JX-350_EPU使用说明书.pdf - 第37页
EPU Instructi on Manual Chapter 3 E PU setup 3- 11 3.6.3 Setting the unit t yp e S pecify the unit to be us ed for editing data on t he EPU screen. Set the length and pressure unit sy stems here. Acc ording to these sett…
EPU Instruction Manual Chapter 3 EPU setup
3-10
3.6.2 Specifying a database
Select a database you want to use it for the program edit.
Note that you cannot select [Use Server Component Database] unless the component
database is installed.
3.6.2.1 Component DB
Check on [Use Component Database] when you use Flexline database.
When you check on [Use Flexline Database], you can select a database file you want to
use.
The database folder is a folder created by Flexline database.
Specify the full path including a drive name as the name of a database folder.
Its extension should be “mdb”, and you cannot specify another extension:
if you specify another extension, it is replaced with “MDB” automatically.
♦ Check on a radio button in the “DataBase Folder” area and click [Browse].
The following dialog box will appear.
In this dialog box, specify a folder and a file.
When the EPU Profile screen appears, click the <OK> button.
3.6.2.2 Server Component DB
It is set when using server Component DB.
It can be used by setting the IP address or PC name and port number of the server on
which the Component DB of the production support system is installed.
EPU Instruction Manual Chapter 3 EPU setup
3-11
3.6.3 Setting the unit type
Specify the unit to be used for editing data on the EPU screen.
Set the length and pressure unit systems here. According to these settings, EPU displays
or allows you to enter data on the screen.
[Unit type displayed on the screen]
- Length: This setting will be reflected through all of data on length such as XYZ
coordinates and board size to be displayed or entered on the EPU screen.
(Default: mm)
- Pressure: This setting will be reflected through all of data on pressure such as
component pick-up vacuum pressure to be displayed or entered on the EPU
screen. (Default: kPa)
EPU Instruction Manual Chapter 3 EPU setup
3-12
3.7 Setting a Station Profile
This command makes settings such as the board transport direction, reference side,
permanent nozzle and various options so that the environment of a production program can
be set to the same as that of the machine you are to operate actually.
3.7.1 Basic settings
Select the [Station Profile] command on the “Setup” menu provided with the EPU Setup
module
◊
Set the station conditions on this screen. The number of profiles you can set is up to
36.