YAMAHA 报警资料.pdf - 第192页

Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 192 / 237 Copyright (C) 2009 Y amaha Motor Co.,Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…

100%1 / 237
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 191 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
when they are sorted by "No.".
Ea16048 Data can be saved to a Line folder only. 只能保存到生󱮔的文件中。
Ea16049 Could not move parts.
The maximum number of data(%d) is exceeded.
未能󲲰行机器󳋉移。
将超出全部数据的最大数(%d)。
Ea16050 File Read Error
Failed to read Mount Data.
The maximum number of data(%d) is exceeded.
文件󲣐入󳇮󲣄
󲨉装信息的󲣐入已失󲧺。
超󲲜󲣐入可能的最大数(%d)
Ea16051 File Read Error
Failed to read Dot Dispense Data.
The maximum number of data(%d) is exceeded.
文件󲣐入󳇮󲣄
正式点胶信息的󲣐入已失󲧺。
超󲲜󲣐入可能的最大数(%d)
Ea16052 File Read Error
Failed to read Parts Data.
The maximum number of data(%d) is exceeded.
文件󲣐入󳇮󲣄
元件信息的󲣐入已失󲧺。
超󲲜󲣐入可能的最大数(%d)
Ea16053 File Write Error
Failed to write Parts Data.
The maximum number of data(%d) is exceeded.
文件写入󳇮󲣄
元件信息的写入已失󲧺。
超󲲜写入可能的最大数(%d)
Ea16054 SET FROM DATABASE ALL
Executing Set from database all...
数据的全󲢓置
正在行数据的全󲢓置...
Ea16055 Block Distribute
Executing block distribution...
拼位移展
正在行拼位移展...
Ea16056 Block Distribute Return
Executing block distribute return...
拼位移󲲭原
正在行拼位移󲲭原...
Ea16057 BOARD DATA SAVE
Common Data Check Error.
Do you wish to save it as it is?
基板程序保存
通用程序󰖕󰒺󰋋生了󳇮󲣄。
󱮼󱯂保存?
Ea16058 DotDispense Distribution
Bond distribute work was finished normally.
正式点胶展
粘󱮨展作已正常󱮨束。
Ea16059 DotDispense Distribution
Failed to execute Bond Distribution.
正式点胶展
粘󱮨展作失󲧺了。
Ea16060 DotDispense Distribution
Acquisition of a parameter went wrong.
正式点胶展
参数的取得已失󲧺。
Ea16061 DotDispense Distribution
Failed to get the data of an edit domain.
正式点胶展
未能取到󱯫󲱦󳕛域的数据。
Ea16062 DotDispense Distribution
The DotDispense data after distribution will exceed the maximum number (%d).
正式点胶展
展后点胶数据将超󲲜最大数(%d)。
Ea16063 DotDispense Distribution
Acquisition of data required for deployment went wrong.
正式点胶展
取得展所必需的数据失󲧺了。
Ea16064 DotDispense Distribution
A head was not decided.
Machine name
Part number No.
Part name
正式点胶展
未能决定 head.
机器名称
元件号󱓖
元件名称
Ea16065 DotDispense Distribution
Solder distribute work was finished normally.
正式点胶展
󳇶膏展作已正常󱮨束了。
Ea16066 DotDispense Distribution
Failed to execute solder distribution.
正式点胶展
󳇶膏展作失󲧺了。
Ea16067 DotDispense Distribution
This form information is not supported.
正式点胶展
不支持此形状信息。
Ea16068 Select Show
The same display order is registered.
󰌓示󲢓置
登了相同的󰌓示󳕏序。
Ea16069 Print Inspection View.
If the data of Inspection View is deleted,
it matches no longer with the View No. data
of Inspection Object of examination.
Do you wish to continue?
印刷󰖕󰒺󲚛野
如除印刷󰖕󰒺󲚛野的数据，与印刷󰖕󰒺󲚛野的󲚛野 No.
数据不一致。
确除?
Ea16070 Move predispense
Failed to insert predispense data to machine %d
due to invalid predispence data.
Do you wish to skip invalid predispense data ?
机器󳋉移
不能在移目的地机器 %d 中生成予点胶信息的空白行。
是否将无效的予点胶信息跳󲲜并移?
Ea16071 Move predispense
For Machine %d PreDispense Data No %d
the Mark number will be reset to 0 (was %d).
Are you sure ?
机器󳋉移
于移的机器 %d 的予点胶信息 %d 号，
将󰓜󲢅号󱓖的󲢓置从%d 返回到 0。
󲣌再󲢓置󰓜󲢅。
确要更?
Ea16072 Failed to paste data.
Paste data is line data.
数据的粘󲨉已失󲧺。
粘󲨉的数据生󱮔数据。
Ea16073 Set number has been completed.
Database No.
已󲲰行了号󱓖的󲢓置。
数据号󱓖 号
Ea16074 Set from Parts-DATABASE has been completed.
Database No.
已󲲰行了元件数据󲢓置。
数据号󱓖 号
Ea16075 A number set is done to more than one part data.
[Database]
向数个元件信息󲲰行号󱓖󲢓置。
[数据]
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 192 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
DB No. %d: %s
[Parts]
%s
Do you want to continue?
DB No. %d: %s
[元件数据]
%s
确要行?
Ea16076 Set from Parts-DATABASE is done to more than one part data.
[Database]
DB No. %d: %s
[Parts]
%s
Do you want to continue?
向数个元件信息󲲰行元件数据信息󲢓置。
[数据]
DB No. %d: %s
[元件数据]
%s
确要行?
Ea16077 Set number has been completed.
Database No.
已行了号󱓖󲢓置。
数据号󱓖 号
Ea16078 Set from Mark-DATABASE has been completed.
Database No.
已行了󰓜󲢅数据信息的󲢓置。
数据号󱓖 号
Ea16079 A number set is done to more than one mark data.
[Database]
DB No. %d: %s
[Mark]
%s
Do you want to continue?
向数个󰓜󲢅信息󲲰行号󱓖󲢓置。
[数据]
DB No. %d: %s
[󰓜󲢅]
%s
确要行?
Ea16080 Set from Mark-DATABASE is done to more than one mark data.
[Database]
DB No. %d: %s
[Mark]
%s
Do you want to continue?
向数个󰓜󲢅信息󲲰行󰓜󲢅数据信息󲢓置。
[数据]
DB No. %d: %s
[󰓜󲢅]
%s
确要行?
Ea16081 DotDispense Distribution
The interference check went wrong.
点胶展
干󰖕󰒺已失󲧺。
Ea16082 DotDispense Distribution
A nozzle type is not decided or a head number is inaccurate.
点胶展
吸嘴󱥐型未决定、或 Head 号󱓖不正确。
Ea16083 DotDispense Distribution
The interference check result is already opened.
Please perform after closing.
点胶展
干󰖕󰒺的󱮨果已󱮤打。
󲣌在󳋂后行。
Ea16084 DotDispense Distribution
Dispense sorting was finished normally.
点胶展
已正常󱮨束点胶排序。
Ea16085 DotDispense Distribution
Failed to sort.
点胶展
点胶排序已失󲧺。
Ea16086 DotDispense Distribution
Dispenser doesn't exist.
点胶展
点胶装置不存在。
Ea16087 DotDispense Distribution
A head number isn't correct.
Machine name
DotDispense number
DotDispense name
正式点胶展
正式点胶信息的 Head 号󱓖不正确。
机器名称
正式点胶号󱓖 号
正式点胶名称
Ea16088 DotDispense Distribution
Dispense data from different heads may be interfering.
Dispense sorting was finished,
but may contain data that stopper interferes with other dispense data.
正式点胶展
持有相异 Head 的点胶数据之󳋉互相干。
中断点胶排序。
󲣌确󲡹板是否干涂完的粘󱮨的数据。
Ea16089 DotDispense Distribution
Dispense sorting was interrupted by a time-out error.
Dispense sorting was finished,
but may contain data that stopper interferes with other dispense data.
Please check the following:
*Illegal Diameter, Stopper and Pitch data of the nozzle spec.
正式点胶展
因超󰋋，点胶排序已被中断。
此数据，可能造成板干涂好的粘󱮨。
可能因下列原因所致:
·吸嘴󲚙格信息的[直径]、[板]、[󳋉距]的󲢓置不适当。
·存在板干涂好的粘󱮨的数据。
Ea16090 DotDispense Distribution
Failed to check interference.
正式点胶展
点胶干󰖕󰒺已失󲧺。
Ea16091 DotDispense Distribution
Acquisition of data required for sorting went wrong.
正式点胶展
排序所必需的数据的取得已失󲧺。
Ea16092 DotDispense Distribution
There is no dot dispense information.
正式点胶展
没有正式点胶信息。
Ea16093 DotDispense Distribution
Dispense head sorting was finished normally.
正式点胶展
已正常󱮨束各 Head 的点胶排序。
Ea16094 DotDispense Distribution
Failed to execute Head sorting.
正式点胶展
各 Head 的点胶排序失󲧺了。
Ea16095 DotDispense Distribution
Dispense all work was finished normally.
正式点胶展
已正常󱮨束括理。
Ea16096 Starting Board Editor
One set is not registered for the machine on the line, either.
基板󱯫󲱦器启
生󱮔上未登任何一台机器。
Ea16097 Fix Component Registration
Parts do not exist in the selected position. Please choose part data.
固定元件登
所󲳞位置上没有元件。󲣌󲳞元件数据。
Ea16098 Fix Component Registration
The specified fixed component number is already used. Does it overwrite?
固定元件登
指定的固定元件号󱓖已󱮤存在。覆盖保存?
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 193 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea16099 Fix Component Registration
Reading of a fixed component file went wrong.
固定元件登
固定元件文件的󲣐入失󲧺了。
Ea16100 Fix Component Registration
Writing of a fixed component file went wrong.
固定元件登
固定元件文件的写入失󲧺了。
Ea16101 Fix Component Registration
Fixed component registration was performed.
固定元件登
固定元件登完󰢪了。
Ea16102 Fix Component Registration
Fixed part registration went wrong.
固定元件登
固定元件的登失󲧺了。
Ea16103 Calibration
An illegal value was entered.
Input value is cancelled.
󰓜准
󲱨入了非法数。
将放弃󲱨入。
Ea16104 Fix Component Matching
Fixed component matching was performed.
固定元件匹配
固定元件匹配已行完󰢪。
Ea16105 Data on this machine does not exist for the chosen Board
Do you choose data on other machines, and do compulsory reading?
所󲳞基板中，不存在󲢺机器数据。
󲳞其他机器的数据，并制󲣐入?
Ea16106 Data on this machine does not exist for the chosen Board
Do you replace the machine which did compulsory reading with this machine?
[Yes] Replace the machine
[No] Choose other machines
覆盖保存的基板中，不存在此机器的数据。
是否用󲢺机器替󰀷已制󲣐入的机器?
[是] 置󰀷
[否] 󲳞其他机器
Ea16107 Data on this machine does not exist for the chosen Board
Do you choose other machines, and replace the machine with this machine?
覆盖保存的基板中，不存在此机器的数据。
󲳞其他机器，并将其替󰀷成此机器。
Ea16108 The machine config. of the selected Board doesn't correspond with the machine
config. of this line.
Do you wish to execute compulsory reading as the data on the downstream machine?
所󲳞基板的机器构成与此生󱮔的机器构成不一致。
是否将不一致的机器数据作最下流的机器数据制󲣐入?
Ea16109 The machine config. of the selected Board doesn't correspond with the machine
config. of this line.
Do you wish to execute compulsory reading as the data on the downstream machine?
[Yes] Assigned to downstream machine and read.
[No] Machine is assigned and read.
所󲳞基板的机器构成与此生󱮔的机器构成不一致。
是否将不一致的机器数据作最下流的机器数据制󲣐入?
[是] 作最下流机器数据
[否] 分配机器并󲣐入
Ea16110 Board data of the AutoSetting establishment machine is changed.
Mount and Parts data are moved to the last machine,
and DotDispnese and PreDispense are moved to the first machine.
更改自󲢓置机器的数据
󲨉装信息和元件信息移至最下位机器，
正式点胶信息和󳕙点胶信息将移至上位机器。
Ea16111 Data on a parts No.0 exist in the Mount Info.
Do you wish to change the Mount data into the skip?
󲨉装信息中存在元件号󱓖 0 的数据。
将此󲨉装数据更改跳󲲜?
Ea16112 STATIC COMPONENT ERROR
The specified static parts do not exist.
固定元件参照󳇮󲣄
指定的固定元件不存在。
Ea16113 Enter a Library name. 󲣌󲱨入信息名。
Ea16114 Do you wish to link to Library?
When Library links it, data during editing are lost.
󲲰行信息的󳇓接?
如果󳇓接信息，󱯫󲱦中的数据将消失。
Ea16115 LIBRARY SAVE
The contents of the details information of the
Editor are saved as the common data.
信息保存
在󱯫󲱦器的󲢻󱮛信息中󰌓示的内容将作通用数据󲲰行保存。
Ea16116 LIBRARY SAVE
The contents of the details information of the
Editor are saved as the series data.
信息保存
在󱯫󲱦器的󲢻󱮛信息中󰌓示的内容将作系列数据󲲰行保存。
Ea16117 A search folder isn't found.
Confirm a search folder.
未找到󰒺找地址
󲣌确󲡹󰒺找地址。
Ea16118 Matching Library isn't found. 没有󱂅一致的信息。
Ea16119 Failed to read Matching Table File. 匹配表文件的󲣐入已失󲧺。
Ea16120 BOARD READ ERROR
Failed to link to static parts.
基板󲣐入󳇮󲣄
固定元件的参照已失󲧺。
Ea16121 All Parts Library Matching was completed. 全元件信息匹配已󱮨束。
Ea16122 Failed to execute All Parts Library Matching. 全元件信息匹配已失󲧺。
Ea16123 Parts data to All Parts Library Matching doesn't exist. 不存在全元件信息匹配的元件信息。
Ea16124 All Mark Library Matching was completed. 全󰓜󲢅信息匹配已󱮨束。
Ea16125 Failed to execute All Mark Library Matching. 全󰓜󲢅信息匹配已失󲧺。
Ea16126 Mark data to All Mark Library Matching doesn't exist. 不存在全󰓜󲢅信息匹配的󰓜󲢅信息。
Ea16127 Fix Part Registration
This command is not available for a Parts with positive "FixCmpRef."
固定元件登
固定元件所参照的元件信息不能󲲰行固定元件登。
Ea16128 Library link is cut. 解除信息󳇓接。
Ea16129 Library Link.
When a Library links is made, changed data while editing is lost.
󳇓接信息。
󳇓接信息，󱯫󲱦中的数据将消失。
Ea16130 DATABASE EDIT WARNING
Database is in use by another computer (%1).
It is opened as read only.
(Any changes made will not be saved.)
数据󱯫󲱦 警告
其他󲡶算机(%1)正在使用。
以[只󲣐]方式打数据。
(即使󲲰行保存和逆󲢓置也不能真正被保存。)
Ea16131 About to release database write lock.
(Database write lock file will be deleted.)
Proceed?
󲺟放数据占有󰐘。
(除数据占有󰐘文件)
您确定?
Ea16132 The selected path already exists.
Path is changed to existing path.
存在与当前所󲳞路径一致的路径。
切󰀷到第一个一致的路径。