88192277-01-19 - Micron Technical Reference V9 Volume 4.pdf - 第118页
DIAGNOSTI CS VACUUM TOOLING 39.32 Technical Reference Manual Chapter Issue 4, Aug 14 V ACUUM TOOLING Selecting this diagnostics modul e opens the following window: The following icons are displayed: Run Diagnost activate…
DIAGNOSTICS
MULTI INTERFACE UNIT
Chapter Issue 4, Aug 14 Technical Reference Manual 39.31
MULTI INTERFACE UNIT
Selecting this diagnostics module opens the following window:
The following icons are displayed:
Next/Previous moves the highlight bar up and down the list of selectable
diagnostic functions.
Toggle activates the diagnostic function, as selected by the highlight bar.
Exit returns operation to the module diagnostics page.
NOTE
This diagnostic can only be run when the printer is connected to an upline and
downline machine.
Toggle Available A This diagnostic function is currently not used.
Toggle Upline A Selecting this diagnostic function sends a request to the upline machine to send
a board.
Toggle Downline A Selecting this diagnostic function sends a request to the downline machine to
receive a board.
Machine Available
A
This diagnostic function is currently not used.
Downline Ready A This diagnostic function continuously displays whether the downline machine is
ready to receive a board.
Upline Ready A This diagnostic function continuously displays whether the upline machine is
ready to send a board.
MIU Diagnostics
CLEAR
OFF
Machine Available A
Downline Ready A
Upline Ready A
Toggle
Available A
Upline A
Downline A
OFF
ON
CLEAR
SET
NextToggle
Previous
Exit
DIAGNOSTICS
VACUUM TOOLING
39.32 Technical Reference Manual Chapter Issue 4, Aug 14
VACUUM TOOLING
Selecting this diagnostics module opens the following window:
The following icons are displayed:
Run Diagnost activates the diagnostic function, as selected by the highlight
bar.
Exit returns operation to the module diagnostics page.
Toggle Vacuum
Pump
Selecting this diagnostic function alternately switches the vacuum pump on and
off, while continuously displaying the current status.
Vacuum Tooling
Sensor
This diagnostic function continuously displays the status of the vacuum tooling
sensor.
Vacuum Tooling Diagnostics
ON
OFF
Vacuum Tooling Sensor
Toggle Vacuum Pump
Run
Diagnost
Exit
DIAGNOSTICS
PASS THROUGH RAILS
Chapter Issue 4, Aug 14 Technical Reference Manual 39.33
PASS THROUGH RAILS
Selecting this diagnostics module opens the following window:
NOTE
Rail Clash Sensor is not displayed on the front print machine.
The following icons are displayed:
Next/Previous moves the highlight bar up and down the list of selectable
diagnostic functions.
Run Diagnost activates the diagnostic function, as selected by the highlight
bar.
Exit returns operation to the module diagnostics page.
Adjust opens the following window:
The following icons are displayed:
Next/Previous moves the highlight bar up and down the list of diagnostic
parameters.
Incr./Decr. changes the value of the selected diagnostic parameter.
Exit returns operation to the rail system diagnostics page.
NOTE
These parameters are used in diagnostics only and have no affect on the
product board file.
Rail Clash Sensor
Rail Move Inhibit
FMI Inhibit
Cycle Count Done :- 0, To go :- 50
OFF
Home Rail Width
Drive Rail To Board Width
Set Rail Board Width Calibration
Drive Rail Width Using Two Button Control
Cycle Rails
Drive Rail To Max Board Width
Pass Through Rail Diagnostics
OFF
OFF
Run
Diagnost
NextAdjust
Previous
Exit
Pass Through Rail Test Parameters
Pass Thr Board Width
CYCLE COUNT
100.0
50
mm
Cycles
Next Incr. Decr.
Previous
Exit