JX-350_EPU使用说明书.pdf - 第161页
EPU Instruction M anual C hapter 4 Creating a Production Progr am 4- 113 6) Displ ay head image W hen you check off the [Head imag e] butt on of t he operating but ton, a head imag e is displayed according to t he mouse …
EPU Instruction Manual Chapter 4 Creating a Production Program
4-112
2) Feeder movement/copy
After selecting a feeder to be moved, drag it to the destination and release it (by
releasing the button).
A At this time, check off the [Copy] button. Then, the selected feeder is copied.
Click a feeder
Drag a feeder
Drop a feeder
3) Feeder deletion
In the feeder selection status, press the [Delete] button to delete the feeder.
4) Stick component duplication
When there is no stick in the duplicating destination, a stick feeder of the same
type is newly assigned. Components are assigned to lane 1. The stick feeder
is mounted at the position closest to the duplicating destination in which an
assignment area can be secured. Duplication can be performed between stick
feeders of the same type.
5) Stick changer component duplication
When there is no stick changer in the duplicating destination, a stick changer of
the same type is newly assigned. Components are assigned to lane 1. The
stick changer is mounted at the position closest to the duplicating destination in
which an assignment area can be secured.
When the rear feeder option in the “EPU setup” menu is disabled, the movement from
the front to the rear and copy cannot be performed.
EPU Instruction Manual Chapter 4 Creating a Production Program
4-113
6) Display head image
When you check off the [Head image] button of the operating button, a head
image is displayed according to the mouse cursor. In the head image display
mode, the space between heads is displayed as an image. Bring the mouse
cursor to the bank image. Then, the head image displays the feeders having a
possibility of simultaneous pick-up in orange. If the feeders are arranged
according to the head space, simultaneous pick-up can be performed as
specified.
7) Movement/copy by axial symmetry or dot symmetry
Drag the feeder. In the reverse video status, press the [Axial symmetry] or [Dot
symmetry] to move the feeder.
In the status where the [Copy] button is checked off, copying is performed.
When you select the feeder on the front side, it is moved or copied to the rear
side. When you select the feeder on the rear side, it is moved or copied to the
front side. (Copy components cannot be copied.)
If components are already assigned to the copy destination, copying is not
performed.
• Copying by axial symmetry
The feeder is moved or copied to the position opposite to the hole number of
the front/rear side.
• Copying by dot symmetry
The feeder is moved or copied to the symmetrical hole position so that
front/rear overall change may be mutually used.
①
線対称でｺﾋﾟｰした場合
F-79
F-75
R-79
R-75
点対称でｺﾋﾟｰした場合
F-79
F-75
R
-5
R-1
F-71
F-71
①
②
②
When the rear feeder option in the “EPU setup” menu is disabled, copying by axial
symmetry and copying by dot symmetry cannot be performed.
(The buttons cannot be selected.)
When a feeder is copied to the
position symmetrical to a point
When a feeder is copied to the
position symmetrical to a line
EPU Instruction Manual Chapter 4 Creating a Production Program
4-114
(3) Reference mode and initialization
If there is a difference in electric-powered system and mechanism between the supply
bank of the placer proper and the production program feeder type when the
production program is read and program editing is executed, a feeder layout appears
after a message is displayed.
Check the bank connection and the feeder type of pick data in the reference mode.
To change the program, initialize the pick data.
1) [View Program] button
editing is started in the reference mode and the contents of the program can be
checked.
At this time, program change and teaching operations are disabled.
2) [Initialize] button
The pickup data of a feeder in a different status is initialized and changed into
one initialization data of "Auto selection."
As a result, the number of component supply becomes one.