YAMAHA 报警资料.pdf - 第76页

Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 76 / 237 Copyright (C) 2009 Y amaha Motor Co., Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…

100%1 / 237
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 75 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
1. Machine Config : Is NOZZLE CHANGE available for this Machine Type?
2. Machine Config : Is Nozzle Station set to "Exist" ?
3. Machine Data : Is Head Offset set to "Auto Nozzle Change" ?
4. Machine Data : Is Setting of Flying Nozzle Spec correct ?
1． 机器构成 : 机器󱥐型是否可以󲲰行吸嘴交󰀷的机器?
2． 机器构成 : 吸嘴交󰀷站是否"有"?
3． 机器构成 : 󲨉装偏移量的󲨉装󱥐型是否自交󰀷吸嘴?
4． 机器构成 : 󳖳行式吸嘴󲚙格信息是否已正确󲢓置?
Ea02902 NOZZLE CHANGE SETTING ERROR
There is no Nozzle for "Auto Nozzle Change" (ANC).
Please check the following items:
1. Machine Data : Is Setting of Nozzle Station correct ?
吸嘴交󰀷󲢓置󳇮󲣄
󳕙定交󰀷的 ANC 吸嘴没有󲢓置。
󲣌确󲡹以下󳕎目。
1．机器数据 : 吸嘴交󰀷站信息是否已正确󲢓置?
Ea02903 NOZZLE CHANGE SETTING ERROR
There are too many Nozzles for "Auto Nozzle Change" (ANC).
Please make sure the following item:
- Machine Data : Is Setting of Nozzle Station correct ?
吸嘴交󰀷󲢓置󳇮󲣄
󳕙定交󰀷的 ANC 吸嘴󲢓置了多数个。
󲣌确󲡹以下󳕎目。
1． 机器数据 : 吸嘴交󰀷站信息是否已正确󲢓置?
Ea02904 NOZZLE CHANGE SETTING ERROR
There is no Nozzle for "Flying Nozzle Change" (FNC).
Please check the following items:
- Machine Data : Is Setting of Flying Nozzle Spec correct ?
吸嘴交󰀷󲢓置󳇮󲣄
󳕙定交󰀷的 FNC 吸嘴没有󲢓置。
󲣌确󲡹以下的󳕎目。
1．机器数据 : 󳖳行式吸嘴󲚙格信息是否已正确󲢓置?
Ea02905 NOZZLE CHANGE SETTING ERROR
There are too many Nozzles for "Flying Nozzle Change" (FNC).
Please make sure the following item:
- Machine Data : Is Setting of Flying Nozzle Spec correct ?
吸嘴交󰀷󲢓置󳇮󲣄
󳕙定交󰀷的 FNC 吸嘴󲢓置了数个。
󲣌确󲡹以下󳕎目
1． 机器数据 : 󳖳行式吸嘴󲚙格信息是否已正确󲢓置?
Ea02906 NOZZLE CHANGE STATUS ERROR
The specified nozzle on this head is impossible.
Please make sure the following item:
- Status of Nozzle Station.
吸嘴交󰀷状󳇮󲣄
无法确定当前安装的 ANC 吸嘴。
󲣌确󲡹以下󳕎目。
1． 吸嘴交󰀷站的感器状
Ea02907 COMPONENT DATA ERROR
This component has no feeder set number.
Please set feeder set number.
元件数据󳇮󲣄
送料器安装号󱓖没有󲢓置。
󲣌󲢓置送料器安装号󱓖。
Ea02908 DATA ERROR
Required nozzle for this component can not be
attached to this head.
Head No.
Nozzle No.
Please check [COMPONENT DATA] and [HEAD SPEC INFO].
数据󳇮󲣄
󲢺元件所需的吸嘴，指定的󲨉装无法使用。
󲨉装号󱓖 号
吸嘴󱥐型 号
󲣌确󲡹元件数据和󲨉装󲚙格信息。
Ea02909 NOZZLE CHANGE ERROR
Failed to change nozzles.
吸嘴交󰀷󳇮󲣄
吸嘴交󰀷失󲧺了。
Ea02910 SYSTEM BACKUP ERROR
Failed to system-backup.
Note) System backup with USB media.
Please confirm the connection of the following drive.
Drive Connect
Detach the connection of USB once when error occurs
many times.
Retry after it installs afterwards and it waits.
系󱮴份󳇮󲣄
系󱮴份失󲧺了。
注) 使用 USB 存器󲲰行系󱮴份󰋋，
󲣌确󲡹下列󳝆器的󲲳接。
󳝆器 󲲳接
如多次生󳇮󲣄，󲣌取出 USB 存器，
重新插入并稍作等待后重新󲲰行份。
Ea02911 STOPPED SYSTEM BACKUP
System backup was stopped.
系󱮴份中止
已中止了理。
Ea02912 SYSTEM BACKUP ERROR
Failed to reset read-only attribute of the destination file.
Folder
File
Size
Note) System backup with USB media.
Please confirm the connection of the following drive.
Drive Connect
Detach the connection of USB once when error occurs
many times.
Retry after it installs afterwards and it waits.
系󱮴份󳇮󲣄
制目的位置的文件的只󲣐属性的解除失󲧺了。
文件名
文件名
文件大小
注) 使用 USB 存器󲲰行系󱮴份󰋋，
󲣌确󲡹下列󳝆器的󲲳接。
󳝆器 󲲳接
如多次生󳇮󲣄，󲣌取出 USB 存器，
重新插入并稍作等待后重新󲲰行份。
Ea02913 SYSTEM BACKUP ERROR
Failed to make the folder.
Folder
Note) System backup with USB media.
Please confirm the connection of the following drive.
Drive Connect
Detach the connection of USB once when error occurs
many times.
Retry after it installs afterwards and it waits.
系󱮴份󳇮󲣄
文件的生成失󲧺了。
文件名
注) 使用 USB 存器󲲰行系󱮴份󰋋，
󲣌确󲡹下列󳝆器的󲲳接。
󳝆器 󲲳接
如多次生󳇮󲣄，󲣌取出 USB 存器，
重新插入并稍作等待后重新󲲰行份。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 76 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Ea02914 SYSTEM BACKUP ERROR
Failed to copy the file.
Folder
File
Size
Note) System backup with USB media.
Please confirm the connection of the following drive.
Drive Connect
Detach the connection of USB once when error occurs
many times.
Retry after it installs afterwards and it waits.
系󱮴份󳇮󲣄
文件的制失󲧺了。
文件名
文件名
文件大小
注) 使用 USB 存器󲲰行系󱮴份󰋋，
󲣌确󲡹下列󳝆器的󲲳接。
󳝆器 󲲳接
如多次生󳇮󲣄，󲣌取出 USB 存器，
重新插入并稍作等待后重新󲲰行份。
Ea02915 SYSTEM BACKUP ERROR
Failed to compress or expand the folder.
Folder
Note) System backup with USB media.
Please confirm the connection of the following drive.
Drive Connect
Detach the connection of USB once when error occurs
many times.
Retry after it installs afterwards and it waits.
系󱮴份󳇮󲣄
文件的󱯾或解失󲧺了。
文件名
注) 使用 USB 存器󲲰行系󱮴份󰋋，
󲣌确󲡹下列󳝆器的󲲳接。
󳝆器 󲲳接
如多次生󳇮󲣄，󲣌取出 USB 存器，
重新插入并稍作等待后重新󲲰行份。
Ea02916 SYSTEM BACKUP ERROR
Failed to open the file to get size.
Folder
File
Size
Note) System backup with USB media.
Please confirm the connection of the following drive.
Drive Connect
Detach the connection of USB once when error occurs
many times.
Retry after it installs afterwards and it waits.
系󱮴份󳇮󲣄
󲂌取文件大小而打文件的操作失󲧺了。
文件名
文件名
文件大小
注) 使用 USB 存器󲲰行系󱮴份󰋋，
󲣌确󲡹下列󳝆器的󲲳接。
󳝆器 󲲳接
如多次生󳇮󲣄，󲣌取出 USB 存器，
重新插入并稍作等待后重新󲲰行份。
Ea02917 SYSTEM BACKUP ERROR
Failed to get size of the file.
Folder
File
Size
Note) System backup with USB media.
Please confirm the connection of the following drive.
Drive Connect
Detach the connection of USB once when error occurs
many times.
Retry after it installs afterwards and it waits.
系󱮴份󳇮󲣄
󲂌取文件大小的理失󲧺了。
文件名
文件名
文件大小
注) 使用 USB 存器󲲰行系󱮴份󰋋，
󲣌确󲡹下列󳝆器的󲲳接。
󳝆器 󲲳接
如多次生󳇮󲣄，󲣌取出 USB 存器，
重新插入并稍作等待后重新󲲰行份。
Ea02918 SYSTEM BACKUP ERROR
Not found the source file.
Folder
File
Size
Note) System backup with USB media.
Please confirm the connection of the following drive.
Drive Connect
Detach the connection of USB once when error occurs
many times.
Retry after it installs afterwards and it waits.
系󱮴份󳇮󲣄
要制的文件不存在。
文件名
文件名
文件大小
注) 使用 USB 存器󲲰行系󱮴份󰋋，
󲣌确󲡹下列󳝆器的󲲳接。
󳝆器 󲲳接
如多次生󳇮󲣄，󲣌取出 USB 存器，
重新插入并稍作等待后重新󲲰行份。
Ea02919 SYSTEM BACKUP ERROR
No file in the source.
Folder
File
Note) System backup with USB media.
Please confirm the connection of the following drive.
Drive Connect
Detach the connection of USB once when error occurs
many times.
Retry after it installs afterwards and it waits.
系󱮴份󳇮󲣄
与其的文件，在要制之一个也不存在。
文件名
文件名
注) 使用 USB 存器󲲰行系󱮴份󰋋，
󲣌确󲡹下列󳝆器的󲲳接。
󳝆器 󲲳接
如多次生󳇮󲣄，󲣌取出 USB 存器，
重新插入并稍作等待后重新󲲰行份。
Ea02920 SYSTEM BACKUP ERROR
Failed to update file table.
Note) System backup with USB media.
Please confirm the connection of the following drive.
Drive Connect
Detach the connection of USB once when error occurs
many times.
Retry after it installs afterwards and it waits.
系󱮴份󳇮󲣄
文件表的更新失󲧺了。
注) 使用 USB 存器󲲰行系󱮴份󰋋，
󲣌确󲡹下列󳝆器的󲲳接。
󳝆器 󲲳接
如多次生󳇮󲣄，󲣌取出 USB 存器，
重新插入并稍作等待后重新󲲰行份。
Ea02921 SYSTEM BACKUP ERROR
Failed to write file table.
系󱮴份󳇮󲣄
文件表的写入失󲧺了。
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 77 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Note) System backup with USB media.
Please confirm the connection of the following drive.
Drive Connect
Detach the connection of USB once when error occurs
many times.
Retry after it installs afterwards and it waits.
注) 使用 USB 存器󲲰行系󱮴份󰋋，
󲣌确󲡹下列󳝆器的󲲳接。
󳝆器 󲲳接
如多次生󳇮󲣄，󲣌取出 USB 存器，
重新插入并稍作等待后重新󲲰行份。
Ea02922 SYSTEM BACKUP ERROR
Failed to restore with the disk for different machine.
系󱮴份󳇮󲣄
不能用不同机󱚢的系󱮴数据󲲭原。
Ea02924 PICK RATE WARNING ERROR (Parts)
The pick rate per part is worse than the warning value.
吸料率警告󳇮󲣄(各元件)
各元件的吸料率已低于警戒。
Ea02925 PICK RATE WARNING ERROR (Head)
The pick rate per head is worse than the warning value.
吸料率警告󳇮󲣄(各 Head)
各 Head 的吸料率已低于警戒。
Ea02926 FORCE CONTROL TIMEOUT ERROR
Failed to set the target force
before landing.
HEAD
MOUNT/SEQ.
COMPONENT
F.SEQUENCE
󲧴荷控制超󰋋󳇮󲣄
接地作前的目󰓜󲧴荷控制失󲧺了。
Head
󲨉装
元件
作流程
Ea02927 SYSTEM BACKUP WARNING
Failed to copy the Watson log(Application error log)
though the system backup was normally completed.
Please inform to the maker.
Note) System backup with USB media.
Please confirm the connection of the following drive.
Drive Connect
Detach the connection of USB once when error occurs
many times.
Retry after it installs afterwards and it waits.
系󱮴份警告
系󱮴的份已󱮤正常󱮨束，
但󲣘󲢪工具日志(用󲱄件󳇮󲣄日志)的份失󲧺了。
󲣌与制造商󱴩系。
注) 使用 USB 存器󲲰行系󱮴份󰋋，
󲣌确󲡹下列󳝆器的󲲳接。
󳝆器 󲲳接
如多次生󳇮󲣄，󲣌取出 USB 存器，
重新插入并稍作等待后重新󲲰行份。
Ea03102 Please exchange FES system.
RearID
Detected FES system ID is different from
next Board data.
󲣌更改以下料󲰻。
后料󲰻 ID
󰖕出的料󲰻 ID 与在基板程序中所使用的料󲰻不一致。
Ea03103 Please exchange FES system.
FrontID
RearID
Detected FES system ID is different from
next Board data.
󲣌更改下列料󲰻。
前料󲰻 ID
后料󲰻 ID
󰖕出的料󲰻 ID 与在基板程序中所使用的料󲰻不一致。
Ea03210 DATA READ ERROR
Failed to read Multi-Macs data from
Component-DATABASE.
Database No.
Please check
1.Database number for Multi-Macs in Machine Data.
2.Component-DATABASE.
󲣐入数据󳇮󲣄
未能从元件数据󲣐入 Multi-MACS 数据。
元件数据 号
󲣌󰖕󰒺以下󳕎目。
1．机器数据的 Multi-MACS 数据号󱓖
2．元件数据
Ea03211 W-axis interlock stop.
Check Push-Up Pins or Backup Unit.
W 󲱉由󱴩󳇖而停止了运行。
󲣌确󲡹󳕋󳅝或上󳕋装置的位置。
Ea03213 Feeder NormalSig OFF
Partsfeeder can supply parts can not supply parts.
Confirm the power supply condition of partsfeeder.
Confirm the operation condition of partsfeeder.
Normal Signal Not OFF With PartsFeeder.
元件送料器装置异常。
元件送料器没有在可供󱮮元件的状。
󲣌确󲡹元件送料器的󱈊源状。
󲣌确󲡹元件送料器的运行状。
从元件送料器出的装置正常信号不呈 ON 状。
Ea03214 Feeder Not Ready.
The part supply movement of partsfeeder not completed.
Confirm the part supply condition of partsfeeder.
Confirm I/F condition with partsfeeder.
Ready Signal Not All ON With PartsFeeder.
元件送料器准不充分。
用元件送料器的元件供󱮮作没有完成。
󲣌确󲡹送料器的元件供󱮮状。
󲣌确󲡹送料器的 I/F 状。
从送料器出的 Ready 信号不能全部呈 ON 状。
Ea03215 Feeder Not Busy.
partsfeeder doesn't go into the part supply movement.
Confirm the part supply condition of partsfeeder.
Confirm I/F condition with partsfeeder.
Ready Signal Not All OFF With PartsFeeder.
[Error Detail]
元件送料器供󱮮不充分。
元件送料器不能󲲰入元件供作。
󲣌确󲡹元件送料器的元件供状。
󲣌确󲡹与元件送料器的 I/F 状。
从元件送料器出的 Busy 信号不能全部呈 OFF 。
Ea03232 Manual move tray Ready was waited for,
and it became time out.
It considers that there is a problem
in Manual move tray.
因手移托󱎭 Ready 等待而 Timeout。
可能手移托󱎭有󳋃󳕭。