88192277-01-19 - Micron Technical Reference V9 Volume 4.pdf - 第197页
TRANSPORTATION - MAJOR RELOCATION DISMANTLING THE MACHINE Chapter Issue 5, Nov 19 Technical Reference Manual 42.31 3. Disconnect the external solvent tank cable from 9SK69 on the external services panel located at the re…
TRANSPORTATION - MAJOR RELOCATION
DISMANTLING THE MACHINE
42.30 Technical Reference Manual Chapter Issue 5, Nov 19
Removal of External Solvent Tank
MANDATORY
TOXIC CHEMICALS MAY BE PRESENT. SAFETY GLOVES MUST BE WORN.
MANDATORY
TOXIC CHEMICALS MAY BE PRESENT. EYE PROTECTION MUST BE WORN.
To disconnect and remove the external solvent tank, carry out the following:
1. Loosen the two M5 cap head securing screws and slide the angle brackets
away from the machine cover.
2. Remove the rear panel using the maintenance key.
Machine Cover
Securing Screws
Angle Brackets
TRANSPORTATION - MAJOR RELOCATION
DISMANTLING THE MACHINE
Chapter Issue 5, Nov 19 Technical Reference Manual 42.31
3. Disconnect the external solvent tank cable from 9SK69 on the external
services panel located at the rear of the machine.
4. Unscrew the cap from the solvent container allowing any surplus solvent to
drain back into the solvent container.
5. Pass the cap through the hole in the external solvent tank base plate.
6. Secure the combined solvent container cap and 4mm tubing inside the
machine, as high as possible to prevent solvent drainage.
7. Fit the original solvent container cap to seal the solvent container.
8. Remove the solvent container from the external solvent tank.
9. Supporting its weight, slide the external solvent tank towards the machine,
releasing the mounting bracket from the machine frame.
10. Remove the external solvent tank from the machine.
11. Fit the rear panel using the maintenance key.
View on Rear of Machine
POWER ON
PART No. 160740
M/C AVAILABLE
BOARD AVAILABLE
BOARD PASS
D
O
W
N
L
IN
E
BOARD AVAILABLE
BOARD PASS
M/C AVAILABLE
U
P
L
IN
E
FMI POD
Solvent Fluid
Connector
Solvent Sensor
9SK69
Solvent Container Cap
Base Plate
TRANSPORTATION - MAJOR RELOCATION
DISMANTLING THE MACHINE
42.32 Technical Reference Manual Chapter Issue 5, Nov 19
Removing the
Handheld Barcode
Reader
1. Gain access to the 4 port USB hub behind the front panel.
2. Disconnect the handheld barcode reader from the spare USB port on the
hub.
Tooling and Print
Medium
Applicators
Remove any print medium applicators and tooling from the machine.