JX-350_EPU使用说明书.pdf - 第204页
EPU Instruction M anual Chapter 5 Database 5-6 W hen t he following error messag e is displayed, the component data of the database is associated. For details, ref er to the inst ruction manual of the produc tion support…
EPU Instruction Manual Chapter 5 Database
5-5
5.1.2 Register
This command registers component data of a production program in the database record
by record on the “Program Editor” screen.
<Procedure>
① Open the “Component” data screen with the “Program Editor.”
②
Select a component to be registered (with clicking a line of the desired component on
the “List” screen, for example), and click the [Database]/[Register] commands.
③ The following dialog box appears on the screen. When you press the <OK> button,
the system registers data in the database.
When a component with the same name is already registered, the following message
dialog appears.
Click <OK> to overwrite the component data; click <Cancel> not to overwrite it.
EPU Instruction Manual Chapter 5 Database
5-6
When the following error message is displayed, the component data of the database is
associated.
For details, refer to the instruction manual of the production support system.
If you select “Yes” for the menu item “Notify when data into DB” on the “Environ-
ment setting” screen, the following message appears on the screen when the system
finishes registering data into the database.
If you select “No” for the menu item “Notify when data into DB” on the “Environ-
ment setting” screen, the “Information” message shown above does not appear on the
screen.
• The system registers component data in the database sequentially according to
each component name.
• The database in which the system registers data is the database specified with
the “Environment Setting” (See Section 4.3.2 “Environment setting”).
EPU Instruction Manual Chapter 5 Database
5-7
5.1.3 Call List
When you select the [Database] command from the “Placement data” screen (if any
component name is not entered in the Placement data) or the “Component data” screen,
you can select the [Call List] command. If any component name is entered in the
Placement data, you cannot execute this command. In this case, this command is
dimmed on the “Database” menu.
See Section 5.1.1 “How to Use a Database” for how to execute this command.
5.1.3.1 Search
You can search the component database for data.
<Procedure>
①
Click the <Search> button on the database list screen.