YAMAHA 报警资料.pdf - 第181页
Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 181 / 237 Copyright (C) 2009 Y amaha Motor Co.,Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 180 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
and recognized, but the offset of the part
was out of tolerance.
元件的果元件中心坐异常，数。
Ea14149 Unit Log - Parts(Current Data) - Error per cent(%)
The ratio of the number of
nozzle errors / amount of consumption of this part.
履 2 元件(当前的数据) 出率(%)
元件的 吸嘴次数/消耗量 的比率
Ea14150 Unit Log - Parts(Current Data) - Consumption
Parts consumption counter
The part count for the e.g. test picking
is excluded.
When a part is picked normally, it is counted.
履 2 元件(当前的数据) 消耗数
元件的消耗数。
算自运行中所消耗的元件数，因吸附等消耗的元件不被数。
正常吸附元件，才数。
Ea14151 Unit Log - Parts(Current Data) - Change Counter
Change Counter
(This data is not used.)
履 2 元件(当前的数据) 料更次数
元件的料更次数
(数据没有使用)
Ea14152 Unit Log - Parts(Current Data) - Feeder Type
The "Feeder Type" of part data is displayed.
When it is changed during production, it is updated at
the time of the auto running start.
履 2 元件(当前的数据) 送料器型
元件的送料器型。
示元件数据的"送料器型"中的置。
如果中途更改，自运行始会自更新。
Ea14153 Unit Log - Parts(Current Data) - Feeder Set No.
The "Feeder Set No." of part data is displayed.
When changed during production, it is updated at
the time of the auto running start.
履 2 元件(当前的数据) 送料器安装号
元件的送料器安装号。
示元件数据的 "送料器安装位置"中的置。
如果中途更改，自运行始会自更新。
Ea14154 Unit Log - Parts(Current Data) - Nozzle Type
The "Required Nozzle" of part data is displayed.
When changed during production, it is updated at
the time of the auto running start.
履 2 元件(当前的数据) 吸嘴型
元件的吸嘴型。
示元件数据的"使用吸嘴"中的置。
如果中途更改，自运行始会自更新。
Ea14155 Unit log - Parts(Current Data) - Pick Speed
"Pick Speed (%)" of part data is expressed.
When changed during production, it is updated at
the time of the auto running start.
履 2 元件(当前的数据) 吸料速度
元件的吸附速度。
示元件数据的"吸附速度(%)"中置。
如果中途更改，自运行始会自更新。
Ea14156 Unit Log - Parts(Current Data) - Pick Timer
"Pick Timer sec" of part data is displayed.
When changed during production, it is updated at
the time of the auto running start.
履 2 元件(当前的数据) 吸附
元件的吸附。
示元件数据的"吸附(秒)"中的置。
如果中途更改，自运行始会自更新。
Ea14157 Unit Log - Parts(Current Data) - Pick Height
"Pick Height (mm)" of part data is displayed.
When changed during production, it is updated at
the time of the auto running start.
履 2 元件(当前的数据) 吸料高度
元件的吸料高度。
示元件数据的"吸料高度(mm)"中的置。
如果中途更改，自运行始会自更新。
Ea14158 Unit Log - Parts(Current Data) - Mount Speed
"Mount Speed (%)" of part data is displayed.
When changed during production, it is updated at
the time of the auto running start.
履 2 元件(当前的数据) 装速度
元件的装速度。
示元件数据的"装速度(%)"中的置。
如果中途更改，自运行始会自更新。
Ea14159 Unit Log - Parts(Current Data) - Mount Timer
"Mount Timer sec" of part data is displayed.
When changed during production, it is updated at
the time of the auto running start.
履 2 元件(当前的数据) 装
元件的装。
示元件数据的"装(秒)"中的置。
如果中途更改，自运行始会自更新。
Ea14160 Unit Log - Parts(Current Data) - Mount Height
"Mount height (mm)" of part data is displayed.
When changed during production, it is updated at
the time of the auto running start.
履 2 元件(当前的数据) 装高度
元件的装高度。
示元件数据的"装高度(mm)"中的置。
如果中途更改，自运行始会自更新。
Ea14161 Unit Log - Parts(Current Data) - Alignment Type
The "Alignment Type" of part data is displayed.
When changed during production, it is updated at
the time of the auto running start.
履 2 元件(当前的数据) 型
元件的型。
示元件数据的"校正型"中的置。
如果中途更改，自运行始会自更新。
Ea14162 Unit Log - Parts(Current Data) - Threshold
The "Part Threshold" of part data is displayed.
When changed during production, it is updated at the
time of the auto running start.
履 2 元件(当前的数据) 界限
元件的界限。
示元件数据的"元件界限"中的置。
如果中途更改，自运行始会自更新。
Ea14163 Unit Log - Parts(Current Data) - Coplanarity Error Counter
Coplanarity Error Counter
履 2 元件(当前的数据) 引脚起出次数
元件生引脚起的次数
Ea14164 Unit Log - Parts(Current Data) - Error per cent(%)
Error per cent(%)
履 2 元件(当前的数据) 出率(%)
元件的 引脚起的次数/消耗量 的比率
Ea14170 Unit Log - Parts(Reenact Data) - Part Name
Parts name is displayed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 元件名
示元件名。
切基板程序自合保存。
Ea14171 Unit Log - Parts(Reenact Data) - Date
Time which started measurement
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 始
元件的始。
切基板程序自合保存。
Ea14172 Unit Log - Parts(Reenact Data) - Pick Error Counter
Pickup error count including retry.
In the following case, it counts.
履 2 元件(史数据) 吸料出次数
元件生吸附的次数(包括重新行)。
下列情况将数。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 181 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
1. When it is detected that a part is not
present before recognition or mounting.
This check is performed only when
vacuum check is set to special check.
2. When it is detected that a part is not picked
at the center of the nozzle at the
time of recognition.
3. When a part can not be detected
at the time of recognition.
4. When "Ea97" error occurred
Data is saved at the time
of a Board data change.
1．前或者装前，判断没有吸附到元件。
，限吸附·放真空置特殊的候才行。
2．果没能将元件吸附到吸嘴的中心。
3．，没有找到象物。
4．生 "Ea97" 。
切基板程序自合保存。
Ea14173 Unit Log - Parts(Reenact Data) - Error per cent(%)
The ratio of the number of
pickup errors / amount of consumption of this part.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 出率(%)
元件的 吸料次数/消耗量 的比率。
切基板程序自合保存。
Ea14174 Unit Log - Parts(Reenact Data) - Vision Error Counter
Vision error count including retry.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 出次数(包括重新行)
元件生的次数。
切基板程序自合保存。
Ea14175 Unit Log - Parts(Reenact Data) - Error per cent(%)
The ratio of the number of
vision errors / amount of consumption of this part.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 出率(%)
元件的 次数/消耗量 的比率
切基板程序自合保存。
Ea14176 Unit Log - Parts(Reenact Data) - No Parts Error Counter
It counts, when a pickup error, a recognition
error, etc. occur continuously with the same
parts and exceeds the retry count setting.
If retry count is set at "2", the No Parts Error counter
will increment with "3" because the error
occurred 3 times consecutively.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 无元件出次数
元件生无元件的次数。
同一元件生的吸料、，超了置
的重新行数，以出的次数数。
例如，重新行数置"2"， 3 次生，出次数以"3"数。
切基板程序自合保存。
Ea14177 Unit Log - Parts(Reenact Data) - Error per cent(%)
The ratio of the number of
no parts errors / amount of consumption of this part.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 出率(%)
元件 无元件次数/消耗量 的比率
切基板程序自合保存。
Ea14178 Unit Log - Parts(Reenact Data) - Nozzle Error Counter
Nozzle error count including retry.
The number of times a part was picked up
and recognized, but the offset of the part
was out of tolerance.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 吸嘴出次数
元件生吸嘴堵塞的次数。
(包括重新行)
元件的果元件的中心坐异常，数。
切基板程序自合保存。
Ea14179 Unit Log - Parts(Reenact Data) - Error per cent(%)
The ratio of the number of
nozzle errors / amount of consumption of this part.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 出率(%)
元件的 吸嘴次数/消耗量 的比率。
切基板程序自合保存。
Ea14180 Unit Log - Parts(Reenact Data) - Consumption
Parts Consumption Counter
The part count for e.g. test picking
is excluded. When a part is picked normally,
it is counted.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 消耗数
元件的消耗数。
算自运行中所消耗的元件数，因吸料等消耗的元件不被数。
元件正常吸附数。
切基板程序自合保存。
Ea14181 Unit Log - Parts(Reenact Data) - Change Counter
Change Counter
(This data is not used.)
履 2 元件(史数据) 料更次数
元件的料更次数
(数据没有使用)
Ea14182 Unit Log - Parts(Reenact Data) - Feeder Type
The "Feeder Type" of part data is displayed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 送料器型
元件的送料器型。
示在元件数据的"送料器型"中的置。
切基板程序自合保存。
Ea14183 Unit Log - Parts(Reenact Data) - Feeder Set No.
The "Feeder Set No." of part data is displayed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 送料器安装号
元件的送料器安装号。
示元件数据的"送料器安装位置"中的置。
切基板程序自合保存。
Ea14184 Unit Log - Parts(Reenact Data) - Nozzle Type
The "Required Nozzle" of part data is displayed.
履 2 元件(史数据) 吸嘴型
元件的吸嘴型号。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 182 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Data is saved at the time
of a Board data change.
示元件数据的"使用吸嘴"中的置。
切基板程序自合保存。
Ea14185 Unit Log - Parts(Reenact Data) - Pick Speed
"Pick Speed (%)" of part data is expressed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 吸料速度
元件的吸附速度。
示元件数据的"吸附速度(%)"中的置。
切基板程序自合保存。
Ea14186 Unit Log - Parts(Reenact Data) - Pick Timer
"Pick Timer sec" of part data is displayed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 吸附
元件的吸附。
示元件数据的"吸料(秒)"中的置。
切基板程序自合保存。
Ea14187 Unit Log - Parts(Reenact Data) - Pick Height
"Pick Height (mm)" of part data is displayed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 吸料高度
元件的吸料高度。
示元件数据的"吸料高度(mm)"。
基板程序切自合保存。
Ea14188 Unit Log - Parts(Reenact Data) - Mount Speed
"Mount Speed (%)" of part data is displayed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 装速度
元件的装速度。
示元件数据的"装速度(%)"中的置。
切基板程序自合保存。
Ea14189 Unit Log - Parts(Reenact Data) - Mount Timer
"Mount Timer sec" of part data is displayed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 装
元件的装。
示元件数据的"装(秒)"中的置。
切基板程序自合保存。
Ea14190 Unit Log - Parts(Reenact Data) - Mount Height
"Mount Height (mm)" of part data is displayed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 装高度
元件的装高度
示元件数据的"装高度(mm)"中的置。
切基板程序自合保存。
Ea14191 Unit Log - Parts(Reenact Data) - Alignment Type
The "Alignment Type" of part data is displayed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 型
元件的型。
示元件数据的"校正型"中的置。
切基板程序自合保存。
Ea14192 Unit Log - Parts(Reenact Data) - Threshold
The "Part Threshold" of part data is displayed.
Data is saved at the time
of a Board data change.
履 2 元件(史数据) 界限
元件的界限。
示元件数据的"元件界限"中的置。
切基板程序自合保存。
Ea14193 Unit Log - Parts(Reenact Data) - Coplanarity Error Counter
Coplanarity Error Counter
履 2 元件(史数据) 引脚起出次数
元件生引脚起的次数
Ea14194 Unit Log - Parts(Reenact Data) - Error percent(%)
Error per cent(%)
履 2 元件(史数据) 出率(%)
元件的 引脚起次数/消耗量 的比率
Ea14200 Unit PartsWafer(Current Data) Parts No.
Parts No.
履 2 晶片元件(在的数据) 元件号
示元件的号。
Ea14201 Unit PartsWafer(Current Data) Parts Name
Parts Name
履 2 晶片元件(在的数据) 元件名
示元件的名称。
Ea14202 Unit PartsWafer(Current Data) Fiducial Error Counter
Fid Error Counter
履 2 晶片元件(在的数据) 基准出次数
元件中生基准的次数。
Ea14203 Unit PartsWafer(Current Data) Fiducial Error percent(%)
Fid Error Per cent
履 2 晶片元件(在的数据) 基准出率
元件中生基准的比率。
Ea14204 Unit PartsWafer(Current Data) Bad Error Counter
Bad Error Counter
履 2 晶片元件(在的数据) 坏板出次数
元件中生坏板的次数。
Ea14205 Unit PartsWafer(Current Data) Bad Error percent(%)
Bad Error Per cent
履 2 晶片元件(在的数据) 坏板出率
元件中生坏板的比率。
Ea14206 Unit PartsWafer(Current Data) Consumption
Consumption
履 2 晶片元件(在的数据) 消耗数
示消耗数。
Ea14210 Unit PartsWafer(Reenact Data) Parts Name
Parts Name
履 2 晶片元件(史数据) 元件名
示元件名称。
Ea14211 Unit PartsWafer(Reenact Data) Date
Date
履 2 晶片元件(史数据) 始日期
示始元件的。
Ea14212 Unit PartsWafer(Reenact Data) Fiducial Error Counter
Fiducial Error Counter
履 2 晶片元件(史数据) 基准出次数
元件生基准的次数。
Ea14213 Unit PartsWafer(Reenact Data) Fiducial Error percent(%)
Fiducial Error Per cent
履 2 晶片元件(史数据) 基准出率
元件生基准的比率。
Ea14214 Unit PartsWafer(Reenact Data) Bad Error Counter
Bad Error Counter
履 2 晶片元件(史数据) 坏板出次数
元件生坏板的次数。
Ea14215 Unit PartsWafer(Reenact Data) Bad Error percent(%)
Bad Error Per cent
履 2 晶片元件(史数据) 坏板出率
元件生坏板的比率。
Ea14216 Unit PartsWafer(Reenact Data) Consumption
Consumption
履 2 晶片元件(史数据) 消耗数
示消耗数。
Ea14220 Unit Log Wafer Item
Item
履 2 晶片目
示晶片的目名。
Ea14221 Unit Log Wafer Date
Date
履 2 晶片 始日期
示晶片目的始日期。
Ea14222 Unit Log Wafer Counter
Counter
履 2 晶片 作次数
示晶片目的作次数。