00196693-03_UM_SX4DX4_SR706_EN.pdf - 第124页

3 Technical data and assemblies User Manual SIPLACE SX4/DX4 3.5 Placement head From software version SC.706.xx Version 06/2012 EN 124 3.5.2.8 MultiSt ar in advanced Pick&Place mode with limited rot ation The MultiS t…

100%1 / 358
User Manual SIPLACE SX4/DX4 3 Technical data and assemblies
From software version SC.706.xx Version 06/2012 EN 3.5 Placement head
123
3.5.2.7 MultiStar in mixed mode with complete rotation
The MultiStar processes small to medium sized components in this mode.
3
Fig. 3.5 - 7 MultiStar - mixed mode
K_BE Small component (see table 3.5 - 1, page 120)
M_BE_1 medium sized component, type 1 (see table 3.5 - 1
, page 120)
M_BE_2 medium sized component, type 2 (see table 3.5 - 1
, page 120)
Type 30 component camera, type 30
Type 33 stationary component camera, type 33
1 ... 8 order of components taken up
1 ... 12 order of components taken up
3
Neighboring segments of the CPP head are not able to take up components of type M_BE_2 if the
diagonal length of the medium sized component, type 2 (M_BE_2) is longer than 39.8 mm.
Type 30 Type 30
Type 33 Type 33
K_BE
M_BE_2
M_BE_1
K_BE
3 Technical data and assemblies User Manual SIPLACE SX4/DX4
3.5 Placement head From software version SC.706.xx Version 06/2012 EN
124
3.5.2.8 MultiStar in advanced Pick&Place mode with limited rotation
The MultiStar can place the entire component spectrum from 01005 to 50 mm x 40 mm in this
mode. The large components are picked up last, optically centered and then placed as first com-
ponents.
3
Fig. 3.5 - 8 MultiStar - mixed mode
K_BE small component (see table 3.5 - 1, page 120)
M_BE_2 medium sized component, type 2 (see table 3.5 - 1
, page 120)
G_BE large component (see table 3.5 - 1
, page 120)
Type 30 component camera, type 30
Type 33 stationary component camera, type 33
1 ... 8 order of components taken up
3
Neighboring segments of the CPP head are not able to take up components of types M_BE_2 and
G_BE if the diagonal length of these components is longer than 39.8 mm.
Type 30
K_BE
G_BE
Type 33
M_BE_2
User Manual SIPLACE SX4/DX4 3 Technical data and assemblies
From software version SC.706.xx Version 06/2012 EN 3.5 Placement head
125
3.5.2.9 Technical data for SIPLACE MultiStar (CPP)
3
SIPLACE MultiStar
component camera type 30 (CPP)
SIPLACE MultiStar
component camera type 33 (CPP)
Component range
a
a) Please note that the placeable component range is also affected by the pad geometry, the customer-spe-
cific standards, the component packaging tolerances and the component tolerances.
01005 to 27 mm x 27 mm 0402 to 50 mm x 40 mm
Component spec.
max height
b
max. height
c
min. lead pitch
min. lead width
min. ball pitch
min. ball diameter
min. dimensions
max. dimensions
max. weight
b) CPP head: in low installation position (stationary component camera not possible).
c) CPP head: in high installation position
6.0 mm
8.5 mm
0.3 mm
0.15 mm
0.25 mm
d
0.35 mm
e
0.14 mm
d
0.20 mm
e
0.4mm x 0.2mm
27 mm x 27 mm
4 g
d) For components < 18 mm x 18 mm
e) For components ≥ 18 mm x18 mm
11.5 mm
0.3 mm
0.15 mm
0.35 mm
0.2 mm
1.0 mm x 0.5 mm
50 mm x 40 mm
8 g
Programmable set-down
force
1.0 - 10 N 1.0 - 10 N
Nozzle types 20xx, 28xx 20xx, 28xx
X/Y accuracy
f
f) The accuracy value, measured using the vendor-neutral IPC standard.
± 41 µm/3
± 55 µm/4
± 34 µm/3
± 45 µm/4
Angular accuracy ± 0.4° / 3
g
, ± 0.5° / 3
h
± 0.5° / 4
g
, ± 0.7° / 4
h
g) Component dimensions between 6 mm x 6 mm and 27 mm x 27 mm.
h) Component dimensions smaller than 6 mm x 6 mm.
± 0.2° / 3
± 0.3° / 4
Illumination level 5 6
Possible illumination
level settings
256
5
256
6