JX-350_EPU使用说明书.pdf - 第45页
EPU Instructi on Manual Chapter 3 E PU setup 3- 19 3.7.2 Explana tion of buttons 3.7.2 .1 Previous St ation This button saves your change o f a station pro file that is being currently edited, then displays the profile o…
EPU Instruction Manual Chapter 3 EPU setup
3-18
Option 2
• Display the units which can be installed as an option.
Setting item Description Remarks
Component height Select the component height. (6mm/12mm)
Fix nozzle selection in
component dimension
change.
When you check this check box, the system continues
using the nozzle already set without changing the nozzle
selection even though you change the dimensions of a
component on the “Component” data screen.
Set blank PWB height by
default.
Leave blank the “Thickness” field of a board on the
“PWB” data screen without setting the default value.
When you load a production program for a model having
no board thickness data to the system, this field
becomes blank also.
Do not change related value
when Component data is
edited.
When you check this check box, the system does not set
the standard value (initial value) to each item already set
except the edited item(s) even though you edit the
component data already set.
Long board option Select this item to use the long board option.
EPU Instruction Manual Chapter 3 EPU setup
3-19
3.7.2 Explanation of buttons
3.7.2.1 Previous Station
This button saves your change of a station profile that is being currently edited, then
displays the profile of the previous station on the screen.
◊
This button does not function if a station that is being edited is the first station.
3.7.2.2 Next Station
This button saves your change of a station profile that is being currently edited, then
displays the profile of the next station on the screen.
3.7.2.3 Nozzle
This button allows you to assign the nozzle number and nozzle type to an ATC.
The nozzles you set here are referred with the Optimization function provided by the
Program Editor.
The display and the number of settable nozzles may vary depending on “Screw-type
nozzle” setting on the [Option] tab.
No use Use
◊
When you click “Type” column with the mouse right button, the nozzle type menu
appears on the screen as shown below.
Number of settable nozzles:
Screw type nozzle No Use: 26 pcs.
Use: 6 pcs.
EPU Instruction Manual Chapter 3 EPU setup
3-20
◊
To delete a nozzle already set, press the [DEL] or [SPACE] key.
• When you click the <OK> button, EPU saves your change, then returns to the
“Station profile” screen.
• When you click the <Clear> button, the nozzle setting currently being displayed is
cleared.
• When you click the <Cancel> button, EPU discards your change, then returns to
the “Station profile” screen.
3.7.2.4 Delete
The station profile being displayed now can be deleted with the [Delete] button. However, the
[Delete] button can be pressed for other than the active station profile. When the [Delete]
button is pressed, the following confirming message is displayed.
3.7.2.5 Undo changes
The station profile can be returned to the state at the first stage of the display by pressing the
[Undo Changes] button.
The following confirming message is displayed before it is undone.