88192277-01-19 - Micron Technical Reference V9 Volume 4.pdf - 第184页
TRANSPORTATION - MAJOR RELOCATION DISMANTLING THE MACHINE 42.18 Technical Reference Manual Chapter Issue 5, Nov 19 T ype 4 Covers 1. Remove the Rear Right Hand Corner Panel to reveal socket 14SK07. 2. Disconnect the T ri…
TRANSPORTATION - MAJOR RELOCATION
DISMANTLING THE MACHINE
Chapter Issue 5, Nov 19 Technical Reference Manual 42.17
Type 3 Covers 1. Using a 3mm Allen key, remove the beacon bracket from the machine cover.
2. Pull the cable up through the hole to reveal the connector.
3. Maintaining hold of the socket 14SK07 (to prevent the socket from falling
into the machine through the hole), disconnect the tricolour beacon connec-
tion 14PL07 from 14SK07.
4. Place the socket 14SK07 in the cut-out on the cover.
5. Refit the four beacon bracket securing screws.
Beacon Bracket
Tricolour Beacon
Beacon Securing Nut
Beacon Bracket Cut-Out
Beacon Bracket Securing
Screws (in 4 positions)
Beacon Bracket
Securing Screws
(in 4 positions)
Beacon Connector
(14SK07)
View on Right Hand Side of the Machine
TRANSPORTATION - MAJOR RELOCATION
DISMANTLING THE MACHINE
42.18 Technical Reference Manual Chapter Issue 5, Nov 19
Type 4 Covers 1. Remove the Rear Right Hand Corner Panel to reveal socket 14SK07.
2. Disconnect the Tricolour beacon connection 14PL07 from 14SK07.
3. Using a 3mm Allen key, remove the beacon bracket securing screws from
the machine cover.
4. Remove the Tricolour beacon assembly from the machine feeding connec-
tion 14PL07 up through the hole in the cover with any surplus cable.
5. Refit the four beacon bracket securing screws.
6. Refit the Rear Right Hand Corner Panel.
Type 5 Covers 1. Remove the Rear Upper Panel to reveal socket 14SK07.
2. Disconnect the tricolour beacon connection 14PL07 from 14SK07.
3. Using a 3mm Allen key, remove the beacon bracket securing screws from
the machine cover.
4. Remove the Tricolour beacon assembly from the machine feeding connec-
tion 14PL07 up through the hole in the cover with any surplus cable.
5. Refit the four beacon bracket securing screws.
6. Refit the Rear Upper Panel.
Beacon Bracket
Securing Screws
(in 4 positions)
View on Right Hand Side of the Machine
View on Underside of Beacon Bracket
Beacon Connector
()14SK07
Beacon Bracket
Securing Screws
(in 4 positions)
View on Right Hand Side of the Machine
View on Underside of Beacon Bracket
Beacon Connector
()14SK07
TRANSPORTATION - MAJOR RELOCATION
DISMANTLING THE MACHINE
Chapter Issue 5, Nov 19 Technical Reference Manual 42.19
Man Machine
Interface (MMI)
Type 1 Covers 1. Remove the following connections on the rear of the monitor:
• Monitor Power Cable (DC)
•VGA Cable
• Touchscreen Cable (USB)
2. Disconnect the Rear Monitor USB Connection (free floating connector
behind the monitor).
3. Remove the front cover.
4. Locate the free floating USB connector inside the machine that the keyboard
connects to.
5. Disconnect the keyboard unit from the USB connector and feed the cable
outside the machine.
6. Unscrew the monitor securing screw and lift the monitor upwards to remove
it from the monitor fixing bracket (monitor shown removed for clarity).
Monitor Fixing Bracket
Monitor Securing Screw