YAMAHA 报警资料.pdf - 第198页
Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 198 / 237 Copyright (C) 2009 Y amaha Motor Co.,Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 197 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea16208 File Read Error
It is failed to read the setting of "PartsNameTbl" file.
Please select that file at the option setting.
文件入
未元件/形状表文件的置。
由置指定文件。
Ea16209 Database Matching by Shape Name
Because the corresponding shape name had not been set, the following parts were
not
able to be matched.
Other parts were normally matched.
%s
The part name that was not able to be matched was listed in the following file.
Please set the shape name to these parts.
%s
Do you want to open this log file?
各形状数据匹配
因下列元件没有置与其的形状名，所以未能完成匹配。
其他的元件，均已正常行了匹配。
%s
于未能匹配的元件名，已列表在以下文件中了。
些元件，分配形状名。
%s
打日志文件?
Ea16210 Database Matching by Shape Name
Because the corresponding shape name had not been set, the following parts were
not
able to be matched.
Other parts were normally matched.
%s
It failed in writing in the following file though it tried to list the part name that
was not able to be matched.
If you want to save this log file, please close it before database matching is executed.
%s
各形状数据匹配
因下列元件没有置与其的形状名，所以未能完成匹配。
其他的元件，均已正常行了匹配。
%s
另外，将未匹配的元件名向以下文件列表写入失了。
如日志文件已打，先将其，然后在行匹配。
%s
Ea16211 Database Matching from board by Shape Name
Because the corresponding shape name had not been set, the following parts were
not
able to be matched.
Other parts were normally matched.
%s
The part name that was not able to be matched was listed in the following file.
Please set the shape name to these parts.
%s
Do you want to open this log file?
各形状数据逆匹配
因下列元件没有置与其的形状名，所以未能完成匹配。
其他的元件，均已正常行了匹配。
%s
另外，向下列文件中列表写入未匹配元件名失了。
些元件，分配形状名。
%s
打日志文件?
Ea16212 Database Matching from board by Shape Name
Because the corresponding shape name had not been set, the following parts were
not
able to be matched.
Other parts were normally matched.
%s
It failed in writing in the following file though it tried to list the part name that
was not able to be matched.
If you want to save this log file, please close it before database matching is executed.
%s
各形状数据逆匹配
因下列元件没有置与其的形状名，所以未能完成匹配。
其他的元件，均已正常行了匹配。
%s
另外，向下列文件中列表写入未匹配元件名失了。
如日志文件已打，先将其，然后在行匹配。
%s
Ea16213 DATABASE ERROR
The shape name that corresponds to the following parts name isn't exist.
Parts Name %s
数据信息
未指定元件的形状名。
元件名 %s
Ea16214 DATABASE ERROR
In Parts-DATABASE, the data that corresponds to the shape name isn't exist.
Shape Name %s
数据信息
元件数据中不存在形状名数据。
形状名 %s
Ea16215 Database Output
It is under processing..
数据出
正在理..
Ea16216 The mount data that became invalid exists.
Do you wish to delete the invalid mount data?
The deleted lines will be removed, remaining lines will be sorted.
The filter is canceled of mount data.
存在已无效的装信息。
要除?
(解除装信息的状。)
Ea16217 It ends without updating the Parts/Shape data table.
Is it all right?
不更新元件/形状表就。
您确定?
Ea16218 Refresh the data by reloading?
The data already edit will be lost.
可以重新入?
所的内容将失去。
Ea16219 The source data was not set by latest date,
database reverse set was canceled.
因不是最新日期的数据，
所以没有行逆置。
Ea16220 Failure in parts group numbering
Interference may have failed with constraints of already defined parts group number.
If the constraints are not necessary, please try again after set all parts group number
to 0.
元件号的自置已失。
所入的元件号与干的果有相矛盾之。
将所有元件号原 0 后，重新置。
Ea16221 The sequence data that became invalid exists.
Do you wish to delete the invalid sequence data?
The deleted lines will be removed, remaining lines will be sorted.
The filter is canceled of sequence data.
存在已无效的作流程信息。
要除?
(作流程信息的功能将解除。)T
Ea16222 There are parts that are not linked shape name. 有找不到形状名称的元件存在。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 198 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
%d kind(s) of parts not linked to shape name are found.
Do you want to register shape name that link to these part(s)?
有 %d 元件找不到的形状名称。
使些元件与形状名称接，可以行登?
Ea16223 There is database not existing the shape name that you choose.
In some database, the shape name that you choose are not found
over database No.1000.
Under this condition, when you do shape database treatment,
it might be fail according to the machine.
The corresponded database is as follow.
%s
Do you link this shape name to the part?
*)To solve this problem
After you link this shape name to the part,
make the database record that have shape name you chosen over database No.1000.
数据中不存在指定形状名称。
1001 号以后的数据中找不到您所指定的形状名称。
如在此状行各形状 DB 的操作，有些机器会因找不到的数据而失。
的数据，如下所示。
%s
可以将形状名称与元件接?
*)形状名称与元件接后，会在数据的 1001 号以后生成持有所指定的
形状名称的数据，因此可以得到解决。
Ea16224 Finished the shape name selection
The shape name selection is finished.
Is it all right?
The shape name linked before is kept linking.
止形状名称的
可以止形状名称的?
在此以前接的形状名称仍然保持接系。
Ea16225 Shape name is linked to parts
If you want to apply these links, please execute such database treatment again.
元件与形状名称已接。
如不需要适用接系，重新行数据操作。
Ea16226 Open database editor
This database record will be opened by the database editor.
%s
When you add/edit/delete data at the database editor,
select [Refresh] button to apply edit result to [Database Overview].
打数据器
从数据器打下列数据。
%s
如在数据器上数据行了添加/更改/除，
可以通按［更新至最新状］按，使果反映至数据列表。
Ea16227 YVi data was outputted.
YVi 程序的出已完成。
Ea16229 This file already exists.
Do you want to overwrite ?
已存在文件名。
如要除同名的文件并理，"是"。
如要中断理，"否"。
Ea16232 No Multi Stick Feeders are defined
Do you want to define them now?
多杆式送料器未定。
可以从在始定?
Ea16233 Do you want to save the changes you made
to the multi-stick feeder definition?
多杆式送料器的定已更改。
需要保存?
Ea16234 Not all components could be loaded. 不能入全部元件的数据。
Ea16235 Components previously assigned
to this feeder will be unassigned.
Continue deleting this feeder?
此送料器、已存在元件。
除此送料器上存在的元件?
Ea16236 Components previously assigned
to this lane will be unassigned.
Continue deleting this lane?
此供料道已存在元件。
除此供料道的元件?
Ea16237 Components assigned to this feeder
will be unassigned.
Continue changing Feeder Id?
此送料器已存在元件。
更送料器的 ID ?
Ea16238 Components assigned to this feeder
will be unassigned.
Continue deleting this Feeder?
此送料器已存在元件。
除此送料器的定?
Ea16239 File %s could not be opened. 未能打%s 文件。
Ea16240 File %s could not be created. 未能建%s 文件。
Ea16241 Error file %s.
Please correct the file data.
If needed delete the file a default new one will be created.
%s 文件有。
修改此文件。
如果除文件、将生成新建文件。
Ea16242 <<not used>> 不使用
Ea16243 No feeder SetNo left to assign additional components. 添加的元件、没有送料器安装位置
Ea16244 Bug in Automatic Lane Assignment:
Component assigned to Machine not in list of possible Machines.
Contact your local site representative.
自供料道分配功能
将元件充到可以分配的片机后、元件分配失。
Ea16245 Error loading Feeder Information for %s feeders.
Please check feeder information with the PCB Explorer.
取得有%s 送料器的信息已失。
确送料器置。
Ea16246 Please select only one part for assignment to a lane. 供料道分配元件。
Ea16247 It failed in the output of the inspection machine data.
It is outside the parameter range.
Machine
File Name
Mount Info
Error Detail
Error Code
机数据出失。
是参数的范外。
主机信息:
文件名称:
装信息:
:
Ea16248 Please make the PCB name within 20 characters.
PCB Name
保存的基板名称是 20 文字以内。
保存基板名称:
Ea16249 It failed in the output of the inspection machine data.
It is a file writing error.
机数据出失。
文件写入。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 199 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
File Name
Error Code
文件名称:
Ea16250 It failed in the output of the inspection machine data.
The folder cannot be made.
File Name
Folder Name
Error Code
机数据出失。
不能建文件。
文件名称 :
文件名称:
Ea16251 It failed in the output of the inspection machine data.
It is memory shortage.
File Name
Error Code
机数据出失。
内存不足。
文件名称:
Ea16252 It failed in the output of the inspection machine data.
There are a lot of numbers of mount parts.
The number of steps exceeded it.
File Name
Error Code
机数据出失。
装信息数多。
象数超。
文件名称:
Ea16253 Application internal error!
Required KFileLib6 not found.
用程序内部!
找不到 KFileLib6 。
Ea16255 It failed in the output of the inspection machine data.
The number of blocks exceeded it.
File Name
Error Code
机数据的出失了。
野数超出了。
文件名
号
Ea16256 It failed in the output of the inspection machine data.
The correspondence of the note data is not taken.
Or, the note data is not found.
Machine
File Name
机数据的出失了。
参考数据无法取得一致。
或无法找到参考数据。
机器信息
文件名
Ea16257 It failed in the machine data assigned to the inspection object.
The correspondence of the note data is not taken.
Or, the note data is not found.
Machine %s
从片机投入名称失了。
参考数据无法取得一致。
或无法找到参考数据。
机器信息 %s
Ea16262 Invalid production condition
All settings are "-1:Obey setting in board data".
Set some valid production conditions to change.
In case all of it obeying in board data, this operation is not necessary.
置的生条件全部-1。
-1，表示使用既存的条件行生。
所以，全部都-1，即使通信也不会生任何化。
Ea16266 It failed in the Move Parts.
Please do not save the board data,
because there is a possibility that the mismatch
of the board data has been generated.
Try to do re-reading of board data,
and to edit it again.
机器的移失了。
可能基板程序不一致，不要保存基板程序。
重新入基板程序并重新。
Ea16500 Failed. 已失。
Ea16501 Cancel. 已取消。
Ea16502 Process is aborted, because of an abort order. 根据中断指令已中断理。
Ea16503 Internal error 内部。
Ea16504 Failed to read file. 文件的入已失。
Ea16505 Failed to write file. 文件的出已失。
Ea16506 File name is not specified. 文件名未定。
Ea16507 File is not found. 没有找到文件。
Ea16508 XML File Format Error.
End tags are too many.
Tag is mismatched.
XML 文件格式。
束 Tag 多.
始 Tag 和束 Tag 的数量不一致。
Ea16509 XML File Format Error.
'>' is not found.
XML 文件格式
没有找到 '>'。
Ea16510 XML File Format Error.
Tag name is not found.
Tag is "<>".
XML 文件格式
没找到 Tag 名。
目前 "<>"。
Ea16511 XML File Format Error.
Tag mismatch.
XML 文件格式
始 Tag 和束 Tag 的数量不一
Ea16512 XML File Format Error.
Attribute is not found.
XML 文件格式
没有找到属性。
Ea16513 XML File Format Error.
Attribute value is not found.
XML 文件格式
没有找到属性的。
Ea16514 Format is invalid. 格式无效。
Ea16515 Write format is invalid. 写出格式无效。
Ea16516 Not enough memory. 内存不足。
Ea16517 Unknown tag is found. 了未知 Tag。
Ea16518 Unknown attribute is found. 了未知属性。
Ea16519 XML File Format Error.
Illegal attribute is found.
XML 文件格式
了不正常的属性。