YAMAHA 报警资料.pdf - 第178页
Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 178 / 237 Copyright (C) 2009 Y amaha Motor Co.,Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 177 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea14047 MIS - Program Log - Produced Boards
Number of boards, which were completed.
It is updated when Board carrying out is completed.
履 1 批 生枚数(枚)
生束，完成生的基板枚数。
生枚数在基板出束被更新。
(没有完成生的基板不被数。)
Ea14048 MIS - Program Log - Mount CT Max
The longest mounting time of a Board for the lot.
履 1 批 装 CT/枚 MAX
在批基板中，装最的基板的装
Ea14049 MIS - Program Log - Mount CT Min
The shortest mounting time of a Board for the lot.
履 1 批 装 CT/枚 MIN
在批基板中，装最短的基板装
Ea14050 MIS - Program Log - Mount CT Ave
The average mounting time for the lot.
履 1 批 装 CT/枚 AVE
在批基板中，平均装 1 枚基板的所需
Ea14051 MIS - Program Log - Transfer CT Max
The longest transfer time of a Board for the lot.
履 1 批 送 CT/枚 MAX
在批基板中，送最的基板送
Ea14052 MIS - Program Log - Transfer CT Min
The shortest transfer time of a Board for the lot.
履 1 批 送 CT/枚 MIN
在批基板中，送最短的基板送
Ea14053 MIS - Program Log - Transfer CT Ave
The average transfer time for the lot.
履 1 批 送 CT/枚 AVE
在批基板中，1 枚基板的平均送
Ea14054 MIS - Program Log - Standby CT Max
The longest waiting time of a Board for the lot.
履 1 批 待机 CT/枚 MAX
在批基板中，待机最基板所待机的
Ea14055 MIS - Program Log - Standby CT Min
The shortest waiting time of a Board for the lot.
履 1 批 等待 CT/枚 MIN
在批基板中，待机最短基板所待机的
Ea14056 MIS - Program Log - Standby CT Ave
The average waiting time for the lot.
履 1 批 待机 CT/枚 AVE
在批基板中 1 枚基板的平均待机
Ea14057 MIS - Program Log - MarkRec CT Max
The longest mark recognition time of a Board for
the lot.
履 1 批 CT/枚 MAX
在批基板中，最基板
Ea14058 MIS - Program Log - MarkRec CT Min
The shortest mark recognition time of a Board for
the lot.
履 1 批 CT/枚 MIN
在批基板中，最短基板的
Ea14059 MIS - Program Log - MarkRec CT Ave
The average mark recognition time for the lot.
履 1 批量 CT/枚 AVE
在批基板中，平均 1 枚基板的
Ea14060 MIS - Program Log - PickUp Error
Pickup error count including retry during the
lot's production.
In the following case, it counts.
1. When it is detected that a part is not
present before recognition or mounting.
This check is performed only when
vacuum check is set to special check.
2. When it is detected that a part is not picked
at the center of the nozzle at the
time of recognition.
3. When a part can not be detected
at the time of recognition.
4. When "Ea97" error occurred.
履 1 批 吸料出次数
在批基板作中，生吸料的次数(包括重新行)。
以下情况将数。
1. 前或装前，已判断出不能吸附元件。
，只限于吸附·装真空感器置特殊的才行。
2．果没能将元件吸附至吸嘴中心。
3．，没找到象物。
4．生 "Ea97"。
Ea14061 MIS - Program Log - Parts Vision Error
Component recognition error count including
retry during the lot's production.
履 1 批 元件出次数
在批基板作中，生元件的次数
(包括重新行)
Ea14062 MIS - Program Log - Mark Vision Error
Mark recognition error count during the lot's
production. It counts, when the error of
Ea 51-55 or Ea 1394-1398 is displayed during
auto running.
履 1 批 出次数
在批基板作中，生的次数。
如 Ea51～55、Ea1394～1398 中任何一个在自运行
中示，将数。
Ea14063 MIS - Program Log - Transfer Error
Board transfer error count during the lot's
production. It counts, when the error of
Ea70, Ea71, Ea79, Ea80, Ea83, Ea84, or Ea85
is displayed during auto running.
履 1 批 送出次数
在批基板作中，生送的次数。
如 Ea70、Ea71、Ea79、Ea80、Ea83、Ea84、Ea85 中的任何
一个在自运行中示，将数。
Ea14064 MIS - Program Log - Other Error
Other error count during the lot's production.
The number of times which errors other than
pickup error, part recognition error,
mark recognition error and transfer error
occurred.
履 1 批 其他出次数
在批基板作中，生其他的次数。
吸料、元件、、送以外
的生的次数。
Ea14065 MIS - Program Log - Operator Call Time
Time from error to error clear during the lot's
production.
履 1 批 出停止(秒)
在批基板作中，从生到清除之停机的的合
Ea14066 MIS - Program Log - Recovery Time
Time from error clear to restart production
during the lot's production.
履 1 批 出修(秒)
在批基板作中，从清除示到机器重新启之的的合
Ea14067 MIS - Program Log - NG Blocks
Total number of blocks, which is skipped by
badmark detection in the lot.
履 1 批 坏板 NG 数
在批基板中，坏板 NG 的拼个数
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 178 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea14068 MIS - Program Log - Mounted Blocks
Total number of blocks, which is mounted in
the lot.
履 1 批 完成装的拼数
在批基板中，已完成装的全部拼数
Ea14069 MIS - Program Log - Upstream Standby Time
Total time waiting for upstream machine
during the lot's production (starved).
履 1 批 上位待机(秒)
在批基板生中，
因上位机而造成待机状的合
Ea14070 MIS - Program Log - Downstream Standby Time
Total time waiting for the downstream machine
during the lot's production (blocked).
In case that the machine has a Board on the exit,
waiting the downstream machine, but has no Board
to mount due to the upstream machine, it will
be counted as waiting time for the upstream
machine.
In case that the machine has a Board on the exit
and another Board on the work position, it will
be counted as waiting time for the downstream
machine.
履 l 批 下位待机(秒)
在批基板生中，因下位机而造成待机状的合。
出口送上的基板，尽管因下位机而于出板待机状，
只要装位置没有基板，可以接受从上位机入的基板行
装，就上位待机。如出口送和装位置上有基板，
下位待机。
Ea14071 MIS - Program Log - Working Ratio
Ratio(%) =
(Total mounting time + Total mark recognition time
+ Total transfer time) / (Production finish time
- Production start time - Total wait time) * 100
履 1 批 运率(%)
运率是指，批基板中，片机运行与可运行的比率。
运率(%)=(累装+累+累送) / (生完成-
生准束-累待机)*100
Ea14072 MIS - Program Log - Mount Points
Number of components to be mounted on a Board
for the lot.
履 1 批 装数
用批基板的程序完成装的元件数。
切生基板行合。
Ea14073 MIS - Program Log - Parts Consumption
Total number of used components for the lot's
production. The component count for the e.g.
test picking is excluded.
When parts are picked normally, it is counted.
履 1 批 元件消耗数
批基板作中所消耗的元件数量。
算自运行中所消耗的元件数，因吸附等所消耗的
元件不被数。
正常吸附元件，才数。
Ea14074 MIS - Program Log - Coplanarity Error
Coplanarity check error count during the lot's
production.
履 1 批 引脚起出
在批基板作中，生引脚起的次数
Ea14080 Unit Log - Head - Head
Head numbering.
履 2 装 装
示持有的装个数。
Ea14081 Unit Log - Head - Data
Time to start recording the head down action.
履 2 装 始
装下降的始
Ea14082 Unit Log - Head - Down Counter
Number of head down actions.
履 2 装 下降次数
装已下降的次数
Ea14083 Unit Log - Head - Down Error Counter
Number of errors concerning the head down action.
履 2 装 下降出次数
生装未到达下降端等的次数
Ea14084 Unit Log - Head - Error per cent(%)
The ratio of the head down error to the head down count.
履 2 装 出率(%)
装的下降次数/下降次数的比率
Ea14085 Unit Log - Head - Data
Time to start recording the head blow.
履 2 装 始
装排气的始
Ea14086 Unit Log - Head - Blow Counter
Number of head blows.
履 2 装 排气次数
装排气的次数
Ea14087 Unit Log - Head - Blow Error Counter
Number of errors concerning the head blow.
履 2 装 排气出次数
生装排气的次数
Ea14088 Unit Log - Head - Error per cent(%)
The ratio of the head blow error to the head blow count.
履 2 装 出率(%)
装的 排气次数/排气次数 的比率
Ea14089 Unit Log - Head - Data
Time to start recording the head suction.
履 2 装 始
装吸附的始
Ea14090 Unit Log - Head - Pick Counter
Number of head suctions.
履 2 装 吸料次数
装吸料的次数
Ea14091 Unit Log - Head - Pick Error Counter
Number of errors concerning the head suction.
履 2 装 吸料出次数
生装吸料的次数
Ea14092 Unit Log - Head - Error per cent(%)
The ratio of the head pick error to the head pick count.
履 2 装 出率(%)
装的 吸料次数/吸料次数 的比率
Ea14093 Unit Log - Head - Data
Time to start recording the head FNC action.
履 2 装 始
装 FNC 交吸嘴的始
Ea14094 Unit Log - Head - FNC Counter
Number of head FNC actions.
履 2 装 FNC 交次数
装 FNC 交吸嘴的次数
Ea14095 Unit Log - Head - FNC Error Counter
Number of errors concerning the FNC action.
履 2 装 FNC 交出次数
装 FNC 交吸嘴所生的次数
Ea14096 Unit Log - Head - Error per cent(%)
The ratio of the head FNC error to the head FNC count.
履 2 装 出率(%)
装的 FNC 交次数/FNC 交次数 的比率
Ea14097 Unit Log - Head - Data
Time to start recording the head ANC action.
履 2 装 始
装 ANC 交吸嘴的始
Ea14098 Unit Log - Head - ANC Counter
Number of head ANC actions.
履 2 装 ANC 交次数
装 ANC 交吸嘴的次数
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 179 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea14099 Unit Log - Head - ANC Error Counter
Number of errors concerning the ANC action.
履 2 装 ANC 交出次数
装 ANC 交吸嘴所生的次数
Ea14100 Unit Log - Head - Error per cent(%)
The ratio of the head ANC error to the head ANC count.
履 2 装 出率(%)
装的 ANC 交次数/ANC 交次数 的比率
Ea14110 Unit Log - Nozzle - Head
Head numbering.
履 2 吸嘴 装
示持有的装个数
Ea14111 Unit Log - Nozzle - Date
Time to start recording the nozzle suction.
履 2 吸嘴 始
吸嘴吸料的始
Ea14112 Unit Log - Nozzle - Pick Up Counter
Number of nozzle suctions.
履 2 吸嘴 吸料次数
吸嘴吸料的次数
Ea14113 Unit Log - Nozzle - Pick Error Counter
Number of errors concerning the nozzle suction.
履 2 吸嘴 吸料出次数
生吸嘴吸料的次数
Ea14114 Unit Log - Nozzle - Error per cent(%)
The ratio of the nozzle pick error to the nozzle pick count.
履 2 吸嘴 出率(%)
吸嘴的 吸料次数/吸料次数 的比率
Ea14120 Unit Log - Feeder - Set No
Set position numbering.
履 2 送料器安装号
示具的送料器安装个数
Ea14121 Unit Log - Feeder - Data
Time to start recording the feeder action.
履 2 送料器始
送料器的始
Ea14122 Unit Log - Feeder - Feeder Counter
Number of feeder actions.
履 2 送料器送料次数
送料器的次数
Ea14123 Unit Log - Feeder - Pick Error Counter
Number of errors concerning the feeder actions.
履 2 送料器 吸料出次数
生送料器吸料的次数
Ea14124 Unit Log - Feeder - Error per cent(%)
The ratio of the feeder pick error to the feeder pick count.
履 2 送料器出率(%)
送料器的 吸料次数/吸料次数 的比率
Ea14130 Unit Log - Conveyor - Item
Item names concerning the conveyor.
履 2 送装置 目
示送装置的目名
Ea14131 Unit Log - Conveyor - Data
Time to start recording the conveyor action.
履 2 送装置 始
送运行的始
Ea14132 Unit Log - Conveyor - Counter
Number of conveyor actions.
履 2 送装置 作次数
送运行的次数
Ea14133 Unit Log - Conveyor - Error Counter
Number of errors concerning the conveyor actions.
履 2 送装置 作出次数
生送运行的次数
Ea14134 Unit Log - Conveyor - Error per cent(%)
The ratio of the conveyor error to the conveyor action count.
履 2 送装置 出率(%)
送的 运作次数/运作次数 的比率
Ea14140 Unit Log - Parts(Current Data) - P.No
Parts number is displayed.
履 2 元件(当前的数据) 元件号
示元件号
Ea14141 Unit Log - Parts(Current Data) - Part Name
Parts name is displayed.
履 2 元件(当前的数据) 元件名
示元件名
Ea14142 Unit Log - Parts(Current Data) - Pick Error Counter
Pick error count including retry.
In the following case, it counts.
1. When it is detected that a part is not
present before recognition or mounting.
This check is performed only when
vacuum check is set to special check.
2. When it is detected that a part is not picked
at the center of the nozzle at the
time of recognition.
3. When a part can not be detected
at the time of recognition.
4. When "Ea97" error occurred.
履 2 元件(当前的数据) 吸料出次数
元件生的吸料次数。
(包括重新行)
下列情况将数。
1. 前或装前，已判断出没有吸附到元件。
，只有吸附·放真空感器置特殊才行。
2．果没能将元件吸附到吸嘴中心。
3．，没有找到象物。
4．生 "Ea97" 。
Ea14143 Unit Log - Parts(Current Data) - Error per cent(%)
The ratio of the number of
pickup errors / amount of consumption of this part.
履 2 元件(当前的数据) 出率(%)
元件的 吸料次数/消耗量 的比率
Ea14144 Unit Log - Parts(Current Data) - Vision Error Counter
Vision error count including retry.
履 2 元件(当前的数据) 出次数。(包括重新行)
元件的的生次数
Ea14145 Unit Log - Parts(Current Data) - Error per cent(%)
The ratio of the number of
vision errors / amount of consumption of this part.
履 2 元件(当前的数据) 出率(%)
元件的 次数/消耗量 的比率
Ea14146 Unit Log - Parts(Current Data) - No Parts Error Counter
It counts, when a pickup error, a recognition
error, etc. occur continuously with the same
parts and exceeds the retry count setting.
If retry count is set at "2", the No Parts Error counter
will increment with "3" because the error
occurred 3 times consecutively.
履 2 元件(当前的数据) 无元件出次数
元件因没有元件而生的次数。
同一元件生吸料、，超置
的重新行的次数，已出的次数数。
例如，重新行次数置"2"，
3 次生后，出次数以"3"数。
Ea14147 Unit Log - Parts(Current Data) - Error per cent(%)
The ratio of the number of
no parts errors / amount of consumption of this part.
履 2 元件(当前的数据) 出率(%)
元件因 没有元件而生的次数/消耗量 的比率
Ea14148 Unit Log - Parts(Current Data) - Nozzle Error Counter
Nozzle error count including retry.
The number of times a part was picked up
履 2 元件(当前的数据) 吸嘴出次数
元件生吸嘴堵塞的次数。
(包括重新行)