88192277-01-19 - Micron Technical Reference V9 Volume 4.pdf - 第206页

TRANSPORTATION - MAJOR RELOCATION MACHINE SUPPLIES AND ENVI RONMENTAL CONDITIONS 42.40 Technical Reference Manual Chapter Issue 5, Nov 19 Machine Footprints Figure 42-8 T ype 1 Covers R0 630. Max dimension from pivot poi…

100%1 / 310
TRANSPORTATION - MAJOR RELOCATION
MACHINE SUPPLIES AND ENVIRONMENTAL CONDITIONS
Chapter Issue 5, Nov 19 Technical Reference Manual 42.39
And as described in the IPC Standard J-STD-001G-Requirements for Soldered
Electrical and Electronic Assemblies Section 4 with respect to the following:
• Facilities - Cleanliness and ambient environments in all work areas be
maintained at levels that prevent contamination or deterioration of tools,
materials, and surfaces to be soldered or conformally coated. Eating,
drinking, smoking, including use of e-cigarettes, and/or use of tobacco
products be prohibited in the work area.
• Environmental Controls - The soldering facility (controlled work area) be
enclosed, temperature and humidity controlled, and maintained at a posi-
tive pressure.
• Controlled Work Area (CWA) For the purpose of this statement, a Con-
trolled Work Area (CWA) is defined as an enclosed assembly / processing
area maintained to a high degree of shop cleanliness, environmental
control, and foreign object debris (FOD) mitigation, either by process or
procedure, to limit the entry of contamination.
If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
This equipment should be installed in accordance with the Installation Manual.
ASM absolves itself of all responsibility if the machine is not used within its
operating envelope or for its intended purpose.
TRANSPORTATION - MAJOR RELOCATION
MACHINE SUPPLIES AND ENVIRONMENTAL CONDITIONS
42.40 Technical Reference Manual Chapter Issue 5, Nov 19
Machine Footprints
Figure 42-8 Type 1 Covers
R0630.
Max dimension from
pivot point
360
1150
Transfer Height 960
980 max)
(840 min to
Side View (Right)
1345
( min to 13 2 max)1102 6
1106
(1352 min to 1492 max)
141
Front View
1913
(1 min to 1 max)834 974
1471.5
Plan View
606
Front of
board
1758
1334
Weight
Boxed - 8 kg, Unboxed - 6 kg10 60
(Dependent upon configured options
selected with the machine)
Note
All dimensions
in millimetres
Board transfer
height 8
- 980 mm40
Screen load height 925 - 1065
mm
TRANSPORTATION - MAJOR RELOCATION
MACHINE SUPPLIES AND ENVIRONMENTAL CONDITIONS
Chapter Issue 5, Nov 19 Technical Reference Manual 42.41
Figure 42-9 Type 1 Covers (with HTC)
R0630.
Max dimension from
pivot point
360
1150
Transfer Height 960
980 max)
(840 min to
Side View (Right)
1345
( min to 13 2 max)1102 6
1106
(1352 min to 1492 max)
141
Front View
1913
(1 min to 1 max)834 974
1471.5
Plan View
606
Front of
board
1758
134
1334
1582
Weight
Boxed - 8 kg, Unboxed - 6 kg29 79
(Dependent upon configured options
selected with the machine)
Note
All dimensions
in millimetres
Board transfer
height 8
- 980 mm40
Screen load height 925 - 1065
mm