88192277-01-19 - Micron Technical Reference V9 Volume 4.pdf - 第16页
Technical Reference Manual CUSTOMER USE Date Originator Name & Department Position Company T elephone Fax Email Machine Model Number Software V ersion Serial Number Manual T itle Chapter Chapter / Figu re Details of …
Technical Reference Manual
MANUAL INFORMATION
Information in this manual is subject to change without notice.
No part of this manual may be reproduced, transmitted in any form or means,
electronically or mechanically, including photocopying and recording, for any
purpose without the express written permission of ASM Assembly Systems
Singapore Pte Ltd.
Every effort has been made during the composition of this manual to ensure
that the information has been clearly presented and correct in all respects.
If during the use of this manual, errors or omissions are found, or the reader
considers that improvements are necessary to overcome any ambiguity or
inaccuracies, a copy of the manual change request form should be completed
and either faxed or forwarded to the address below, accompanied with a copy
of the relevant page and/or figure of the manual with the recommendation.
Quality Manager
ASM Assembly Systems Weymouth Ltd
11 Albany Road
Granby Industrial Estate
Weymouth
Dorset
DT4 9TH
United Kingdom
Tel: +44 1305 760760
Fax: +44 1305 760123
Technical Reference Manual
CUSTOMER USE Date
Originator Name & Department
Position
Company
Telephone
Fax
Email
Machine Model Number
Software Version
Serial Number
Manual Title
Chapter
Chapter / Figure
Details of Change
Attachments
INTERNAL USE No.
Accepted No Reason
Yes Priority Immediate
Next Release
Details of Change
Manuals Affected Name
Date Signature
NETWORKING
INTRODUCTION
Chapter Issue 6, Nov 19 Technical Reference Manual 36.1
CHAPTER 36 NETWORKING
INTRODUCTION
Scope This chapter describes the basic procedures for networking a DEK printing
printer. It does not contain any in-depth information about installing equipment
onto a network or fault analysis. Additionally, it does not cover subject matter
such as server topologies, IP Addressing and network classifications. If it is
necessary to obtain further information please contact ASM Customer Support.
Anti-Virus
Checking
The DEK printer is virus checked before leaving the factory and it is the
customers’ responsibility to ensure the printer is kept virus free. Once the DEK
printer is connected to another computer or a network, it is at risk from viruses.
When connected to a network, ensure that the network virus check includes the
DEK printer in its schedule.
NOTE
There is no virus checking software loaded on to the DEK printer.
Establishing a
Network
Connection
The four items that need to be set up to establish a network connection are listed
below:
Protocol Generally, the protocol used is TCP/IP (Transmission Control Protocol/Internet
Protocol) where communications between computers is divided into packets
with headers (electronic address labels) that identify the IP address. Every IP
Address is divided into the network ID portion (Net id) and a client ID portion
(Host id).
NOTE
ASM can support any protocol that customer has, only TCP/IP needs the
information provided in this chapter, other protocols provide automatic address-
ing techniques.
Physical Establish the cable type, examples are shown.
• 10 Base T (Thin Ethernet)
NOTE
ASM only provide support for the 10 Base T cable types. The plug is an RJ45
type and it is recommended that a CAT 5 twisted pair arrangement is used
(details later in this chapter).
Once this is known the location of the network socket must be assessed and an
assessment made of the suitability of the system for the application.
NOTE
If a customer has a different arrangement to the above, it may be possible to
convert to this arrangement using a different connector. Contact ASM Customer
Support for details.
Registration on the
Server Domain
ASM only support networking on Microsoft Windows Server/Client based archi-
tecture.
The printing machine needs to be registered on the correct domain, this
information is obtained from the network administrator and there may be a
requirement to have a user account set up and a password given.