00196693-03_UM_SX4DX4_SR706_EN.pdf - 第110页
3 Technical data and assemblies User Manual SIPLACE SX4/DX4 3.4 Overview of the modules From softw are version SC.706.xx Version 06/2012 EN 110 3.4.2 Overview of SI PLACE DX4 assemblies 3 3 Fig. 3.4 - 2 DX4 machine - ove…
User Manual SIPLACE SX4/DX4 3 Technical data and assemblies
From software version SC.706.xx Version 06/2012 EN 3.4 Overview of the modules
109
3.4 Overview of the modules
3.4.1 Overview of SIPLACE SX4 assemblies
3
3
Fig. 3.4 - 1 SX4 machine - overview of assemblies
(1) Location 1 with component trolley, tape cutter, empty tape duct
(2) Location 2 with component trolley, tape cutter, empty tape duct
(3) Location 3 with docking unit, tape cutter, empty tape duct
(4) Location 4 with docking unit, tape cutter, empty tape duct
(5) Gantry 1 at location 1 with placement head
(6) Gantry 2 at location 1 with placement head
(7) Monitor with keyboard (2x)
(8) Board conveyor
(T) Direction of PCB transport
(1)
(2)
(3)
(4)
(7)
(8)
(6)
(7)
(5)
3 Technical data and assemblies User Manual SIPLACE SX4/DX4
3.4 Overview of the modules From software version SC.706.xx Version 06/2012 EN
110
3.4.2 Overview of SIPLACE DX4 assemblies
3
3
Fig. 3.4 - 2 DX4 machine - overview of assemblies
(1) Location 1 with DX table, tape cutter, empty tape duct
(2) Location 2 with DX table, tape cutter, empty tape duct
(3) Location 3 with DX table, tape cutter, empty tape duct
(4) Location 4 with DX table, tape cutter, empty tape duct
(5) Gantry 1 at location 1 with placement head
(6) Gantry 2 at location 1 with placement head
(7) Monitor with keyboard (2x)
(8) Board conveyor
(9) Tape container with waste tape bin at location 1 to 4
(T) Direction of PCB transport
(1)
(2)
(3)
(4)
(7)
(8)
(6)
(7)
(5)
(9)
(9)
User Manual SIPLACE SX4/DX4 3 Technical data and assemblies
From software version SC.706.xx Version 06/2012 EN 3.5 Placement head
111
3.5 Placement head
3.5.1 SIPLACE SpeedStar C&P20 for very high speed placement
3
Fig. 3.5 - 1 SIPLACE SpeedStar - function group part 1
(1) DP drive, 20 drives
(2) "Vacuum sensor holding circuit" board
(3) Compressed air connection for 20 Venturi nozzles in the pick-up/placement and holding cir-
cuit
(4) Line for the exhaust air from the pressure control valve (7)
(5) Return cylinder
(6) Z motor (linear motor)
(7) Pressure control valve