
完成基板生的。
Ea14504 MIS - Board Log - Board Count Max
Board count, which was specified at the time of production.
履 1 生 定枚数
生批基板所指定的定生枚数。
Ea14505 MIS - Board Log - Board Serial No
Board serial number in the lot.
履 1 生 批内序号
1 批基板中基板的序列号。
Ea14506 MIS - Board Log - Finish Flag
0: Production complete.
1: Production incomplete due to reset or other reason.
履 1 生 束志
0: 基板生已完成。
1: 因中途行位等，没有完成生。
Ea14507 MIS - Board Log - Print CT
Time to produce board.
履 1 生 印刷(秒)
印刷基板所用的。
Ea14508 MIS - Board Log - Transfer CT
Time to transfer board.
履 1 生 送 CT(秒)
送基板所用的。
Ea14509 MIS - Board Log - Upstream Standby CT
Time waiting for upstream machine (starved).
履 1 生 上位待机 CT(秒)
基板作中等待上位机的待机。
Ea14510 MIS - Board Log - Downstream Standby CT
Time waiting for downstream machine (blocked).
履 1 生 下位机待机 CT(秒)
基板作中等待下位机的待机
Ea14511 MIS - Board Log - MarkRec CT
Time to recognize marks(Board fiducial).
履 1 生 CT(秒)
基板的基板基准等所用的。
Ea14512 MIS - Board Log - MaskMarkRec CT
Time to recognize marks(Mask fiducial).
履 1 生 网板 CT(秒)
基板的网板基准等所用的。
Ea14513 MIS - Board Log - Inspection Time
Time to execute print inspection.
履 1 生 (秒)
基板行印刷所用的。
Ea14514 MIS - Board Log - Cleaning Time
Time to execute cleaning.
履 1 生 清(秒)
基板作中行清所用的
Ea14515 MIS - Board Log - Mark Vision Error
Mark recognition error count including retry during
the board's production.
履 1 生 出次数
基板作中生的次数
(包括重新行)
Ea14516 MIS - Board Log - Transfer Error
Board transfer error count during the board's production.
履 1 生 送出次数
基板作中送的生次数
Ea14517 MIS - Board Log - Other Error
Other error count during the board's production.
履 1 生 其他出次数
基板作中其他的生次数
Ea14518 MIS - Board Log - Stop Number
Error stop count during the board's production.
履 1 生 出停止次数
基板作中机器因出而停机的次数
Ea14519 MIS - Board Log - Operator Call Time
Time from error to error clear during the board's production.
履 1 生 出停止(秒)
基板作中从生到清除之停机的
Ea14520 MIS - Board Log - Recovery Time
Time from error clear to restart production during
the board's production.
履 1 生 出修(秒)
基板作中从清除示到重新启机器所用的。
Ea14521 MIS - Board Log - Board Inspection
0: The result of Board inspection was OK.
1: The result of Board inspection was NG.
履 1 生 印刷
0: 印刷 OK.
1: 印刷 NG.
Ea14522 MIS - Board Log - Board Distortion Check
0: The result of Board distortion check was OK.
1: The result of Board distortion check was NG.
履 1 生 基板歪斜
0: 基板歪斜确 OK.
1: 基板歪斜确 NG.
Ea14523 MIS - Board Log - Board Remove
0: Board was not removed.
1: Board was removed.
履 1 生 取出基板
0: 未取出基板。
1: 已取出基板。
Ea14524 MIS - Board Log - Board Reentry
0: Board was not reentered.
1: Board was reentered.
履 1 生 放入基板
0: 未放入基板。
1: 已放入基板。
Ea14525 MIS - Board Log - Feedback Print
0: Feedback print was not executed.
1: Feedback print was executed.
履 1 生 多重印刷反
0: 未行多重印刷反。
1: 已行了多重印刷反。
Ea14526 MIS - Board Log - Feedback Cleaning
0: Feedback cleaning was not executed.
1: Feedback cleaning was executed.
履 1 生 清反
0: 未行清反。
1: 已行了清反。
Ea14530 MIS - Program Log - Program Name
Program name (Board name) to produce the lot.
履 1 批 批名
已完成生的批基板的程序名。
Ea14531 MIS - Program Log - Program Comment
Program comment to produce the lot.
履 1 批 批 ID
已完成生的批基板程序的注