YAMAHA 报警资料.pdf - 第174页

Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 174 / 237 Copyright (C) 2009 Y amaha Motor Co.,Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…

100%1 / 237
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 173 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Feeder set number [%d] 送料器安装号󱓖 [%d]
Ea12698 Failed to write to the "NOZZLE ID LOG" file.
There are not enough space can be used for it, because this disk
is full.
Please delete or remove some files to keep enough space.
Nozzle ID 履文件󲱨出󳇮󲣄
不能保存 Nozzle ID 履文件。
磁󱎭空󳋉已󰮶。
󲣌增加保存履文件用磁󱎭的空󳋇容量。
Ea12699 Failed to write to the "NOZZLE ID LOG" file.
The attribute of the disk or file may be set as "Read Only".
Please check above.
Nozzle ID 履文件󲱨出󳇮󲣄
不能保存 Nozzle ID 履文件。
󲢺文件是只󲣐文件。
󲣌解除媒体的写保状，
或将要保存的文件的属性更改可写入状。
Ea12700 Failed to write to the "NOZZLE ID LOG" file.
Nozzle ID log file cannot be saved.
It is in the state which cannot be written in.
Please find a cause, and enable it to write.
Nozzle ID 履文件󲱨出󳇮󲣄
不能保存 Nozzle ID 履文件。
目前于不能写入的状。
󲣌󰒺明原因，使其恢至可写入状。
Ea12701 "NOZZLE ID LOG" data reset
Log data is reset. Is it all right?
Reset target [%s]
Reset range [All Data]
Nozzle ID 履数据初始化
可以履数据行初始化?
初始化象 [%s]
初始化范 [全部数据]
Ea12702 "NOZZLE ID LOG" data reset
Log data is reset. Is it all right?
Reset target [%s]
Reset range [Selection line]
ID [%s]
Table Number [%d]
Head Number [%d]
Nozzle Type [%s]
Nozzle station number [%d]
Nozzle ID 履数据初始化
可以履数据行初始化?
初始化象 [%s]
初始化范 [所󲳞行的数据]
ID [%s]
工作台号󱓖 [%d]
󲨉装号󱓖 [%d]
吸嘴󱥐型 [%s]
吸嘴交󰀷站号󱓖 [%d]
Ea12703 "NOZZLE ID LOG" data reset
Log data is reset. Is it all right?
Reset target [%s]
Reset range [Selection line]
ID [%s]
Table Number [%d]
Head Number [%d]
Nozzle Type [%s]
Nozzle ID 履数据初始化
可以履数据行初始化?
初始化象 [%s]
初始化范 [Selection line]
ID [%s]
工作台号󱓖 [%d]
Head 号󱓖 [%d]
Nozzle 󱥐型 [%s]
Ea12704 Failed to access to the "NOZZLE ID LOG" file.
%s
To update information for the file on the server, was failed.
There are some possibility of Network Impediment.
Please make sure the condition for above.
Production can be continued with the following condition.
1. The function "ID Log Management" should be set to "Disable"
in Application Setup.
2. Count for Feeder Driven, Error, etc. are not totaled during
this condition is kept.
Nozzle ID 履文件存取󳇮󲣄
不能更新保存在服器中的各 ID 履信息。
可能生了网󱮱障碍。
%s
网󱮱障碍排除之前，如要󱮼󱯂生，可以通󲲜用󲱄件󲢓置
将 ID 履管理󲢓置「无效」即可。
但，󲢓置「无效」期󳋉，不能合󲡶送料次数和吸料次数等󳕎目。
Ea12705 Failed to access to the "NOZZLE ID LOG" file.
%s
To update information for the file on the external storage, was
failed.There are some possibility of Device Impediment.
Production can be continued with the following condition.
1. The function "ID Log Management" should be set to "Disable"
in Application Setup.
2. Count for Feeder Driven, Error, etc. are not totaled during
this condition is kept.
Nozzle ID 履文件存取󳇮󲣄
不能更新保存在周󲲎机器(外部 HDD、DVD 等)中的各 ID 履信息。
可能是周󲲎机器生了障碍。
障碍排除之前，如要󱮼󱯂生，可以通󲲜用󲱄件󲢓置
将 ID 履管理󲢓置「无效」即可。
但，󲢓置「无效」期󳋉，不能合󲡶送料次数和吸料次数等󳕎目。
%s
Ea12708 Moving an XY axis at a safe position... 正在使主机的 XY 󲱉移至安全位置。
Ea12709 Searching a part on a wafer... 正在󰒺找晶片上的元件...
Ea12710 Moving an LCXY axis at a safe position... 正在使相机移至安全位置。
Ea12712 CHARACTER DATA CONVERT
An illegal character is included in the board data.
An illegal character converted as follows and read data.
[ " ] or [ , ] -> [ ^ ]
space -> [ _ ]
other illegal character -> [ ~ ]
An available character is an alphanumeric character and the following signs.
_!#$%&\'\\+-=@(){}:.`^~*<>?/|;
Please don't save it by overwriting when you don't want to change the board data.
Please remove the check from the following check box when you do not want to
convert an illegal character automatically at of the board data reading.
Software Setting - History - Detail History setting - FullASCII Output
文字数据󲱁󰀷
基板程序含有不正确的文字。
已󲣐入将不正确的文字󲱁󰀷成下列文字的数据、
[ " ] 及 [ , ] -> [ ^ ]
半角空格 -> [ _ ]
全角文字、半角片假名、其他使用禁止文字 -> [ ~ ]
使用可能的文字是、半角英文与以下的󲢅号。
_!#$%&\'\\+-=@(){}:.`^~*<>?/|;
不需要更基板程序󰋋、󲣌不要覆盖保存。
󲣐入基板󰋋不需要自󲱁󰀷不正确的文字󰋋
去掉󲳞框中的󲳞中󰓜󲢅。
用程序󲢓置 - 履 - 履󲢻󱮛󲢓置 - 󰓜准文字代󱓖
Ea12713 CHARACTER DATA WARNING
An illegal character is included in the board data.
There is a possibility that the problem occurs when keeping operating it.
文字数据警告
基板程序含有不正确的文字。
如果󱮼󱯂操作、有可能生󳋃󳕭。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 174 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Please correct it with off-line software such as YGOS.
An available character is an alphanumeric character and the following signs.
_!#$%&\'\\+-=@(){}:.`^~*<>?/|;
Please put the check from the following check box when you do want to
convert an illegal character automatically at of the board data reading.
Software Setting - History - Detail History setting - FullASCII Output
󲣌用 YGOS 等脱机󲱄件修改。
可以使用文字是半角英文、数字和下列的󲢅号。
_!#$%&\'\\+-=@(){}:.`^~*<>?/|;
需要基板程序󲣐取󰋋自󲱁󰀷不正确的文字󰋋、
󲣌󲳞中下面的󲳞框。
用程序󲢓置 - 履 - 履󲢻󱮛󲢓置 - 󰓜准文字代󱓖
Ea12721 Moving an wafer camera... 正在移晶片相机...
Ea12724 VACUUM CHECK
Vacuum Check is executed.
[OK] Vacuum Check is executed.
[CANCEL] Abort.
真空󰖕󰒺确󲡹
行真空󰖕󰒺。
[OK] 行真空󰖕󰒺。
[取消] 取消行、返回原画面。
Ea12725 Checking VacuumCheck... 正在行真空󰖕󰒺作...
Ea12726 May I switch the edit mode to "Simplicity"?
The input parameter is lost when switching from "Details" to "Simplicity".
可以将󱯫󲱦模式切󰀷成"󱡕易"?
如果从"󲢻󱮛" 切󰀷到 "󱡕易"、会失去󲱨入参数。
Ea12734 Failed in the save of the print inspection result 印刷󰖕󰒺󱮨果的保存失󲧺了。
Ea12738 Print inspection result CSV preservation error
It failed in making the folder that preserved print inspection result CSV.
Please confirm the CSV output folder path of the option setting.
印刷󰖕󰒺󱮨果 CSV 保存󳇮󲣄
建保存印刷󰖕󰒺󱮨果 CSV 的文件失󲧺了。
󲣌确󲡹󲳞󳕎󲢓置画面的 CSV 󲱨出文件的路径。
Ea12739 Print inspection image preservation error
It failed in making the folder that preserved the print inspection image.
Please confirm the image output folder path of the option setting.
印刷󰖕󰒺像保存󳇮󲣄
建保存印刷󰖕󰒺像的文件失󲧺了。
󲣌确󲡹󲳞󳕎󲢓置画面的像󲱨出文件的路径。
Ea12741 Board data is modified.
- Block offset point of the board data is different
from the last production.
- Halfway Continue cannot be done.
Is AutoRun begun from the mount of the first point?
[Yes] :AutoRun Execute
[No] :Not Execute
正在更改基板程序
- 基板程序的拼位移数与前次生󰋋不同。
- 无法施从中途始运行。
是否从始运行?
[是] :始自运行。
[否] :不始自运行。
Ea12743 History preservation connection error
Can not find the preservation.
Possible causes are:
1.A network is not connected.
2.The path setting of History is not correct.
3.No access right for writing data.
Preservation :
履的保存地址󳇮󲣄
没有找到指定的保存地址。
有以下几󱚢原因
1.网󱮱没有󲲳接。
2.󲢓定的保存地址不正确。
3.文件不允󲢍写入。
保存地址 :
Ea12744 Image preservation connection error
Can not find the preservation.
Possible causes are:
1.A network is not connected.
2.The path setting of Image is not correct.
3.No access right for writing data.
Preservation :
画像的保存地址󳇮󲣄
没有找到指定的保存地址。
有以下几󱚢原因
1.网󱮱没有󲲳接。
2.󲢓定的保存地址不正确。
3.文件不允󲢍写入。
保存地址 :
Ea12745 History preservation capacity shortage error
There is no more HDD-space for saving History files.
Data can't be saved any more until more diskspace is
made available:
Preservation :
Capacity : KB
履的保存空󳋉不足󳇮󲣄
所指定的保地址已没有足的空󳋉
保存地址 :
剩余空󳋉 : KB
Ea12746 Image preservation capacity shortage error
There is no more HDD-space for saving Image files.
Data can't be saved any more until more diskspace is
made available:
Preservation :
Capacity : KB
画像的保存空󳋉不足󳇮󲣄
所指定的保地址已没有足的空󳋉
保存地址 :
剩余空󳋉 : KB
Ea12747 The preservation of History is not connected 履的保存地址未󲲳接
Ea12748 The preservation of Image is not connected 画像的保存地址未󲲳接
Ea12749 The preservation of History is uninput 履的保存地址未󲢓定
Ea12750 The preservation of Image is uninput 画像的保存地址未󲢓定
Ea12751 History preservation capacity shortage error Warning
There is no more HDD-space for saving History files.
Data can't be saved any more until more diskspace is
made available:
Preservation :
Capacity : KB
履的保存空󳋉不足󳇮󲣄警告
所指定的保地址已没有足的空󳋉
保存地址 :
剩余空󳋉 : KB
Ea12752 Error Clear 󳇮󲣄已清除
Ea12753 Error Stop 󳇮󲣄停止
Ea12754 Emergency stop 非常停止
Ea12755 Stop by defined production amount of boards 因达到󳕙󲡶生数量而停止
Ea12759 The first equipment was not found
The following first equipment file was not found.
Path:
1. Please confirm the connection of the server.
没有找到最前端󲢓
没有找到以下最前端󲢓的文件。
路径:
1. 󲣌确󲡹服器的󲲳接状。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 175 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
2. Please confirm the path setting of this machine.
[Setting]-[Machine Information]-[Option Setting]-[Detail Setting]
[QA Net]-[Output Path]
3. Please confirm the machine setting and the path setting of the
first equipment.
[Setting]-[Machine Information]-[Option Setting]-[Detail Setting]
[QA Net]-[Output Path]
[QA Net]-[First Equipment]
2. 󲣌确󲡹本󲢓的路径󲢓置。
[机器󲢓置]-[机器信息]-[󲳞󳕎󲢓置]-[󲢻󱮛󲢓置]
[QA 网]-[󲱨出路径]
3. 󲣌确󲡹最前端󲢓的机器󲢓置、路径󲢓置。
[机器󲢓置]-[机器信息]-[󲳞󳕎󲢓置]-[󲢻󱮛󲢓置]
[QA 网]-[󲱨出路径]
[QA 网]-[最前端󲢓]
Ea12760 It failed in making and the update of a current file
It failed in making and the update of the following, current file.
Path:
1. Please confirm the connection of the server.
2. Please shut when you open the file directly by the server.
3. Please confirm the file path setting.
[Setting]-[Machine Information]-[Option Setting]-[Detail Setting]
[QA Net]-[Output Path]
当前文件的建、更新失󲧺了。
以下当前文件的建、更新失󲧺了。
路径:
1. 󲣌确󲡹服器的󲲳接状。
2. 如直接在服器打了文件，󲣌󳋂。
3. 󲣌确󲡹文件路径的󲢓置。
[机器󲢓置]-[机器信息]-[󲳞󳕎󲢓置]-[󲢻󱮛󲢓置]
[QA 网]-[󲱨出路径]
Ea12761 It failed in making the folder.
It failed in making the following folder.
Path:
1. Please confirm the connection of the server.
2. Please shut when you open the file directly by the server.
3. Please confirm the file path setting.
[Setting]-[Machine Information]-[Option Setting]-[Detail Setting]
[QA Net]-[Output Path]
文件的建失󲧺了。
以下文件的建失󲧺了。
路径:
1. 󲣌确󲡹服器的󲲳接状。
2. 如直接在服器打了文件，󲣌󳋂。
3. 󲣌确󲡹文件路径的󲢓置。
[机器󲢓置]-[机器信息]-[󲳞󳕎󲢓置]-[󲢻󱮛󲢓置]
[QA 网]-[󲱨出路径]
Ea12762 An ini file was restored. 已修了 ini 文件。
Ea12763 An ini file is damaged. ini 文件被󰀴坏了。
Ea14000 MIS - Error Log - Event Date
Time when an error or an event occurred.
履 1 日志 生󰋋󳋉
󰌓示󳇮󲣄和作事件的生󰋋󳋉。
Ea14001 MIS - Error Log - Program Name
Program name when an error or an event occurred.
履 1 日志 批名
󳇮󲣄、作的󳕎目生󰋋所󲳞的程序名
Ea14002 MIS - Error Log - Program Comment
Program comment when an error or an event occurred.
履 1 日志 批 ID
󳇮󲣄和作事件生󰋋的所󲳞程序的注󲺟
Ea14003 MIS - Error Log - Event Number
Event number for the error/event.
Es: System error
Ea: Program/operation error
履 1 日志 󳇮󲣄/作号󱓖
󳇮󲣄和作的事件号󱓖:
Es: 与系󱮴相的󳇮󲣄
Ea: 与程序和作相的󳇮󲣄
Ea14004 MIS - Error Log - Contents
Title for the error/operation.
履 1 日志 内容
󳇮󲣄和作内容的󰓜󳕭
Ea14005 MIS - Error Log - Details
Detail information for the error/operation
if any.
履 1 日志 󲢻󱮛
󳇮󲣄和作存在󲢻󱮛数据󰋋的内容
Ea14006 MIS - Error Log - Operator Name
Operator name when an error or an event occurred.
履 1 日志 作者
󳇮󲣄和作事件生󰋋登的作担当者姓名
Ea14010 MIS - Board Log - Program Name
Program name (Lot name) to produce boards.
履 1 生 批名
生基板的程序名(批名)
Ea14011 MIS - Board Log - Program Comment
Program comment (Lot ID) to produce boards.
履 1 生 批 ID
生基板的程序的注󲺟(批 ID)
Ea14012 MIS - Board Log - Start Time
Time to start producing boards.
Time to start first production after the board
change, or time to complete carrying out the
previous Board.
履 1 生 生始󰋋󳋉
始生基板的󰋋󳋉
(切󰀷基板后，最初始自运行的󰋋󳋉。或前批基板出
板完成的󰋋󳋉。)
Ea14013 MIS - Board Log - Finish Time
Time to finish producing boards.
Time which carrying out of a board completed,
or reset time.
履 1 生 生完成󰋋󳋉
完成基板生的󰋋󳋉
(基板出完成的󰋋󳋉或完成位的󰋋󳋉)
Ea14014 MIS - Board Log - Board Count Max
Production amount of boards, which was specified
at the time of production completed.
履 1 生 󳕙定枚数
完成󲢺基板生󰋋所指定的󳕙定生枚数
Ea14015 MIS - Board Log - Board Serial No
Board serial number in the lot.
履 1 生 批内󲲳号
󲢺基板批内生的第几枚基板
Ea14016 MIS - Board Log - Finish Flag
0: Production complete.
1: Production incomplete due to reset or other reason.
2: Production complete by "HALFWAY CONITINUE".
履 1 生 完成󰓜志
0: 已完成生。
1: 因中途施位等，未完成生。
2: 由"中途始运行"，完成了生。
Ea14017 MIS - Board Log - Mount CT
Time to produce Board.
Time from a mounting start to the completion
of mounting, except the time which mark
recognition took.
履 1 生 󲨉装 CT(秒)
󲢺基板的󲨉装所用的󰋋󳋉
(从󲨉装始至完成的󰋋󳋉里除去󰓜󲢅󲢛所用󰋋󳋉)
Ea14018 MIS - Board Log - Transfer CT
Time to transfer Board.
履 1 生 送 CT(秒)
送󲢺基板所用󰋋󳋉