88192277-01-19 - Micron Technical Reference V9 Volume 4.pdf - 第261页
TRANSPORTATION - MAJOR RELOCATION MACHINE ASSEMBLY Chapter Issue 5, Nov 19 Technical Reference Manual 42.95 4. Fit the ProFlow A Tx system mount mechanism to the print carriage, ensuring that both locating dowels f it in…
TRANSPORTATION - MAJOR RELOCATION
MACHINE ASSEMBLY
42.94 Technical Reference Manual Chapter Issue 5, Nov 19
Fit ProFlow ATx
System Mount
To fit the ProFlow ATx system mount to the machine, carry out the following
procedure:
1. Locate the four captive mount screws and two locator dowels on the rear of
the mount plate of the ProFlow ATx system mount assembly.
2. Lower the ProFlow ATx system mount beam by manually turning the Z-axis
motor pulley counter-clockwise. This action reveals the four captive screw
heads located on the front face of the mount plate.
NOTE
The captive screws may be hidden behind the components on the front of
the mount assembly. Move the beam down until they are fully revealed.
3. Locate the two locator dowel holes on the front face of the print carriage.
View on Rear of ProFlow Mount
Mount Plate
Captive Mount
Screw (4 Positions)
Locator Dowel
(2 Positions)
Z-Axis Motor
Pulley
Locator Dowel Holes
View on Front Left Corner
TRANSPORTATION - MAJOR RELOCATION
MACHINE ASSEMBLY
Chapter Issue 5, Nov 19 Technical Reference Manual 42.95
4. Fit the ProFlow ATx system mount mechanism to the print carriage, ensuring
that both locating dowels fit into the locator dowel holes.
NOTE
Ensure the cables and air feed lines are free from moving parts that may
prevent the ProFlow ATx mount from being secured to the print carriage.
5. Secure the ProFlow ATx system mount to the print carriage; tighten the four
captive screws on the mount plate, using the 4mm T-bar Allen key supplied
(205973).
6. Using a crosshead screwdriver, attach the drag chain carrying the left hand
side cable and air feed connectors to the left hand side of the print carriage.
7. Connect the following to the ProFlow ATx connections on the left hand side
of the print carriage:
• Conditioning Grid Motor Power (9PL96)
• Head Empty Sensor (9PL77)
• Print Medium Cartridge Air Feed
• ProFlow Home (9PL08)
• Z-axis Stepper Motor Power (9PL17)
• Print Medium Low Sensor and ProFlow Fitted Link (9PL61)
• Conditioning Grid Motor CAN (9PL98)
View on Print Carriage Top Face
Left Side Drag
Chain Screw
TRANSPORTATION - MAJOR RELOCATION
MACHINE ASSEMBLY
42.96 Technical Reference Manual Chapter Issue 5, Nov 19
• Piston Down Air Feed
8. Using a crosshead screwdriver, connect the drag chain carrying the right
hand side connectors to the right hand side of the print carriage.
9. Connect the following to the ProFlow ATx connectors on the right hand side
of the print carriage
• Archimedes Screw Power (9PL100)
• Paste Load Feedback (9PL108)
View on Print Carriage Top Face
Right Side Drag
Chain Screw