YAMAHA 报警资料.pdf - 第61页

Comparison Table ( English - Chinese ) VGOS V2.46STD R1.000 61 / 237 Copyright (C) 2009 Y amaha Motor Co., Ltd. All Rights Reserved. Code Code Code Code Englis h Englis h Englis h Englis h Chinese Chinese Chinese Chinese…

100%1 / 237
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 60 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Please restart the machine software
after clearing this error.
Ea02516 SERVO HEX ADDRESS ERROR
When reading line %d in HEX file,
Failed to read servo HEX data.
Machine can't be started.
Please restart the machine software
after clearing this error.
伺服 HEX 地址󳇮󲣄
󲣐入伺服 HEX 文件的第 %d 行󰋋失󲧺了。
不能启机器。
󲣌在清除󳇮󲣄警告后，退出用󲱄件。
Ea02517 VISION START ERROR
Vision can't be started.
Please restart the machine software
after clearing this error.
󲚛󲚞启󳇮󲣄
󲚛󲚞的启失󲧺了。
󲣌在清除󳇮󲣄警告后，退出用󲱄件。
Ea02518 VISION INTERFACE INITIALIZATION ERROR
Interface to Vision system failed to initialize.
󲚛󲚞接口初始化󳇮󲣄
󲚛󲚞接口的初始化失󲧺了。
󲣌在清除󳇮󲣄警告后，退出用󲱄件。
Ea02520 APPL BOARD BOOT ERROR
Failed to write command to APPL.
Command-Area couldn't be reset.
Machine can't be started.
Please restart the machine software
after clearing this error.
APPL 卡的引󳇮󲣄
未能向 APPL 卡写入指令。
指令区域没有被初始化。
不能启机器。
󲣌在清除󳇮󲣄警告后，退出用󲱄件。
Ea02521 APPL BOARD COMMAND ERROR
Failed to write srv-command to APPL.
Command-Area couldn't be reset.
Machine can't be started.
Please restart the machine software
after clearing this error.
APPL 卡的指令󳇮󲣄
未能将 SRV 指令写入到 APPL 卡。
指令区域没有被初始化。
不能启机器。
󲣌在清除󳇮󲣄警告后，退出用󲱄件。
Ea02522 APPL BOARD DPRAM WRITE ERROR
Failed to write data to APPL DPRAM.
Aborted to download APPLBOOT,APPLMAIN,IOMAIN-PROG.
Machine can't be started.
Please restart the machine software
after clearing this error.
APPL 卡的 DPRAM 写入󳇮󲣄
向 APPL 卡的 DPRAM 写入失󲧺了。
APPL 引，APPL 主程序，IO 主程序的下󲱒被中止了。
不能启机器。
󲣌在清除󳇮󲣄警告后，退出用󲱄件。
Ea02523 APPL BOARD HANDSHAKE ERROR
Failed to handshake between HOST and APPL.
Aborted to download APPLMAIN,IOMAIN-PROG.
Machine can't be started.
Please restart the machine software
after clearing this error.
与 APPL 卡的信号交󰀷󳇮󲣄
HOST-APPL 卡之󳋉的信号交󰀷失󲧺了。
APPL 主程序，IO 主程序的下󲱒被中止了。
不能启机器。
󲣌在清除󳇮󲣄警告后，退出用󲱄件。
Ea02524 APPL BOARD TRANSFER ERROR(APPL-HEX)
Failed to download the APPL BOARD.
Aborted to download the APPLBOOT-PROG.
Machine can't be started.
Please restart the machine software
after clearing this error.
APPL 卡的引程序(IPL)送󳇮󲣄
APPL 卡的下󲱒失󲧺了。
APPL 引的下󲱒被中止了。
不能启机器。
󲣌在清除󳇮󲣄警告后，退出用󲱄件。
Ea02525 APPL BOARD TRANSFER ERROR(APPL-HEX)
Failed to download the APPL BOARD.
Aborted to download the APPLMAIN-PROG.
Machine can't be started.
Please restart the machine software
after clearing this error.
APPL 卡的主程序(OS)送󳇮󲣄
APPL 卡的下󲱒失󲧺了。
APPL 主程序的下󲱒被中止了。
机器不能启。
󲣌在清除󳇮󲣄警告后，退出用󲱄件。
Ea02526 APPL BOARD TRANSFER ERROR(IO-HEX)
Failed to download the IO BOARD.
Aborted to download the IOMAIN-PROG.
Machine can't be started.
Please restart the machine software
after clearing this error.
APPL 卡的 IO 主程序(IOHEX)送󳇮󲣄
向 IO 卡的下󲱒失󲧺了。
IO 主程序的下󲱒被中止。
不能启机器。
󲣌在清除󳇮󲣄警告后，退出用󲱄件。
Ea02527 APPL BOARD TRANSFER ERROR(SRV-HEX)
Failed to download the SERVO BOARD.
Aborted to download the SRVMAIN-PROG.
Machine can't be started.
Please restart the machine software
after clearing this error.
APPL 卡的 SRV 主程序(SRVHEX)送󳇮󲣄
向伺服卡的下󲱒失󲧺了。
伺服主程序下󲱒被中止了。
不能启机器。
󲣌在清除󳇮󲣄警告后，退出用󲱄件。
Ea02528 APPL BOARD DOWNLOAD-STATUS ERROR
Incorrect Download-Status was found.
Aborted to download APPLMAIN,SRVMAIN-PROG.
Machine can't be started.
Please restart the machine software
after clearing this error.
APPL 卡的下󲱒状󳇮󲣄
下󲱒状异常。
APPL 主程序，伺服主程序的下󲱒已被中止。
不能启机器。
󲣌在清除󳇮󲣄警告后，退出用󲱄件。
Ea02529 DIGITAL MULTI CAMERA START ERROR
Digital multi camera can't be started.
The cause is which the following:
DIGITAL MULTI CAMERA START ERROR___
Digital multi camera can't be started.
The cause is which the following:
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 61 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Digital multi camera is broken.
Contact of Digital multi camera and a vision board, harness is loose.
Please restart the machine software after confirm a cause.
Camera No:
Digital multi camera is broken.
Contact of Digital multi camera and a vision board, harness is loose.
Please restart the machine software after confirm a cause.
Camera No:
Ea02530 Failed to write Board log. 基板履写入󳇮󲣄
Ea02531 FILE READ ERROR
It failed in reading board information.
Cause:
The board information data is broken.
There is a possibility that the mount data file has been damaged.
Measures:
If you have a backup data, delete the broken data, copy from the backup,
and reload the data.
If you don't, delete the broken data and create new data.
文件󲣐入󳇮󲣄
基板信息󲣐入失󲧺。
原因:
基板程序的基板信息文件的数据异常。
文件有可能破󰀴。
策:
如果有基板程序的份，󲣌除异常的基板程序、
制份程序，重新󲣐入。
如果没有基板程序的份,󲣌除异常的基板程序后，
再新建。
Ea02532 FILE READ ERROR
It failed in reading the mount information.
Cause:
The mount information data is broken.
There is a possibility that the mount data file has been damaged.
Measures:
If you have a backup data, delete the broken data, copy from the backup,
and reload the data.
If you don't, delete the broken data and create new data.
文件󲣐入󳇮󲣄
󲨉装信息文件󲣐入失󲧺。
原因:
基板程序中󲨉装信息文件的数据异常。
文件有可能破󰀴。
策:
如果有基板程序的份，󲣌除异常的基板程序、
制份程序，重新󲣐入。
如果没有基板程序的份,󲣌除异常的基板程序后，
再新建。
Ea02533 FILE READ ERROR
It failed in reading the mark information.
Cause:
The mark information data is broken.
There is a possibility that the mount data file has been damaged.
Measures:
If you have a backup data, delete the broken data, copy from the backup,
and reload the data.
If you don't, delete the broken data and create new data.
文件󲣐入󳇮󲣄
󰓜󲢅信息文件的󲣐入失󲧺。
原因:
基板程序中󰓜󲢅信息文件的数据异常。
文件有可能破󰀴。
策:
如果有基板程序的份，󲣌除异常的基板程序、
制份程序，重新󲣐入。
如果没有基板程序的份,󲣌除异常的基板程序后，
再新建。
Ea02534 FILE READ ERROR
It failed in reading the parts information.
Cause:
The parts information data is broken.
There is a possibility that the mount data file has been damaged.
Measures:
If you have a backup data, delete the broken data, copy from the backup,
and reload the data.
If you don't, delete the broken data and create new data.
文件󲣐入󳇮󲣄
元件信息文件的󲣐入失󲧺。
原因:
基板程序中元件信息文件的数据异常。
文件有可能破󰀴。
策:
如果有基板程序的份，󲣌除异常的基板程序、
制份程序，重新󲣐入。
如果没有基板程序的份,󲣌除异常的基板程序后，
再新建。
Ea02535 FILE READ ERROR
It failed in reading the pattern match information.
Cause:
The pattern match information data is broken.
There is a possibility that the mount data file has been damaged.
Measures:
If you have a backup data, delete the broken data, copy from the backup,
and reload the data.
If you don't, delete the broken data and create new data.
文件󲣐入󳇮󲣄
󰔌匹配信息文件󲣐入失󲧺。
原因:
基板程序中󰔌匹配信息文件的数据异常。
文件有可能破󰀴。
策:
如果有基板程序的份，󲣌除异常的基板程序、
制份程序，重新󲣐入。
如果没有基板程序的份,󲣌除异常的基板程序后，
再新建。
Ea02536 FILE READ ERROR
It failed in reading the BGA information.
Cause:
The BGA information data is broken.
There is a possibility that the mount data file has been damaged.
Measures:
If you have a backup data, delete the broken data, copy from the backup,
and reload the data.
If you don't, delete the broken data and create new data.
文件󲣐入󳇮󲣄
BGA 信息文件󲣐入失󲧺。
原因:
基板程序中 BGA 信息文件的数据异常。
文件有可能破󰀴。
策:
如果有基板程序的份，󲣌除异常的基板程序、
制份程序，重新󲣐入。
如果没有基板程序的份,󲣌除异常的基板程序后，
再新建。
Ea02537 FILE WRITE ERROR
Failed to write Board information.
文件写入󳇮󲣄
基板信息的写入失󲧺了。
Ea02538 FILE WRITE ERROR
Failed to write Mount Data.
文件写入󳇮󲣄。
󲨉装信息的写入已失󲧺。
Ea02539 FILE WRITE ERROR
Failed to write Mark Data.
文件写入󳇮󲣄
󰓜󲢅信息的写入已失󲧺。
Ea02540 FILE WRITE ERROR 文件写入󳇮󲣄
Comparison Table ( English - Chinese )
VGOS V2.46STD R1.000 62 / 237 Copyright (C) 2009 Yamaha Motor Co.,Ltd. All Rights Reserved.
Code
CodeCode
Code
English
EnglishEnglish
English
Chinese
ChineseChinese
Chinese
Failed to write Component Data. 元件信息的写入已失󲧺。
Ea02541 FILE WRITE ERROR
Failed to write Pattern Matching Data.
文件写入󳇮󲣄
󰔌匹配信息的写入已失󲧺。
Ea02542 FILE WRITE ERROR
Failed to write BGA Data.
文件写入󳇮󲣄
BGA 信息的写入已失󲧺。
Ea02543 FILE READ ERROR
Failed to read "OmaShift.sts".
文件󲣐入󳇮󲣄
"OmaShift.sts"文件的󲣐入已失󲧺。
Ea02544 FILE WRITE ERROR
Failed to write "OmaShift.sts".
文件写入󳇮󲣄
"OmaShift.sts"文件的写入已失󲧺。
Ea02545 FILE READ ERROR
It failed in reading the machine setting data.
Cause:
The machine configuration data file is broken.
There is a possibility that the mount data file has been damaged.
Measures:
Please restore the machine data.
文件󲣐入󳇮󲣄
机器󲢓置数据文件󲣐入失󲧺。
原因:
机器󲢓置数据的内容异常。
文件有可能破󰀴。
策:
󲣌使用程序份、󲲭原机器数据。
Ea02546 FILE WRITE ERROR
Failed to write Machine Config.
文件写入󳇮󲣄
机器构成的写入失󲧺。
Ea02547 FILE READ ERROR
It failed in reading the machine setting data.
Cause:
The machine configuration data file is broken.
There is a possibility that the mount data file has been damaged.
Measures:
Please restore the machine data.
文件󲣐入󳇮󲣄
机器󲢓置数据文件󲣐入失󲧺。
原因:
机器󲢓置数据异常。
文件有可能破󰀴。
策:
󲣌使用程序份、󲲭原机器数据。
Ea02548 FILE WRITE ERROR
Failed to write Machine Data.
文件写入󳇮󲣄
机器数据的写入已失󲧺。
Ea02549 FILE READ ERROR
Failed to read Nozzle Specification.
文件󲣐入󳇮󲣄
吸嘴󲚙格的󲣐入已失󲧺。
Ea02550 FILE WRITE ERROR
Failed to write Nozzle Specification.
文件写入󳇮󲣄
吸嘴󲚙格的写入已失󲧺。
Ea02551 FILE READ ERROR
Failed to read Head Specification.
文件󲣐入󳇮󲣄
󲨉装󲚙格的󲣐入已失󲧺。
Ea02552 FILE WRITE ERROR
Failed to write Head Specification.
文件写入󳇮󲣄
󲨉装󲚙格的写入已失󲧺。
Ea02553 FILE READ ERROR
Failed to read FNC Specification.
文件󲣐入󳇮󲣄
FNC 󲚙格的󲣐入已失󲧺。
Ea02554 FILE WRITE ERROR
Failed to write FNC Specification.
文件写入󳇮󲣄
FNC 󲚙格的写入已失󲧺。
Ea02555 FILE READ ERROR
Failed to read Feeder Specification.
文件󲣐入󳇮󲣄
送料器󲚙格的󲣐入已失󲧺。
Ea02556 FILE WRITE ERROR
Failed to write Feeder Specification.
文件写入󳇮󲣄
送料器󲚙格的写入已失󲧺。
Ea02557 FILE READ ERROR
Failed to read Feeder Plate Specification.
文件󲣐入󳇮󲣄
送料器架󲚙格的󲣐入已失󲧺。
Ea02558 FILE WRITE ERROR
Failed to write Feeder Plate Specification.
文件写入󳇮󲣄
送料器架󲚙格的写入已失󲧺。
Ea02561 FILE READ ERROR
Failed to read Vacuum Level for Each Nozzle.
文件󲣐入󳇮󲣄
各吸嘴真空文件的󲣐入已失󲧺。
Ea02562 FILE WRITE ERROR
Failed to write Vacuum Level for Each Nozzle.
文件写入󳇮󲣄
各吸嘴真空文件的写入已失󲧺。
Ea02563 FILE READ ERROR
Failed to read Feeder Timer Specification.
文件󲣐入󳇮󲣄
送料器󲡶󰋋󲚙格的󲣐入已失󲧺。
Ea02564 FILE WRITE ERROR
Failed to write Feeder Timer Specification.
文件写入󳇮󲣄
送料器󲡶󰋋󲚙格的写入已失󲧺。
Ea02565 I/O LIST FILE READ ERROR
Failed to read I/O List Data.
󲣐入 I/O 列表文件󳇮󲣄
I/O 列表的󲣐入已失󲧺。
Ea02566 I/O LIST FILE WRITE ERROR
Failed to write I/O List Data.
写入 I/O 列表文件󳇮󲣄
I/O 列表的写入已失󲧺。
Ea02567 TYPE FILE READ ERROR
Failed to read Motor Type File.
󲣐入󱥐型文件󳇮󲣄
󳝁达󱥐型文件的󲣐入已失󲧺。
Ea02568 TYPE FILE WRITE ERROR
Failed to write Motor Type File.
写入󱥐型文件󳇮󲣄
󳝁达󱥐型文件的写入已失󲧺。
Ea02569 SPEC FILE READ ERROR
Failed to read Specification File.
󲣐入󲚙格文件󳇮󲣄
󲚙格文件的󲣐入已失󲧺。
Ea02570 SPEC FILE WRITE ERROR
Failed to write Specification File.
写入󲚙格文件󳇮󲣄
󲚙格文件的写入已失󲧺。
Ea02571 DISPENSE NOZZLE SHAPE FILE READ ERROR
Failed to read Dispense Nozzle Shape.
󲣐入点胶嘴形状文件󳇮󲣄
点胶嘴形状文件的󲣐入已失󲧺。
Ea02572 DISPENSE NOZZLE SHAPE FILE WRITE ERROR
Failed to write Dispense Nozzle Shape.
点胶嘴形状文件写入󳇮󲣄
点胶嘴形状文件的写入已失󲧺。