88192277-01-19 - Micron Technical Reference V9 Volume 4.pdf - 第286页
TRANSPORTATION - POWER UP MACHINE POWER UP SEQUENCE 43.12 Technical Reference Manual Chapter Issue 3, Nov 19 3. Select Change . 4. Set the correct date and time using the drop d own arrows. 5. Select Change .
TRANSPORTATION - POWER UP
MACHINE POWER UP SEQUENCE
Chapter Issue 3, Nov 19 Technical Reference Manual 43.11
Windows 10 To set the date and time in Windows 10 the user must be logged in as an
administrator. Login as an administrator and carry out the following procedure.
1. Select the clock displayed at the right hand side of the Windows taskbar.
The following window is displayed:
2. Select Date and time settings.
TRANSPORTATION - POWER UP
MACHINE POWER UP SEQUENCE
43.12 Technical Reference Manual Chapter Issue 3, Nov 19
3. Select Change.
4. Set the correct date and time using the drop down arrows.
5. Select Change.
TRANSPORTATION - POWER UP
MACHINE POWER UP SEQUENCE
Chapter Issue 3, Nov 19 Technical Reference Manual 43.13
6. Using the drop down box, select the appropriate time zone.
7. Select X (close).
8. Select Start on the taskbar.
NOTE
Return the Windows login to the Operator account.
9. Select DEK Printer Software.
10. Press the System button.
E Stop Loop
Operation
Carry out the following procedure for E Stop loop operation check:
1. Press the E Stop button. The Restore Power window is displayed.
2. Reset the E Stop by turning the E Stop button clockwise until it unlatches.
3. Press the System button when prompted.
4. Open the front printhead cover. The Machine Operation Suspended -
Cover Open window is displayed.
5. Close the front printhead cover and press the System button when
prompted.
Fitting the
Handheld Barcode
Reader
1. Select Shut Down and switch the mains isolator to OFF.