YAMAHA 报警资料.pdf - 第161页
Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 161 / 237 Copyright (C) 2009 Y amaha Motor Co.,Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 160 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
The current Board data was changed by another application.
Re-read Board data?
当前的基板程序因其它用件而被更改了。
是否重新入基板程序?
Ea12387 The power of machine was turned on. 已将机器的源置 ON。
Ea12388 The power of machine was turned off. 已将机器的源置 OFF。
Ea12389 Some heads of machine or tray changer may still have parts.
Please remove parts and reset a machine before you do this operation.
装或者托交器正在吸附中
机器的装或者托交器的 Head 正在吸附中。
如入基板程序，将行位理，可能使吸附
中的元件掉落。
使机器于急停机状，并取出元件，行
位，然后再次行基板。
Ea12390 << WARNING >> AUTO RUNNING WITH UNSAVED DATA
This Board data is being edited.
If you continue auto running, please press the YES button.
Otherwise, please press the NO button.
<< 警告 >> 用未保存数据行的自运行
当前中的基板程序已更改。
是否始自运行?
Ea12391 Measuring height or resetting laser ... 正在行有激光位的作．．．
Ea12392 Measuring length of nozzle ... 正在行吸嘴高度量．．．
Ea12393 Would you like to reset the laser height sensor ? 是否位激光位?
Ea12394 Dipping ... 正在浸胶．．．
Ea12395 Finish to reset the laser height sensor. 已位激光位。
Ea12396 Finish to measure.
RESULT %6.3f mm
激光高度量已成功。
果 %6.3f mm
Ea12397 Finish to measure the length of nozzle. 吸嘴高度量已成功。
Ea12398 Aborted measuring the length of nozzle. 已中断吸嘴高度量。
Ea12399 Incomplete Object Data
%d-object(s) data can not be converted.
Incomplete data is shown by skipping data.
In case of object size is 0mm, there are no aperture data,
or the shape of object is not specified.
->Please check size and area ratio of object(s).
The other skipping data is composed by multiple shapes
in Gerber data, so the area could be calculated.
->Please check area ratio of object(s).
存在不完全的象数据。
%d 个象数据，未能行。
用跳生成的象数据中，
· 象尺寸 0mm 的数据，不存在孔径数据，或者形状
未能特定。
-> 确象尺寸及外形面比率。
· 除上述以外的跳数据，在 GBR 数据中，因网板口
部用多形状合成来表示，所以象面的算失
了。
-> 确外形面比率。
Ea12400 Data Save Error
A folder name is not specified.
数据保存
没有指定文件名称。
Ea12401 Data Save Error
A file name is not specified.
数据保存
没有指定文件名称。
Ea12402 Data Save
Now Saving the data ...
数据保存
正在保存数据．．．
Ea12403 Data Save Error
Failed to save the data files.
数据保存
数据的保存已失。
Ea12404 Assignment
Would you like to assign the mount-order and
pick-group automatically?
是否行吸料和装序的自排?
Ea12405 Save and reset log
After saving Board log, program log and parts log,
logs will be reset.
Do you want to continue?
[OK] continue
[Cancel] abort
履合保存及初始化
合保存生履，批次履，元件履后，
行初始化理。
确行?
Ea12406 Block Distribution Error
Block offsets are not valid.
拼展
不存在位移数据。
Ea12407 Block Distribution Error
The distributed data number exceeds
the limit for Dot Dispense data.
拼展
展后的正式点胶数据数超了上限。
Ea12408 Block Distribution Error
The distributed data number exceeds
the limit for Local Bad Mark data.
拼展
展后的坏板数据数超了上限。
Ea12409 Block Distribution Error
The distributed data number exceeds
the limit for Local Fid Mark data.
拼展
展后的基准数据数超了上限。
Ea12410 Block Distribution Error
The distributed data number exceeds
the limit for Mount data.
拼展
展后的装数据数超了上限。
Ea12411 DISPENSE WARNING
The remaining quantity of liquid reached the warning level.
Please prepare the liquid to be exchanged.
Head number %d
胶液余量警告
胶液量的余量已到达警告。
准胶液。
点胶号 %d 号
Ea12412 Block Distribution Error
The distributed data number exceeds
the limit for Height Correction data.
拼展
展后的高度校正数据数超了上限。
Ea12413 Block Distribution 拼展
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 161 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
The Block Offset Distribute is performed.
The following information may be changed.
- Board information.
- Offset information.
- Local Fiducial information.
- Local Badmark information.
- Dot Dispense information.
- Mount information.
Is it all right?
行拼展。
下列信息可能已更改。
-基板信息
-位移信息
-局部基准信息
-局部坏板信息
-正式点胶信息
-装信息
确行?
Ea12414 Checking Pin... 正在．．．
Ea12415 Teaching Pin... 正在示教．．．
Ea12416 Invalid characters are used for the file name.
A file name may contain max.20 alphanumeric characters (half size) and underbars.
文件名中使用了无效的字符。
有效的文件名只能用 20 个字符以内的半角英数及下划。
Ea12417 Failed to Reset the laser zero position.
( RESULT %6.3f mm )
激光位零点位已失。
( 定果 %6.3f mm )
Ea12418 Measuring the height of dot-station... 正在量打点站高度．．．
Ea12419 Failed to measure the height of dot-station. 量打点站高度已失。
Ea12420 Successfully finished measuring the height of dot-station. 量打点站高度已成功。
Ea12422 Failed to paste data.
The maximum number of lines would be exceeded.
数据的粘失了
粘数据超了最大行数。
Ea12424 Board ID
Since it differs from the ASSY-article watch under present production,
it cannot supply.
基板 ID
因与当前正在生中的 ASSY 号不一致，所以无法投入。
Ea12425 Board ID
Board ID information is removed.
Is it all right?
基板 ID
将消除基板 ID 信息。
确行?
Ea12427 KANBAN plan
The following KANBAN QR information was read
ASSY-article-number:%1
Creation time:%2
Board width:%3
Does it plan from this information?
条板切
已入下列条板 QR 信息。
ASSY 号:%1
生成:%2
P 板度:%3
以此信息行生品切?
Ea12428 AUTO RUNNING
All assignment checks were set to OK.
Do you execute Auto. running?
自运行
生准已全部 OK。
可以始自运行?
Ea12429 ASSIGNMENT CHECK UN-COMPLETION
The plan check of %s is not completed.
Please check a confirm a assignment check.
Please check a assignment.
送料器安装位置未完
%s 的送料器安装位置没有完成。
确送料器安装位置。
Ea12430 PARTS DUMP AND RESET
Some heads may still have parts.
Dump parts during reset?
[OK] Reset and dump parts
[Cancel] Abort
* Parts can be discarded and reset in the position of
the head present by SHIFT+[OK].
(Be careful of the position from which parts fall.)
元件的弃与位
可能正吸附着元件。
弃元件后，行位?
如装位置有正在装的基板存在，
松固定基板，生程序入初始状。
注意，如在此状始自运行，
装位置中的基板不装，
而是出。
[OK] 行弃作后位。
[取消] 不行位。
* 使用 SHIFT+[OK]可以在当前的装位置弃元件
并行位。(注意元件落下的位置。)
Ea12434 INITIALIZE WAFER COUNTER
Do you want to initialize Wafer counter of selected part?
晶片数初始化
初始化所元件的晶片数。
确行?
Ea12436 Renumber Error
Data must be sorted by ""No."" to renumber it.
重新号警告
在 No.以外排序和以 No.行降序排序，
无法行重新号。
Ea12439 Mask Inspection Result Save
Saving the mask inspection result...
网板果保存
正在保存网板果．．．
Ea12440 Mask Inspection Image Save
Saving the mask inspection image...
网板 NG 像保存
正在保存网板 NG 像．．．
Ea12441 Do you want to save the MIS by Board data? 各基板履数据保存
保存各基板履数据。
确保存?
Ea12442 MIS by Board data will be saved now. 正在保存各基板的履数据。
Ea12443 MIS by Board data is saved. 已保存各基板履数据。
Ea12444 Failed to save the MIS by Board data.
Path
Server Path
各基板履数据的保存失了。
路径
服器路径
Ea12445 Failed to load the MIS by Board data.
Path
各基板履数据的入失了。
路径
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 162 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea12446 Language was changed by machine setup.
This requires a language change of the computer OS.
You must reboot to change the language.
Do you want to continue?
在机器置中，言已被更改。
有必要切 OS 的言境。
重新启算机。
您确定?
Ea12447 Language was changed by machine setup.
This requires a language change of the computer OS.
Language change processing is started.
If an [Regional and Language Options] dialog is displayed,
please change into [%s] [Language for non-Unicode programs]
of a [Advanced] tab and check the setting check box of
[a fixed user account].
Do you want to continue?
在机器置中，言已被更改。
有必要切 OS 的言境。
移至言切理。
示[地区和言]框后，将[置]卡
的[不 Unicode 的程序言] 更改[%s]，并中[既定
用号]的框。
您确定?
Ea12448 Block Distribution Error
Offset data "Exec" are not valid.
拼展
位移数据中不存在"行"的数据。
Ea12449 Block Distribution Error
Offset data "Note" exists.
拼展
位移数据中存在"参考"的数据。
Ea12450 Block Distribution Error
Block Fiducial is "Note"
拼展
拼基准"参考"。
Ea12451 Block Distribution Error
Block Badmark is "Note"
拼展
拼坏板"参考"。
Ea12452 Block Distribution Error
Mount data "Note" exists.
拼展
装数据中存在"参考"的数据。
Ea12453 Block Distribution Error
Mount data or Dot Dispense data "Exec" are not valid.
拼展
装数据或正式点胶数据中不存在"行"的数据。
Ea12454 Block Distribution Error
Local Fiducial data "Note" exists.
拼展
局部基准中存在"参考"的数据。
Ea12455 Block Distribution Error
Local Badmark data "Note" exists.
拼展
局部坏板中存在"参考"的数据。
Ea12456 <<WARNING>>Block Distribution Return
Now going to convert the data
from "Note" to "Exec" in Mount, Block repeat,
Local fiducial and Local badmark.
"Exec" data will be deleted.
Do you want to continue ?
<<警告>>拼展原
将下列位移数据的"参考"数据"行"。
装数据、正式点胶数据、
拼基准、拼坏板、
局部基准、局部坏板。
注意，至今止所的"行"数据将被除。
原始数据将消失。您确定?
Ea12457 Block Distribution Return Error
Offset data "Note" are not valid.
拼展原
位移数据中不存在"参考"的数据。
Ea12458 Block Distribution Return Error
Mount data or Dot Dispense data "Note" are not valid.
拼展原
装数据、或正式点胶数据中不存在"参考"的数据。
Ea12459 CREATE FOLDER
Target folder does not exist.
Do you want to create folder ?
文件确
制目的位置没有文件。
建文件?
Ea12460 Board data was changed.
Do you want to save changes?
If you want to perform a language change with saving the Board data
please press "Yes" button.
If you want to perform a language change without saving the Board data,
please press "No" button.
If you want to interrupt processing, please press a "Cancel" button.
When processing is interrupted, in order to change language,
please change language of machine setup again.
基板程序已更改。
保存?
保存基板程序后，行言切，按"是"按。
不保存基板程序，行言切，按"否"按。
中断理，按"取消"按。
已中断了理，再次更改言，在机器置里
更改言。
Ea12461 BOARD DATA CHANGE
Board data is changed.
It can not be saved by the current operator level.
All changes will be lost.
If you want to perform a language change, please press "OK" button.
If you want to interrupt processing, please press "Cancel" button.
When processing is interrupted, in order to change language,
please change language of machine setup again.
正在更改基板程序
基板程序已更改。
因操作的置不同，不能行保存。
行言切，按"是"按。
中断理，按"取消"按。
如已中断理，需重新更改言，在机器置里
更改言。
Ea12462 Pin Number Assign Error
The identification of 1 pin is wrong.
号分配
1 的指定不正确。
Ea12463 Pin Number Assign Error
The pin number exceeded a maximum.
号分配
已超号的最大。
Ea12464 Pin Number Assign Error
The ball number exceeded a maximum.
号分配
已超球引脚号的最大。
Ea12465 Pin Number Assign Error
The pitch of neighboring object data is different.
号分配
相象数据的距不同。
Ea12466 This YGX board data was not created for this machine.
Do you want to continue reading?
并非此机器用 YGX 基板程序。
入?
Ea12467 CONFIRMATION
The machine will be RESET, axes will be moved.
Please ensure safety.
安全确
行位理。
将移，确安全。