88192277-01-19 - Micron Technical Reference V9 Volume 4.pdf - 第198页
TRANSPORTATION - MAJOR RELOCATION DISMANTLING THE MACHINE 42.32 Technical Reference Manual Chapter Issue 5, Nov 19 Removing the Handheld Barcode Reader 1. Gain access to the 4 port USB hub behind the fro nt panel. 2. Dis…
TRANSPORTATION - MAJOR RELOCATION
DISMANTLING THE MACHINE
Chapter Issue 5, Nov 19 Technical Reference Manual 42.31
3. Disconnect the external solvent tank cable from 9SK69 on the external
services panel located at the rear of the machine.
4. Unscrew the cap from the solvent container allowing any surplus solvent to
drain back into the solvent container.
5. Pass the cap through the hole in the external solvent tank base plate.
6. Secure the combined solvent container cap and 4mm tubing inside the
machine, as high as possible to prevent solvent drainage.
7. Fit the original solvent container cap to seal the solvent container.
8. Remove the solvent container from the external solvent tank.
9. Supporting its weight, slide the external solvent tank towards the machine,
releasing the mounting bracket from the machine frame.
10. Remove the external solvent tank from the machine.
11. Fit the rear panel using the maintenance key.
View on Rear of Machine
POWER ON
PART No. 160740
M/C AVAILABLE
BOARD AVAILABLE
BOARD PASS
D
O
W
N
L
IN
E
BOARD AVAILABLE
BOARD PASS
M/C AVAILABLE
U
P
L
IN
E
FMI POD
Solvent Fluid
Connector
Solvent Sensor
9SK69
Solvent Container Cap
Base Plate
TRANSPORTATION - MAJOR RELOCATION
DISMANTLING THE MACHINE
42.32 Technical Reference Manual Chapter Issue 5, Nov 19
Removing the
Handheld Barcode
Reader
1. Gain access to the 4 port USB hub behind the front panel.
2. Disconnect the handheld barcode reader from the spare USB port on the
hub.
Tooling and Print
Medium
Applicators
Remove any print medium applicators and tooling from the machine.
TRANSPORTATION - MAJOR RELOCATION
TRANSPORTING THE MACHINE
Chapter Issue 5, Nov 19 Technical Reference Manual 42.33
TRANSPORTING THE MACHINE
If the machine is to be relocated to another site it is recommended that it is
encased in its original transportation box, or if not available, a new transporta-
tion box can be obtained from ASM Assembly Systems Weymouth Ltd.
If the machine is to be transported by sea freight, packing advice should be
sought from specialist freight companies.
WARNING
MACHINE LIFTING. TO PREVENT SERIOUS INJURY TO PERSONNEL, DURING
LIFTING AND TRANSPORTATION OPERATIONS, ENSURE THE MACHINE IS
LIFTED AND TRANSPORTED IN ACCORDANCE WITH INSTRUCTIONS DETAILED
IN THIS SECTION.
NOTE
Damage to the machine will occur if the machine is lifted:
• Using lifting strops
OR . . .
• From the sides
ASM recommends that the machine is lifted from the rear at all times however,
the machine may be lifted from the front if the machine is to be moved a short
distance or moved into line.
The machine may be lifted using a forklift truck or similar machine that meets
the following criteria:
• Minimum fork length of 1372mm (54 inches)
• Fork span >686mm (27 inches) and <914mm (36 inches)
• Fork Height (thickness) <50mm (2 inches)
• Lifting capability of 2000kg
1. Locate the forks under the machine base and lift the machine.