88192277-01-19 - Micron Technical Reference V9 Volume 4.pdf - 第45页
STINGER EQUIPMENT LABELS AND N OTICES Chapter Issue 4, Nov 19 Technical Reference Manual 38.3 EQUIPMENT LABELS AND NOTICES Equipment Specific Safety Notices Where an option could represent a pot ential hazard, labels are…
38.2 Technical Reference Manual Chapter Issue 4, Nov 19
STINGER
OVERVIEW
Figure 38-1 Exploded View of the Dispense Mechanism
The unit can be programmed to purge the contents of the syringe, ensuring
consistency, prior to a production run. Externally, a consumable level sensor
detects the level of the adhesive in the syringe and warns the operator when
the level is low. A laser can be programmed to take height readings across the
top surface of the product; the information gained, is used to adjust the dispense
height, thereby increasing the consistency during the dispense cycle.
For detailed set up and operation procedures refer to manual, Stinger, a guide
to adhesive dot dispensing - Part Number 88198825-01.
Auger Valve Screw
Auger Body
Syringe Head
Tip
STINGER
EQUIPMENT LABELS AND NOTICES
Chapter Issue 4, Nov 19 Technical Reference Manual 38.3
EQUIPMENT LABELS AND NOTICES
Equipment
Specific Safety
Notices
Where an option could represent a potential hazard, labels are attached in
appropriate places on the equipment.
Compliance Labels Compliance labels may also be fitted to indicate the company, country and date
of manufacture.
Equipment Label
Locations
38.4 Technical Reference Manual Chapter Issue 4, Nov 19
STINGER
EQUIPMENT LABELS AND NOTICES
LASER RADIATION
DO NOT STARE IN TO BEAM
Wavelength: 620 . . . . 680nm
Max. av. Output: <1mW
IEC 60825 - 1, Ed, 2, 2007
CLASS 2 LASER PRODUCT
DO NOT STARE IN TO BEAM
Wavelength: 620 . . . . 680nm
Max. av. Output: <1mW
IEC 60825 - 1, Ed, 2, 2007
CLASS 2 LASER PRODUCT
Complies with 21CFR 1040.10 and 1040.11
except for deviations pursuant to laser notice
No. 50. dated June 24. 2007
Complies with 21CFR 1040.10 and 1040.11
except for deviations pursuant to laser notice
No. 50. dated June 24. 2007
Mounting Assembly (beneath the top cover)