00196693-03_UM_SX4DX4_SR706_EN.pdf - 第151页
User Manual SIPLACE SX4/DX4 3 Technical data and assemblies From software version SC.706.xx V ersion 06/2012 EN 3.9 X feeder modules for SIPLACE SX4/DX4 151 3 Fig. 3.9 - 2 8 mm X tape feeder module - back view (1) Entry …
3 Technical data and assemblies User Manual SIPLACE SX4/DX4
3.9 X feeder modules for SIPLACE SX4/DX4 From software version SC.706.xx Version 06/2012 EN
150
3.9.1.5 Design of the tape feeder module for the SIPLACE X series
The two following diagrams show the design of the tape feeder module for the X series with ref-
erence to the 8 mm X tape feeder module.
3
Fig. 3.9 - 1 8 mm X tape feeder module - front view
(1) Locking roller (the locking latch of the changeover table locks the feeder module in its end
position with the locking roller.)
(2) EDIF (energy and data interface)
(3) "Front" centering pin
(4) Lever for raising the pick-up window in order to thread in and remove the component tape
(5) Pickup window
(6) Exit from the tape guide channel
(7) Setting the cover foil tension
(8) Cover foil rocker
(9) Cover foil packing wheels
(10) "Back" centering pin
(11) Typeplate
User Manual SIPLACE SX4/DX4 3 Technical data and assemblies
From software version SC.706.xx Version 06/2012 EN 3.9 X feeder modules for SIPLACE SX4/DX4
151
3
Fig. 3.9 - 2 8 mm X tape feeder module - back view
(1) Entry to the tape guide channel with tape spring
(2) Flap on the cover foil container
(3) Integrated blade for cutting off the cover foil
(4) Removal handle, engaged
(5) Operator panel
(6) Drive motor for the cover foil packing device
(7) Drive motors for the tape conveyor
(8) Rotary valve for removing components
(9) Front slider guide
(10) Back slider guide
(11) Graphical representation of the pick-up position in relation to the component size
3 Technical data and assemblies User Manual SIPLACE SX4/DX4
3.9 X feeder modules for SIPLACE SX4/DX4 From software version SC.706.xx Version 06/2012 EN
152
3.9.2 Technical data for the SIPLACE X series feeder modules
The following pages contain pictures of the X series feeder modules and the technical data.
3.9.2.1 Tape feeder module 2x8 mm X
3
Fig. 3.9 - 3 Tape feeder module 2x8 mm X
3
Tape feeder module 2x8 mm X Item no. 00141269-xx
Tape feeder module 2x8 mm X with splice sensor Item no. 00141289-xx
Width 22.6 mm
Feeder module locations filled 2
Conveyor increment 1 mm / 2 mm / 4 mm / 8 mm
Changeover time for one tape < 45 s
Changeover time for the preset feeder module
on the machine
≤ 8 s